Jump to content


ENP10's Content

There have been 47 items by ENP10 (Search limited from 11-November 96)


By content type

See this member's


Sort by                Order  

#357677 Alphahawk prime

Posted by ENP10 on 24 January 2017 - 06:43 PM in Modifications

Is there any way to open the Alphahawk after attaching the priming bar?




#357664 Walgreens weird blasters.

Posted by ENP10 on 23 January 2017 - 10:41 PM in General Nerf

Never seen that nitefinder. I didn't know that they were exclusives.



#357441 Questions about The Mad Ghost by, 3DBBQ

Posted by ENP10 on 04 January 2017 - 10:52 PM in Homemades

Thank you for all the help you guys have given me. After reading a few topics about rscbs and a few other things I think I have finally figured out how i will make this.



#357415 Questions about The Mad Ghost by, 3DBBQ

Posted by ENP10 on 03 January 2017 - 06:29 PM in Homemades

Also be aware that 3DBBQ is JSPB, based in Taiwan. He's usually pretty good about designing to regional standards, and pops up here on NH every year or two with a new build. I tried building a printable Mad Ghost awhile ago (basically a Mad Ghost with a few printed fittings), but haven't been able to find valves that work well enough near me.
 
1/2" CPVC should fit elite darts, bring one to test fit in the pipe you're buying as you're dealing with pipe and not tightly-controlled tubing so the ID's vary quite significantly.

 
 
how would i size the barrel down for elites? by nesting 1/2 cpvc in the 1/2 pvc?



#357391 Questions about The Mad Ghost by, 3DBBQ

Posted by ENP10 on 02 January 2017 - 06:10 PM in Homemades

So I am considering making The Mad Ghost by 3DBBQ but before i go off making my first ever homemade i have a few questions.

(Please bear in mind that i am basically a homemade noob.)

 

1. what keeps the darts from falling straight out the barrel?

 

2. In The writeup here on nerfhaven they make it to shoot megas if I'm not mistaken, is there anyway you could make it shoot elites? i would assume you would just change the barrel sizes but i don't really know.

 

3. i'm assuming that the PVC sizes are standard USA sizes. is that correct?

 

4. where can i find the correct valves/tubing for the trigger?

 

All help is appreciated. and i'm sorry if any of these questions are completely stupid. Thanks! ENP10-




#357069 FalconFire is now on amazon

Posted by ENP10 on 08 December 2016 - 12:44 PM in General Nerf

If you didn't know, the Accustrike FalconFire is on Amazon right now for 14.99 USD [url="https://www.amazon.c...nerf accustrike



#357013 Ammo Counter: The Ultimate Simple & Cheap Guide

Posted by ENP10 on 03 December 2016 - 10:45 PM in Modifications

I will be selling both self-install kits and pre-installed into the available blasters of the customer's choice. More details to come in the future!


Ok thanks!



#356996 Ammo Counter: The Ultimate Simple & Cheap Guide

Posted by ENP10 on 03 December 2016 - 12:27 AM in Modifications

How will they be sold, In kits? Pre-installed?



#356970 Possible desolator mod

Posted by ENP10 on 01 December 2016 - 11:11 AM in Modifications

Ok thanks!




#356966 Possible desolator mod

Posted by ENP10 on 30 November 2016 - 11:58 PM in Modifications

So I'm looking to possibly get a desolator and I was wondering if it would be possible to do a rewire, motor upgrade, and run it off 8 (*Sigh* yes 8) AA Batteries using the built-in battery tray and adding another 4 in the stock. Yes yes I know what you will all say. ENP10 Just use a lipo! ENP10 Just use IMRs! I know that either of those would work better. But I just want to know if this would even be a possibility.



#356951 Beginners Flywheel Mod

Posted by ENP10 on 29 November 2016 - 05:40 PM in General Nerf

https://lmgtfy.com/?q=Soldering+iron

 

https://lmgtfy.com/?q=Dremel

 

Just look at up...




#356858 Batteries

Posted by ENP10 on 24 November 2016 - 10:05 AM in Modifications

But I will do more research (I may just use regular batteries).


If your going to use regular batteries, just remove the locks.



#356808 Should you save lock springs?

Posted by ENP10 on 21 November 2016 - 10:41 PM in Modifications

Ok! It was just a thought.



#356797 Should you save lock springs?

Posted by ENP10 on 21 November 2016 - 07:17 PM in Modifications

Is it worth saving lock springs for say? adding on the catches to make them stronger?




#356751 Strongarm barrel does not rotate on trigger

Posted by ENP10 on 18 November 2016 - 12:16 AM in Darts and Barrels

when you prime it then pull the trigger you mean? if not, that how it's supposed to work.




#356692 Nerf orange spray paint

Posted by ENP10 on 08 November 2016 - 06:40 PM in Modifications

Nerf uses a variety of oranges, depending on the blaster, you may want to use a different paint. I just use Duratrax Fourecent Orange for my muzzle tips sealed with a clear coat.


What clear coat do you use?



#356682 Modding Nerf rebel sweet

Posted by ENP10 on 08 November 2016 - 09:04 AM in Modifications

From looking at pictures it looks like you could but since I don't own either of these blasters I wouldn't know for sure.



#356678 Modding Nerf rebel sweet

Posted by ENP10 on 07 November 2016 - 10:50 PM in Modifications

Hi everyone!
For my first topic I will talk about modding the Nerf Rebel Sweet Revenge/Destiny.
First... I saw the handle was almost the same as the "4Victory"'s, so I wanted to know from you if it is possible to change the sweet's handle to put the 4Victory's.
Thx and bye


Why do you want to? As you said, they are pretty much the same.



#356676 Nerf orange spray paint

Posted by ENP10 on 07 November 2016 - 08:32 PM in Modifications

I dont know of any particular ones, but I do know that the color of the neon/fluorescent paints varies a little sometimes. best bet might be to buy a few different kinds and see whats close, just remember to put down a white basecoat so its as bright as possible.


The main coat will actually be white anyway :P



#356659 Nerf orange spray paint

Posted by ENP10 on 06 November 2016 - 10:46 PM in Modifications

does anyone know of any nerf orange spray paint? i need it for a upcoming project.




#356634 Retaliator AR

Posted by ENP10 on 05 November 2016 - 12:23 PM in Modifications

For stock (ish) dart purposes, no. Keep the AR in. 

 

The newer Nerf blasters have ARs that don't majorly decrease performance and also protect the blaster from breakage. 

 

If you plan on brass breeching, (or aftermarket stefan breeches), then removing the AR is required. 

I plan on only ever using stock darts in it.




#356630 Retaliator AR

Posted by ENP10 on 05 November 2016 - 09:23 AM in Modifications

Is it worth taking out the retaliator AR? I have see multiple guides that take out the AR but does it
really help?



#356619 i need some recommendations for modding my big shock

Posted by ENP10 on 04 November 2016 - 11:10 AM in Modifications

you could mod it to shoot rival HIR or elite darts but otherwise there isn't much else i think you could really do.




#356616 Best way to go about a pump action retaliator

Posted by ENP10 on 04 November 2016 - 09:05 AM in Modifications

13$ is way too expensive, 
5$ max for a recon lol

 

it was just the first one i clicked on. :P

 

kinda off topic but I will also be giving the retaliator a whiteout paint job.




#356610 Best way to go about a pump action retaliator

Posted by ENP10 on 03 November 2016 - 09:59 PM in Modifications

can't find a recon?
I know someone that has for pretty cheap, *calls in wild DX*

Otherwise, I can try and make a PVC version lol, 

 

 

Oh i can find one. http://www.ebay.com/...B8AAOSwnbZYDnpM (also i would rather find one while thrifting then order one online)

i just can't decide which way i want to go.

 

i am leaning towards making my own as i said on a earlier post using polycarb or metal bars that are connected to the bolt sled and the retaliator grip.




#356606 Best way to go about a pump action retaliator

Posted by ENP10 on 03 November 2016 - 05:56 PM in Modifications

I love my stuff on this thread,
in fact let me plug in another thing I did for the retaliator here

http://nerfhaven.com...ide-vgr/?hl=vgr


I think I like the aesthetics, and I spent like, 10$ total on it? with like 2 hours?
(Pic from PSU) 
attachicon.gifScreen Shot 2016-04-11 at 1.10.30 PM.png

 

 

As i said at the beginning of this post, i don't really want to go out and buy another recon/retaliator and the chances of finding one while thrifting is pretty slim. the best thing I've found is a buzz bee double shot.




#356595 JSPB3D

Posted by ENP10 on 02 November 2016 - 09:02 PM in Homemades

It's called a ball pump. Basically any store sells something like it, I found mine at Big-5 but I've since noticed them everywhere (Saw one at Target) and they're all probably basically the same. They're more or less expensive depending where you go and what (totally unnecessary for our use) extras they have, expect ~$8 unless you get one online though.


Thank you! :)



#356569 Gun computer MkIV

Posted by ENP10 on 02 November 2016 - 08:20 AM in Modifications

A toster! Jk

The only thing I could think of would be to put some sort of intergration in the front.





Maybe a battle song speaker? :P



#356564 Best way to go about a pump action retaliator

Posted by ENP10 on 01 November 2016 - 10:02 PM in Modifications

I will most likely end up making my own partly using this write up: http://nerfhaven.com...te-up-included/
But if I do it may still be awhile till I can since the tools I would need I only have access to sometimes.



#356561 JSPB3D

Posted by ENP10 on 01 November 2016 - 08:59 PM in Homemades

You don't. It just makes some things somewhat 'easier' - in that I don't actually need to fabricate parts and can instead do something else while my machine does it for me*
 
*Provided the machine is working, set up properly, and files exist for the parts I want to make.


Thank you for that link :)

Does anyone know where you can a pump like this one in the USA?



#356557 Best way to go about a pump action retaliator

Posted by ENP10 on 01 November 2016 - 08:39 PM in Modifications


So I have a retaliator I'm looking to mod. I know I want it to be pump action but I don't know which way to go about doing it.

I don't have a recon/retaliator on hand (other then the one I'm already using) and I don't really want to go out and buy one so a VGR is pretty much out.

I don't really want to buy the worker kit because of the prices of shipping.

So it is pretty much either between gavin fuzzy's kit or make my own unless there's is some other kit I'm not aware of.



#356543 Magic Mega Barrels?

Posted by ENP10 on 01 November 2016 - 02:30 PM in Darts and Barrels

Ive already used the cpvc for simple 1/2inch to 3/4inch converters, but it is a twist fit. A very, very tight twist fit.


You could sand down the inside a bit but I don't think it would be worth it.



#356536 Magic Mega Barrels?

Posted by ENP10 on 01 November 2016 - 12:39 PM in Darts and Barrels



I did some looking and you could try 3/4 cpvc or 3/4 sch80 pvc but other then that I wouldn't know.



#356490 JSPB3D

Posted by ENP10 on 29 October 2016 - 03:36 PM in Homemades


I wish you didn't have to have a 3d printer for pretty much all the homemades I would like to make. :/



#356445 Cyberpunk Strongarm

Posted by ENP10 on 27 October 2016 - 11:13 AM in Modifications

It looks better then my first paintjob. XD



#356443 Cyberpunk Strongarm

Posted by ENP10 on 27 October 2016 - 10:23 AM in Modifications

That paintjob looks great!! Have you painted any other blasters before this one?



#356304 Who Needs An Elite Disruptor...

Posted by ENP10 on 17 October 2016 - 01:43 PM in General Nerf

Yeah I've been hoping it's not just a Easyloadstrongarmwiththebitstakenoff but I have a feeling thats what it is.




#356152 Nerf Retaliator Slam Fire Kit!

Posted by ENP10 on 06 October 2016 - 10:45 PM in General Nerf

I may have to get myself one of these for a future project.



#356141 The Modding Mistakes Thread

Posted by ENP10 on 06 October 2016 - 11:57 AM in Modifications

Always re-lubricate moving parts! Especially moving parts that have been painted!



#356140 Shields: Do you love them? Hate them? Ban them? Permit them?

Posted by ENP10 on 06 October 2016 - 11:52 AM in General Nerf

We have a member of the South East Nerf club that regularly uses the stonewall shield in his left hand and a Slingfire in his right (because he can prime it with one hand obviously). He is very good at blocking incoming fire with it.  I'm seriously considering trying one out myself.



Oooooooooooooooh! Another Nerfer from Tennessee!