- NerfHaven
- → PissBacon's Content
PissBacon's Content
There have been 174 items by PissBacon (Search limited from 07-December 96)
#35124 Titan, Too Much Power?
Posted by PissBacon on 25 August 2004 - 12:36 AM in Modifications
#35017 Titan: The Most Powerful Nerf Gun Ever
Posted by PissBacon on 23 August 2004 - 09:00 PM in Modifications
#34934 Ipod's Dirty Secret
Posted by PissBacon on 23 August 2004 - 02:09 AM in Off Topic
Personally, I'm waiting for the PSP.
#34564 Homemade Flash Bang Grenade
Posted by PissBacon on 19 August 2004 - 10:38 PM in Homemades
#34548 Squit Gun Mod/homemade 'thing'
Posted by PissBacon on 19 August 2004 - 08:51 PM in Homemades
I don't own a NF, and I'm not sure what a 'noid is. However, I can tell you where the switch is. If you look closely on the innards picture, you'll see where the trigger is connected to something with a bent metal rod. What it's connected to is the mechanism that opens the valve. On the very thing that presses on the valve pin is a rubber-covered switch which closes the circuit to the laser. It works quite well since the valve pin is held by a strong enough spring. So, to turn the laser on, pull the trigger a little, and then fire by pulling all the way.Oh, the light is operated by a 'noid, like on the NF, right?
#34522 Squit Gun Mod/homemade 'thing'
Posted by PissBacon on 19 August 2004 - 07:42 PM in Homemades
For about 2 weeks I've been working on gutting an old squirt gun (Storm 2000) out, and over the course of the project, I kept changing the innards more and more. Now that it's complete, I'd consider the inside more than half homemade. It's got an 18 inch aluminum barrel with back loading breach-like design. The barrel sounds long, but the volume of the tank makes sense for it. It's also got a laser in place of where some stupid light used to be on the squirt gun. I used the same battery compartment and the same on/off switch build into the trigger mechanism for the laser, and it works pretty nicely. Originally the barrel was much simpler, and I just shoved darts down. Using that design I got 170 feet flat with only 3/5 of the tank's maximum power (before pressure release kicked in). I'm new, and I'm guessing this has been done countless times before, but I'll post it anyway.
Innards, and a TT for scale
A look down the back of the gun, in case you don't understand how the breach works exactly.
The end stopper I designed. It goes in the back of the loading area and is tightened to create a seal.
This is where the laser was put in (front of gun).
This was heavily influenced by the R.s.c.b. loading system. The gun is basically a homemade fit inside of a squirt gun case for looks (however I did use a lot of the valves and stuff from the squirt gun). As for ranges, I'm going to be gone for a few days, and the epoxy won't be dry before then. Hopefully by posting the ranges I won't just be bringing back a dead topic.
Pretty picture
P.S. Sorry about the typo in the topic name (I'm such an idiot).
#34509 Hornet
Posted by PissBacon on 19 August 2004 - 06:17 PM in General Nerf
#34401 Hornet
Posted by PissBacon on 19 August 2004 - 03:26 AM in General Nerf
#33726 Problems With Screws On Titan
Posted by PissBacon on 11 August 2004 - 12:09 AM in Modifications
#33503 Tech Target Mod
Posted by PissBacon on 08 August 2004 - 06:11 AM in Modifications
-Smaller barrel for 1/2 inch (homemade) darts, also slightly longer
-No air restrictor
-Stronger spring
Since I took photos after doing the mod, I'll only have certain views.
http://tinypic.com/1kbrc
This is the gun opened with the (aluminum) barrel already in.
http://tinypic.com/1kbr8
As you can see, the barrel comes apart easily from the main part of the gun.
http://tinypic.com/1kbqu
This is an important part of the barrel. It has to be cut neatly out so that air is allowed through easily, and should line up with the inserted barrel.
http://tinypic.com/1kbr6
Finished product left side.
http://tinypic.com/1kbqg
Finished product right side.
If the pictures won't load, it's because I dont have photobucket yet, so the geocities site might be over its limit.
This gun gets a pretty good range; I measured around 65 feet angled based on 3 test fires. I know other people have modded this gun, but I thought some looked kind of sloppy, so I made this one clean looking. The main issue i have with this gun is that it is noisy for being a small plunger-type gun. I can't figure any practical ways to make the noise quieter without reducing range.
- NerfHaven
- → PissBacon's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·