- NerfHaven
- → kbk652's Content
kbk652's Content
There have been 40 items by kbk652 (Search limited from 11-November 96)
#343008 NENO 11
Posted by kbk652 on 23 November 2014 - 12:56 AM in Nerf Wars
Event location
Starts at 10 be there ready to go for 10
75 Cliff street ( park on the strret and enter through the side gate meet at the well)
New Haven Ct
06511
What to bring
Primaries like 2 to 3 we all have loaners and if everything goes wrong we got you covered.
Darts last war we ran out so bring a lot more than 100
Bring some money you never know what’s there and we may buy more pizza like we’ve been doing for a awhile now
Its new England bring something approiate to wear its late November early December it might snow.
What not to bring
A shitty attitude its super fun don’t be an ass
Blaster restrictions
Eh him pretty relaxed about everything just don’t be an ass
Rounds
3-15
Freeze tag
DTC
And many more
#342001 N.E.N.O. 10 IT'S HERE!!!!
Posted by kbk652 on 17 September 2014 - 11:11 AM in Nerf Wars
Where is this awesome war?
75 Cliff St,
New Haven, CT
06511
When is it: October 19th
Start time: 10 am get there for 9:30 if you can
What to bring
Primaries 2-3 is good, I have some loaners and you never know what’s going to happen
Darts lots of darts but 100 to 200 is good. We will dart sweep.
Pistols, we might do a pistol round, depending on everyone.
Bring some money we have been ordering pizza and we might do it again, plus you never know what magical blasters will be there.
Bring water, it is New England weather we will be doing a lot of rounds and don’t want you going down.
What not to bring
Do no bring a shitty attitude were all here to have fun, and we always do so don’t be that guy.
Do not bring any darts besides # 6 or #8 slugs or stock darts
Blaster restrictions will be done at the war I am very lax about them but I do have the right to ask you to put something down if it’s too much.
Bring something cool for a raffle
Any questions feel free to ask
#340009 Anyone have an interest in Foam
Posted by kbk652 on 04 July 2014 - 04:00 PM in Darts and Barrels
#339519 Q&A with Hasbro Engineers
Posted by kbk652 on 12 June 2014 - 04:10 PM in General Nerf
#337177 Plusbow prototype
Posted by kbk652 on 20 February 2014 - 09:34 PM in Homemades
In a few weeks me and my friend are going to go into the shop and make a few different ones. This was designed as to see what people thought I have already been changing around the design. I would make a different one with a finished product way before I sold any.To be honest with you. I think you would be better off if you took some time to build a few and revise and perfect your design before you try to start selling them off to people. The reason roboman has been able to get so much attention is because he has the reputation of making some amazing things. Just because you have the tools doesn't mean you can pull off crazy designs. I would start by proving that you can make some quality things with those big expensive machines that you have access to. Just some friendly advise before you get stuck with 20 people bugging you about commissions and out 125$.
EDIT Also, 9000 people aren't a fan of your design and 9001 people think polls are dumb.
#337074 Plusbow prototype
Posted by kbk652 on 15 February 2014 - 11:42 PM in Homemades
Like I said I haven't built one yet so if people were interested in it now I would quote at that price not knowing how long I would be in the shop for. after building some I might change the cost depending on how much time and work actually goes into one. On the design part I really just wanted to try something different I don't want to copy someone else's hard work and sell it.
So the price 125 will be for now and once I make them I may have to raise the price.
What aluminum were you using? Also the machine is a haas sminimill, and the S-10 lathe, I believe we have the TM-1 in the other shop.
#337070 Plusbow prototype
Posted by kbk652 on 15 February 2014 - 10:40 PM in Homemades
#337065 Plusbow prototype
Posted by kbk652 on 15 February 2014 - 09:37 PM in Homemades
I made so quick changes based on some feedback, just a quick model.
I added in a cheek rest that is adjustable with the back for however people want.
I added in round edges on the handle, I may go in with like detailing for like your fingers but havent gotten to it yet. I may change the red piece to make the grip feel better.
I made the front priming grip alittle bigger and more of a cup for your hand.
I feel like a good offering would be on the priming bars, I will engrave something, like a username, name stuff like that.
Let me know what you guys think of this?
#337033 Plusbow prototype
Posted by kbk652 on 14 February 2014 - 08:05 AM in Homemades
The handle is not as square as shown it actually has quite a tapered edge, but this is the part I am trying to get printed so I can test out how it feels before I move to the real material.
The aluminum sides they are all made from 1/8" aluminum and I do not see any issues with the stresses coming but if someone wanted me to not drill the holes lol well that's simple enough.
I like the idea of something to rest on, I may change the back hole pattern to say like 1/8 holes so that whatever I use back there is adjustable for people and not just one huge piece of say plastic.
Thanks for the suggestions
EDIT: I made a quick model of a more uniform side plate.
#337028 Plusbow prototype
Posted by kbk652 on 13 February 2014 - 11:41 PM in Homemades
I'm not a big fan of the handle, and with so many holes, it looks "too busy" in my opinion, and loses elegance.
Just curious of what part you are referring too? the handle the part where your hand goes only has the two holes are you referring to the priming sides or the holes in the back near the stock area?
#337022 Plusbow prototype
Posted by kbk652 on 13 February 2014 - 09:21 PM in Homemades
First I want to give thanks where it is due, roboman was awesome and gave me some models and it was a great starting point.
Specs
All the red is 1/8 inch aluminum and the black except the priming bars is a plastic
Has 7" of draw on a full [k26]
Uses a rainbow catch
A 1.5 OD plunger tube and 1.375 ID
Need to put some small detail works and the catch.
Before I start machining anything I am looking to print the handle if anyone can help me out let me know the dimensions are 1.25" X 3" X 12"
If you are interested in one PM me and I will gladly work something out with you
#336841 What's a good replacement?
Posted by kbk652 on 03 February 2014 - 06:00 PM in Modifications
I contacted him and I dont mind paying the money its just he said it would take quite some time like up to a month.If you're willing to shell out a bit of money you could always try to contract roboman for an aluminum 5k tank. I thought I saw one of his posts about them a while back, but I'm not really sure.
#336838 What's a good replacement?
Posted by kbk652 on 03 February 2014 - 04:14 PM in Modifications
#336832 What's a good replacement?
Posted by kbk652 on 03 February 2014 - 02:51 PM in Modifications
So my question is what is a good replacement tank?
Like fits well, all that, would it be best for me to buy another sm 5k tank or use something different? If you have a sm5k tank that your willing to part with pm me
Kevin
#331125 Stampede Problems
Posted by kbk652 on 21 June 2013 - 08:39 PM in Modifications
#331123 Stampede Problems
Posted by kbk652 on 21 June 2013 - 08:10 PM in Modifications
Thanks
Kevin
#330804 Modification and Paintjob Pictures
Posted by kbk652 on 12 June 2013 - 12:02 AM in Modifications
#329900 Modification and Paintjob Pictures
Posted by kbk652 on 16 May 2013 - 08:04 PM in Modifications
- NerfHaven
- → kbk652's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·