- NerfHaven
- → Eraser475's Content
Eraser475's Content
There have been 85 items by Eraser475 (Search limited from 08-December 96)
#324939 Modification and Paintjob Pictures
Posted by Eraser475 on 30 December 2012 - 07:23 PM in Modifications
#323125 Buzz Bee Cougar
Posted by Eraser475 on 28 October 2012 - 02:26 PM in Modifications
#319080 Homemades Picture Thread
Posted by Eraser475 on 24 July 2012 - 09:47 AM in Homemades
I haven't measured ranges yet.
#319053 Modification and Paintjob Pictures
Posted by Eraser475 on 23 July 2012 - 07:25 PM in Modifications
#315350 Modification and Paintjob Pictures
Posted by Eraser475 on 07 May 2012 - 08:03 PM in Modifications
Added a tactical rail from a busted Reflex slide to my custom Xploderz Xblaster 200:
#315277 Add a trigger to the Xploders Xblaster 200
Posted by Eraser475 on 05 May 2012 - 08:28 PM in Modifications
Instructions for adding a stock added:
#315258 Modification and Paintjob Pictures
Posted by Eraser475 on 05 May 2012 - 04:31 PM in Modifications
Just 2 screws holding a 1/2" PVC endcap on the back of the blaster:
#314687 Rockets for Nerfers
Posted by Eraser475 on 22 April 2012 - 09:52 PM in General Nerf
#314635 Add a trigger to the Xploders Xblaster 200
Posted by Eraser475 on 21 April 2012 - 11:16 AM in Modifications
Really glad this popped back up here right when I found two of these babies. There's one thing that bugs me though that I've never understood about clothespin triggers, how does a vertical nail get up and over the plunger head. The way I'm looking at it, it seems like it would just get stuck where the nail is and not catch.
Great mod on a widely available blaster. Seems like people have just been overlooking these because the lack of triggers when we all shoulda been rocken em. Imma go take a look at the bigger xploders models. Springer primaries in every major retailer? I'm excited.
Thanks!
The nail is ground at an angle at the end so the catch will slide down and then back up, so the plunger won't move until you pull the trigger. Not sure if this makes sense, but It is hard for me to put into words.
#314626 Add a trigger to the Xploders Xblaster 200
Posted by Eraser475 on 20 April 2012 - 10:52 PM in Modifications
#314568 Add a trigger to the Xploders Xblaster 200
Posted by Eraser475 on 20 April 2012 - 06:43 AM in Modifications
Ranges added.
With a 12 stefan hopper with a homemade wye (http://www.nerfrevol....php?f=9&t=3317) and a 12" cpvc barrel, it averages around 83'
Singled with a 14" cpvc barrel, it averages around 90'
All tests done with Revisionfive's Pool noodle darts (http://www.nerfrevol...php?f=26&t=3633)
Here is a picture of the wye I used:
#314203 Rockets for Nerfers
Posted by Eraser475 on 09 April 2012 - 05:43 PM in General Nerf
#314198 Rockets for Nerfers
Posted by Eraser475 on 09 April 2012 - 04:20 PM in General Nerf
#313866 Rockets for Nerfers
Posted by Eraser475 on 01 April 2012 - 10:07 PM in General Nerf
#313754 Rockets for Nerfers
Posted by Eraser475 on 30 March 2012 - 05:13 PM in General Nerf
Edit: Got it on Nerf Mods and reviews: http://www.nerfmodsr...rt-rockets.html
#313484 Rockets for Nerfers
Posted by Eraser475 on 24 March 2012 - 02:25 PM in General Nerf
#313468 Rockets for Nerfers
Posted by Eraser475 on 24 March 2012 - 10:49 AM in General Nerf
#312673 How I deal with spiders
Posted by Eraser475 on 10 March 2012 - 01:28 PM in General Nerf
#312429 Help Identifying Nerf Type Blaster
Posted by Eraser475 on 04 March 2012 - 05:38 PM in General Nerf
Supposedly Makeitgo has something similar.
#312289 Nite Finder Rifle 2.0
Posted by Eraser475 on 02 March 2012 - 11:17 PM in Modifications
#312080 Clear Blaster Tinting
Posted by Eraser475 on 28 February 2012 - 11:07 PM in Modifications
Try it out. If it doesn't stick you can just wash it off and you're not really at a loss. I bet it will work though.
For those who would like to get a really strong tint without waiting forever, mix up your dye and hot water, then add a generous splash of acetone. You really have to be careful not to leave it in for too long, and to be on the safe side you should make sure to use the lower concentration cosmetic stuff, but the acetone makes the plastic just drink up the dye. It'll still be largely transparent if you don't leave it in for too long.
How long would be too long? I really want a trans colored nf now!!!!
#312015 Clear Blaster Tinting
Posted by Eraser475 on 28 February 2012 - 08:13 AM in Modifications
Would this work on polycarb? I would love a tinted pink +bow.
It might, but if it were sanded/frosted, it has a better chance.
#311982 Modification and Paintjob Pictures
Posted by Eraser475 on 27 February 2012 - 07:40 PM in Modifications
#311948 Clear Blaster Tinting
Posted by Eraser475 on 27 February 2012 - 01:57 PM in Modifications
#311550 Add a trigger to the Xploders Xblaster 200
Posted by Eraser475 on 20 February 2012 - 08:43 PM in Modifications
I devoted my time today to make a trigger for the Xblaster 200.
Materials:
1. Hot glue/ hot glue gun
2. Dremel w/ cutting disk
3. Zip ties
4. Xblaster 200
5. Sharpie
6. Drill/ Drill bits
7. Nail
8. Plastic Clothespin
9. Masking/electrical tape
10. Pliers
11. Angle bracket
Stock parts:
1. 1/2" PVC Endcap
2. 1/2" PVC 90 or 1/2" PVC TEE
3. Two small blaster screws (Mine are Tek-4 screws)
4. 1/2" PVC 45
5. Some 1/2" PVC
6. Drill/ Drill bit
Instructions:
First, get your Xblaster 200: (Excuse my rscb setup at the moment)
Here are the internals you NEED (Take note of the plunger rod):
Take this pin out of the plunger head:
Take the plunger apart (take note of the order of things):
Take the orange disc that was behind the white tube in front of the white tube. It should look like this:
Wrap take around the back of the white tube. Not too much, just enough to keep the spring behind it:
Fit the Plunger tube and Plunger rod back into the shell and fully draw the plunger rod. Then make a mark where it comes out of the shell:
Line up the mark you made with the back of the shell and make a mark where the orange disc we moved sits on the plunger tube:
Make a line along the bottom of the plunger tube and make a mark all the way around the plunger tube using your previous mark:
Drill in the center of the +:
Take your shell and cut an area like this out of it:
It should look like this:
Make a clothespin trigger like so: http://nerfhaven.com...showtopic=20296
(Adjust the nail as needed) I didn't use epoxy putty to fill it, it isn't holding back a [k26]. I filled it with hot glue after I put the nail in.
Glue it to the Plunger tube:
Put the plunger into the plunger tube:
Assemble the blaster with your choice of barrel system and enjoy your trigger! I am using a 3 streamline/6 stefan RSCB.
INSTRUCTIONS FOR ADDING A STOCK.
First, gather the materials:
Take the endcap, mark, and drill the holes like this (drill bit size depends on the screw size)
Drill corresponding holes in the back of the Xblaster:
Screw the endcap onto the back of the blaster:
Lay out the rest of the materials like so. (you can use a 1/2" 90 instead of the 1/2" tee)
Fit them all together. Glue is optional.
Attach it to the endcap:
Now it is all done.
MONEY SHOT:
I hope this helps all of you with these blasters and were pissed they didn't have a trigger.
With a 12 stefan hopper with a homemade wye (http://www.nerfrevol....php?f=9&t=3317) and a 12" cpvc barrel, it averages around 83'
Singled with a 14" cpvc barrel, it averages around 90'
All tests done with Revisionfive's Pool noodle darts (http://www.nerfrevol...php?f=26&t=3633)
Here is a picture of the wye I used:
#310642 Modification and Paintjob Pictures
Posted by Eraser475 on 03 February 2012 - 09:00 PM in Modifications
...looks like under a blacklight:
#310465 The Fiendfinder (Full write-up with lots of nice pictures)
Posted by Eraser475 on 31 January 2012 - 11:54 PM in Modifications
#310248 Good Singled Maverick
Posted by Eraser475 on 28 January 2012 - 12:40 AM in Modifications
#309811 Modification and Paintjob Pictures
Posted by Eraser475 on 19 January 2012 - 09:17 PM in Modifications
#309486 Modification and Paintjob Pictures
Posted by Eraser475 on 14 January 2012 - 12:41 PM in Modifications
Ar removed and improved seal Quick 16. Wasn't as tough to get together as some people made it sound. Then again, I might of just been lucky.
#309228 Modification and Paintjob Pictures
Posted by Eraser475 on 07 January 2012 - 11:59 PM in Modifications
#309065 Air Horn - Simplest mod ever!
Posted by Eraser475 on 03 January 2012 - 12:37 PM in Modifications
That'd be cool if someone took this idea and made a device that filled air tanks/bladders much faster than pumping.
People have have hooked a bladder up to a tank so their blaster can be semi auto for a while until the bladder runs out. Then they pump the bladder back up and fire all over again.
- NerfHaven
- → Eraser475's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·