Jump to content

AnOoB's Content

There have been 40 items by AnOoB (Search limited from 20-March 93)

By content type

See this member's

Sort by                Order  

#358961 Bulk mags

Posted by AnOoB on 01 April 2017 - 09:35 AM in General Nerf

These magazines are horrible, I ordered 2 and one of them arrived broken. The other one broke later. Plastic is brittle, didn't feed well and you have to file down the magazine catch slot.

#358267 Blasters for Newbie Modders

Posted by AnOoB on 27 February 2017 - 06:13 PM in Modifications

I think the Nitefinder is a good example, it's a simple pullback springer pistol.

you can remove the air restrictor, swap the spring, rebarrel it...

all relatively simple mods.

and for cosmetics, it's not an expensive or big blaster so messing up a paintjob wouldn't be a big deal.

#357398 motors hot

Posted by AnOoB on 03 January 2017 - 07:56 AM in Modifications

You can also double-check that your flywheels are consistent.


what do you mean?

is it a problem if my FWs are not perfectly in the middle of the FWC?

how do i get my motors/flywheels to sit straight?

#357359 motors hot

Posted by AnOoB on 30 December 2016 - 05:17 PM in Modifications

I am using 2 MTB rhino's in my rayven and after a little bit of testing i noticed the motors got quite hot. Is this normal or is there something wrong? One motor gets hotter than the other, don't know why.

#356889 Question

Posted by AnOoB on 26 November 2016 - 07:09 PM in Darts and Barrels

Boom: http://m.ebay.com/it...cc83%7Ciid%3A17
Please search instead of ask next time. This cost me only one minute to find.

#356639 aluminium tubes

Posted by AnOoB on 05 November 2016 - 11:28 PM in Darts and Barrels


#356637 nerfhaven threatens to shut down MY ISP?

Posted by AnOoB on 05 November 2016 - 11:18 PM in Site Feedback


#356579 aluminium tubes

Posted by AnOoB on 02 November 2016 - 12:25 PM in Darts and Barrels

Pushing the dart forward and out of the magazine is better because


1. It allows you to use whatever length of dart you want to

2. It allows you to use whatever length of barrel you want to.


Breeches that would similarly to the stock ones have a very limited effective barrel length and are much more prone to clipping or crushing darts.

ok thanks, but how would i make that? how can i make the original breech seal to the barrel?

#356487 aluminium tubes

Posted by AnOoB on 29 October 2016 - 06:00 AM in Darts and Barrels

usually you see a breech where the dart goes into the original breech but there is brass in there, then that slides over a smaller diameter tube in the barrel. (right?)

would it have any positive effect on performance to do the aluminium insert but no longer barrel? (because there is only one size of aluminium)

or is the artifact style breech better. (and why?)



In theory you can. But the system works like a universal breech with a pusher, that pushes darts into the barrel, then seals it. Whether its effective or not is up to how you do it. And once again, theres no better, its just how you make it work, and how you like it. More then likely you wont be able to make it full length darts, its up to you to design and make it possible, but I haven't see it done yet. and uh... I guess, but you'll have to figure out your own way, and it may be better, but it depends on your mods.

so what is the right way to do it?

#356465 aluminium tubes

Posted by AnOoB on 28 October 2016 - 03:29 PM in Darts and Barrels

could I make an artifact style breech myself?

so the original breech bit pushes the dart into the barrel?

would that work effectively or is a normal brass breech better?

would it work with full length darts?

can i put the aluminium into the original breech and would that be better than the stock breech?

#356430 aluminium tubes

Posted by AnOoB on 26 October 2016 - 05:05 AM in Darts and Barrels

i found this taobao listing: https://world.taobao...4.527668513455#


does someone know if i could use this for a LS breech?

#355213 Nerfing In Make Magazine?

Posted by AnOoB on 26 July 2016 - 08:25 AM in General Nerf

i'm sorry to reply to such an old topic but make magazine made an article about nerf:


#355060 Dutch Nerf War (looking for dutch nerfers)

Posted by AnOoB on 18 July 2016 - 08:36 AM in Nerf Wars

Hahahahaa d.a.n.k. is changed into sub-optimal

#354968 Dutch Nerf War (looking for dutch nerfers)

Posted by AnOoB on 13 July 2016 - 03:21 PM in Nerf Wars

dit wel: https://www.instagra...by=jaymodz.nerf

ik kan helaas niet, heb een wedstrijd precies die dag.

andere nl nerf modders: https://www.instagram.com/nlnerfmods


https://www.instagram.com/iameric6o4 en die van mij: https://www.instagram.com/02lars0_o/

het is handig als je een instagram acc hebt, de meeste andere nederlandse nerfers gebruiken insta om hun mods te delen etc


edit: de links lijken niet te werken maar je kunt ze in je url balk kopieren

#354886 clear 18 mags

Posted by AnOoB on 09 July 2016 - 12:57 PM in General Nerf

these look really good: http://www.ebay.com/...MUAAOSwvFZW6272


Did anyone try them? i am just asking to be sure.

#354611 Recon MKII barrel extension won't fit ?

Posted by AnOoB on 27 June 2016 - 05:14 PM in Darts and Barrels

Hey! Een Nederlander? Ben jij misschien Thijs, Teun, Eric of jay? *EDIT: Ik zie dat je roy heet, ik let ook niet op.* Zo niet, dan heb ik weer een niewe Nederlandse NERFer om aan mijn verzameling toe te voegen. (Grapje natuurlijk)

In english: hey, someon from the Netherlands? Are you (couple of names)? If not, then i have a new dutch NERFer to add to my collection. (Just kidding)

Edit: i dont know why i wrote it in Dutch first, i think i did because of the surprise that i found another Dutch NERFer.

#354566 Recon MKII barrel extension won't fit ?

Posted by AnOoB on 25 June 2016 - 07:10 PM in Darts and Barrels

it looks like you are doing nothing wrong and it is just  a lemon.

#354440 battery charger

Posted by AnOoB on 21 June 2016 - 04:13 PM in General Nerf

i guess this would be a better but affordable charger?


#354434 One handed strongarm?

Posted by AnOoB on 21 June 2016 - 03:18 PM in Modifications

this is a video of a clip fed stockade: 

but just read the desription of the video

#354387 battery charger

Posted by AnOoB on 20 June 2016 - 02:12 PM in General Nerf

2S/3S? Just go to Hobbyking. $7 for a basic charger, and they have warehouses all over the world. http://www.hobbyking...ct_Charger.html

thnx! i didnt see that one at hobbyking.



If your getting inexpensive lipo batteries, invest the extra and get a quality charger, instead of going inexpensive for both (using the word cheap has to many meaning which is why I didn't)

can you explain why? because otherwise i am just going for the charger that Silverhead linked. I dont think it really matters though, that charger is so inexpensive that i can just buy another one if i'll be using more lipo's.

#354350 battery charger

Posted by AnOoB on 19 June 2016 - 04:31 AM in General Nerf

i didn't get the battery yet but what do you mean with the sake of compatibility?

To be able to use it in AEGs and in nerf blasters?

#354341 battery charger

Posted by AnOoB on 18 June 2016 - 03:25 PM in General Nerf

So i've wanted to mod my stryfe for a long time and i've been searching for a battery, motors etc. but the only problem i have is finding an affordable charger: https://www.conrad.n...cks-237921.html


It is so cheap that i wasn't sure whether it is just really crappy or not.

The page is in Dutch but you can auto-translate it with google chrome or put it in translate.

hopefully someone can tell me if it is any good.


EDIT: i want to use it for this battery: http://www.hobbyking...idProduct=31972

#354217 Ravenshot (Hammershot Carbine Conversion)

Posted by AnOoB on 15 June 2016 - 07:56 AM in Modifications

Wait, your first mod is a commision?

#354178 Ebay Stock Dart and Acronym Guide

Posted by AnOoB on 14 June 2016 - 08:44 AM in Darts and Barrels

The strange thing is that i got 240 fps quite consistently with elite darts and a pvc barrel in which the darts could move freely on my 4B without the oprv plugged, how would you explain that? Now i am using cut down fvjs and it seems to be very accurate.
Edit: you were right, i thought the velocities were consistent but now i think about it they were varying in the precise way that you described. Still, cut down fvjs seem to be very accurate.

#354014 Ebay Stock Dart and Acronym Guide

Posted by AnOoB on 06 June 2016 - 02:10 PM in Darts and Barrels

I cant measure it right now but it does fall out if i keep it upside down, i have had access to a chrony a couple of weeks ago and most times it gets around 240 fps so i guess it works fine. Somewhere else i read that with a good airgun fit the dart wil slide out on its own but go really slow if you keep your finger on it.

#354007 Ebay Stock Dart and Acronym Guide

Posted by AnOoB on 06 June 2016 - 10:59 AM in Darts and Barrels

The barrel i am using at the moment is pvc and being sold as 5/8" when i put a dart in it is not snug but can move freely although you almost cant see past the dart through the tube. Is that ok? Or should it grip my darts tighter?

#353982 Ebay Stock Dart and Acronym Guide

Posted by AnOoB on 05 June 2016 - 08:05 AM in Darts and Barrels

I know that cutting them down helps, i just wanted to tell you guys because only the ACCs do it. my FVJs and elites don't. (of course elites fly everywhere because of the hole)


what barrel length would you advise me to use for a couplered 4B?

i dont use a hopper because i cant get stuff like Y pieces here in the netherlands. 

#353958 Ebay Stock Dart and Acronym Guide

Posted by AnOoB on 04 June 2016 - 08:11 AM in Darts and Barrels

I've tried ACCs in my 4B but they just start tumbling mid air everytime

#353886 Ebay Stock Dart and Acronym Guide

Posted by AnOoB on 01 June 2016 - 08:24 AM in Darts and Barrels

Is there a best flywheel blaster dart for the rayven?

Koosh darts are really nice with flywheel blasters

#353836 Post your DIY/Maker/Craft/Mod hobbies

Posted by AnOoB on 29 May 2016 - 02:47 PM in Off Topic

I am a little bit into bowmaking, cant show you though because they all broke or failed. And i make my own arrows because its cheaper.

Some of my arrows:

I also made different atlatls and some atlatl darts, an atlatl is a spear throwing device that basically make your arm longer and it hooks into the back of the darts. These are a basic atlatl and a dart:

#353039 Thursday Night Chatroom Discussion: Recruiting/Getting New People

Posted by AnOoB on 25 April 2016 - 02:24 PM in General Nerf

Too bad this is at 4 am for me...
I don't think these chats will ever be at another time?

#352835 Unknown air blaster

Posted by AnOoB on 17 April 2016 - 03:50 AM in General Nerf

so this is it from the inside.

I finally decided to buy it, it was 5 euro, but shipping in the netherlands is extremely expensive, so in the end it cost me 12.

Is that little black thing the overpressure valve?

Spring inside the end of the pump rod.

It says ES toys, tried googling it but found nothing.

It seems that the orange bit stores the air and the black part just houses the pump?

Curious what i could do with this, i have no experience with air blasters so if someone can tell me if this is worth modding, i am curious to hear.

#352777 Rhode Island April Nerf War

Posted by AnOoB on 13 April 2016 - 08:22 AM in Nerf Wars

So a singled titan is ok?

#352640 Unknown air blaster

Posted by AnOoB on 07 April 2016 - 08:56 AM in General Nerf

I found this blaster on marktplaats (dutch ebay-like website) and at first i thought its a BBBB. I asked the seller and he said it is a BBBB, after looking more closely i wasn't sure anymore so i thought it would be best to post it here on nerfhaven. I hope someone can help me because i've already told the seller i want to buy it.

#352568 Looking for the ideal Nerf rifle

Posted by AnOoB on 02 April 2016 - 01:22 PM in General Nerf

I know this is not what youre looking for but if you want to actually hit people at a bigger range and the games you play allow them. i recommend looking at larp arrows.


#352132 NERF Rampage

Posted by AnOoB on 11 March 2016 - 10:30 AM in Modifications

I believe it may be the lock that keeps the jam door closed while the priming handle is not in the back position

No, that's a little knob on the boltsled. This comes from under the plungertube.

#352116 Dutch nerfers?

Posted by AnOoB on 10 March 2016 - 03:31 PM in Nerf Wars

I was wondering if there are any Dutch nerfers on NerfHaven because i have seen a lot dutch people in the comment section of videos from nerftubers.

Please react if you are dutch or know someone dutch on NerfHaven.


#351496 Snapbow Mk. V, Revised

Posted by AnOoB on 14 February 2016 - 06:41 AM in Homemades

I understand that the size of the PC tube stands for the inner diameter? Because then i have bought a wrong size.

#351356 imperial units

Posted by AnOoB on 05 February 2016 - 03:48 AM in Homemades

Thank you guys,
I'm definitely going to look up those metric writeups.

#351340 imperial units

Posted by AnOoB on 04 February 2016 - 11:21 AM in Homemades

I have been wanting to make a homemade blaster for a really long time and decided to begin.

Almost immediately i came to the point that i failed to understand the sizes of all the parts.

I hope someone is willing to help me out and explain how this works.


link for writeup: nerfhaven.com/forums/topic/20296-snapbow-mk-v-revised/


i´m sorry for my bad english, i am not a native speaker.




please explain this: