- NerfHaven
- → Y-Brik's Content
Y-Brik's Content
There have been 145 items by Y-Brik (Search limited from 03-December 96)
#288351 Modification and Paintjob Pictures
Posted by Y-Brik on 13 November 2010 - 02:19 PM in Modifications
@Zack the Mack- Now I suddenly want a barrel break...
My new indoor primary:
BBB spring addition, brass stub in barrel, locks and other junk removed, krylon fusion PJ with rather sloppily applied detailing. Paired with an AT drum, prpbably the only reason to get an AT imo.
#280069 Homemades Picture Thread
Posted by Y-Brik on 12 July 2010 - 05:12 PM in Homemades
My adapted SNAP. Features 1.5" PVC plunger tube, new (To my knowledge) handle mount, and easy field stripping thanks to the way the stock is screwed onto the endcap. The gun field strips with 2 screws- there's only 4 total (not counting the stock).
The handle slots onto ridges cut into the PVC (This is one of the reasons it uses 1.5" PVC; 1.25" PVC is just too small. The slots are measured out to accept a LSFG handle, but mine broke (Damn you China!) and the PVC one serves me well.
8 round RSCB attachment with tacticool flashlight E-taped on. Stupid Windows photo gallery made the stock look crooked; it's not.
Ranges are ROUGHLY measured at 100'+
#296723 Homemades Picture Thread
Posted by Y-Brik on 27 March 2011 - 09:25 PM in Homemades
Uses [k26] over a nylon plunger rod, a skirt seal, Sch80 for the catch ring, and Ace#2 for the primary catch spring. It's held together with #6 wood screws, countersunk of course.
(Holes are drilled for a string stop; I have to get around to installing it)
I got my magic thinwall PVC at Do It Best- 10' for $4, you can order online and have it shipped to your local store free!
#288359 Homemades Picture Thread
Posted by Y-Brik on 13 November 2010 - 03:48 PM in Homemades
Little discovery- 45 degree PVC bell curves in the conduit section work great on choppers- it's made to funnel wires around a curve and works just as well with darts. I lopped about an inch off the male end (insert jokes here) of mine to keep a low profile, and used a little etape on clip and bell curve to keep everything snug.
Now, to an actual homemade- I got an ObsoleteBow awhile ago and have been making small adjustments to it.
The PVC foregrip is based around a 3/4"x1/2" PVC tee. Also, if you're building one of these (Why? There are RainBows now!), use 5/8" long screws on all nylon rod connections, and use lockwashers.
There's a new (to my knowledge) spring spacer- my long-winded description is on my flickr post. Spring now hits full compression, and the thing shoots hard.
#295035 Where To Buy Modding Materials
Posted by Y-Brik on 23 February 2011 - 10:53 PM in Modifications
I got my thinwall from Do It Best. They ship it free to your local store and it's $4 for 10'!
#286182 Guide To Barrel Material
Posted by Y-Brik on 27 September 2010 - 10:59 PM in Modifications
Home depot has CPVC. Ask someone or look harder. In my store it's stacked vertically next to the copper pipe. You need CPVC if you want to fire stefans; I don't think anyone has done a PVC singled LS. Oh, and judging by your post quality, the LS may not be the gun for you to mod. Have you even opened the thing? Is it your first mod? If the answers are what I think they are, forget it. Go get a 4B or a NF and learn before you try such a complex mod.
#293132 Community Snap Thread
Posted by Y-Brik on 19 January 2011 - 10:06 PM in Homemades
EDIT: I misspoke, I meant catchRAMP. My Snap uses a PVC catchramp attached to a metal washer for the catchface. Basically take the Superlative and replace epoxy putty with PVC.
#283752 Community Snap Thread
Posted by Y-Brik on 22 August 2010 - 03:03 PM in Homemades
#288075 Community Snap Thread
Posted by Y-Brik on 07 November 2010 - 09:53 AM in Homemades
A SNAP does not use a flat, vertical catch plate, but rather a pin contacting the plunger (rod or head), mounted on a clothespin trigger.
-The exclusion of a flat vertical cath plate rules out both Rainbow and Plusbow.
-The statement 'A pin contacting the plunger' is accurate with the CPT2 because, well, it does. It just adds a cradle to improve the catch surface area.
#339035 TR-27 GRYPHON - CR-18 Rapidstrike Mod
Posted by Y-Brik on 19 May 2014 - 11:37 AM in Modifications
A few observations/suggestions:
-Have you considered making the code interrupt-driven? It may be neater code, and save battery. Basically, instead of polling all the I/0 all the time, the arduino will "notice something has changed" and run the appropriate code.
-For user IO, I really like that OLED display, maybe integrated into the cheek rest if there isn't enough room where you have your ammo counter. I may be hitting the garage sale myself when the paycheck hits!
-If you go with the OLED display, consider a tactile 5-way switch for your input, accessible by the right index finger. Imagine tweaking firing control and other settings from there- and it's more discrete than the rocker switch. You may want to use your voltage divider trick there too, or give in and grab a shift register.
EDIT: More info on interrupts
#339060 TR-27 GRYPHON - CR-18 Rapidstrike Mod
Posted by Y-Brik on 20 May 2014 - 12:56 PM in Modifications
Like this one?I'd love to find a nice 3 position rotary switch what I could mount in such a way you can operate it with your right thumb, like the M16.
Or this one?
#286327 Snapbow Mk. V, Revised
Posted by Y-Brik on 01 October 2010 - 06:49 AM in Homemades
I have a 1.5" PVC Snap and have one notable updayte- Instead of potentially unreliable E-putty (Mine always crapped out on me), I took a 1.5" endcap and went t town on it with a dremel, creating a PVC catch ramp that fits right where an E-putty ramp would go. It's another option for builders, though a bit more labor intensive.
#291551 R Series Blasters - Overview!
Posted by Y-Brik on 26 December 2010 - 10:49 AM in Homemades
1. find smarter employee. Ask if there's a plumbing specialist in-storeYea. The guy had no idea what i was talking about. i had to explain what cpvc was and he still didnt know what i was talking about. Then i looked up and down the plumbing and electrical aisles and couldn't find it.
2. CPVC is used mostly in potable (drinking) water as a substitute to copper tubing- as such it's near the copper tubing (In my experience anyway).
While Im here, what springs are you using? I'd recommend [k26] (Plusbow spring) which you can order off McMaster or buy from Split's sales thread.
#290739 R Series Blasters - Overview!
Posted by Y-Brik on 12 December 2010 - 05:42 PM in Homemades
It is, that's why he still needs a spring. Think people, think!It fits very loosely over CPVC. I don't care about theories, I own it, and it works great on 1/2 cpvc. It's OD is 1" with .092" wire diameter.
A k45 theoretically doesn't even fit over 1/2 cpvc let alone pvc.
Isn't your plunger rod 1/2 PVC and not 1/2 CPVC
#285071 Alpha Trooper Air Restrictor Removal
Posted by Y-Brik on 08 September 2010 - 06:45 AM in Modifications
I have heard that some people use cut down [k26] springs in their raiders. Since the alpha trooper is just a reshelled raider that would probly work.
[/quote]
No. [k26] doesn't fit in any of the Recons (Such a shame...). RFSG springs, however, do.
#295096 The Ohio Revolution
Posted by Y-Brik on 26 February 2011 - 01:42 PM in Nerf Wars
Again, this is a possibility, not a guarantee.
#295533 Dartsmithing Tips Archive
Posted by Y-Brik on 07 March 2011 - 09:09 PM in Darts and Barrels
I love this idea, methinks we have a true evolution of the Slug (and homemade dart in general) here.
#300756 New Nerf Guns
Posted by Y-Brik on 29 June 2011 - 03:03 PM in News
Agreed with your thoughts on propulsion, though Nerf has been known to, well, nerf their own designs ever since they came across their lovechild Recon design. I take issue with your view of the Nstrike lineup. The Maverick is consistently Nerf's best selling blaster, at a reasonable price point, cool functionality, and general reliability among stock blasters (It IS a piece of shit from a modders' perspective)- it's earned its 2 repaints a year. The spectre is an overengineered Mav- the less ammo capacity and increased price make it a far cry from the Mav's replacement. As for the LSk, if you really want one, there's one in the works for this year (I won't say too mich for fear of ruining the 'suprise'). And Raiders are one of my favorite ReClones, that and the Recon itself.Why does everyone think that these guns are going to use a familiar plunger or reverse plunger setup? How, exactly, would you propel AND put sufficient spin on a disc by blowing a bunch of compressed air at it from behind? I would be very surprised to see plungers in these blasters, and find it far more likely that it's a new propulsion system.
I'm a little bit bummed that we aren't going to see any new N-Strike guns this year, and that the stupid orange re-releases are of a bunch of blasters that nobody cares about. How many versions of the crappiest Nerf gun (Maverick) do we really need? Is that blaster really that popular, especially after the Spectre came out? Of all three retailer exclusive guns, the one that got a nod from Nerf is the battery-powered Barricade? And the Raider, really? Not the Long Strike?
I'm just hoping this isn't going to make the actually good blasters hard to find.
/end pointless rant about child's toys.
/begin more relevant rant about companies' promises to this community.
@Hasbro- you released this info on the Facebook page ages ago! Why just now let us know? If Hasbro can't keep up its send of supplying new information to the community, I fail to see why we're holding back from speculation threads (such fun little shitstorms those) and reporting the news when it crops up on the net instead of waiting an extra 2 months for a piss-poor release given secondhand!
Well, that's enough ranting. The disc-shooters look cool after all....
#318133 Retaliator/Recon Pump Grip (write up included)
Posted by Y-Brik on 07 July 2012 - 12:33 PM in Modifications
More pix here
#319067 Retaliator/Recon Pump Grip (write up included)
Posted by Y-Brik on 23 July 2012 - 11:44 PM in Modifications
Close, but there's also something to be said for original design. Jams did occur, I ended up selling this and getting a Raider when I realized that's what I was basically building (The AT wasn't out yet, and quite frankly I hate the ergonomics of it)That is awesome. I like how compact it still is, and how it has the light and red dot. It makes the alpha troop look kind of useless at that point.
Perfect? No. Useful and fun? Definitely.
#290030 Nerf Barricade - Clip Conversion - Mod Guide!
Posted by Y-Brik on 04 December 2010 - 03:14 PM in Modifications
#299801 PumpSnap writeup.
Posted by Y-Brik on 13 June 2011 - 04:13 PM in Homemades
I don't know about Rob, but nylon rod would definitely be sturdier--have fun carving a slot through it though. Also, since (common) nylon rod has a 1/8" smaller OD than CPVC, there's very little room for error. CPVC has been used in the past and I haven't heard of it failing on anybody, and it's much easier to makeYou never showed what your plunger rod ended up looking like, is it just a piece of CPVC with a huge slot in it for the priming bar? Wouldn't Nylon rob but much more sturdy?
tl;dr- nylon is stronger but it's not worth it. He likely used CPVC.
#286171 Nerf Modification Spring Sizes
Posted by Y-Brik on 27 September 2010 - 08:38 PM in Modifications
#297318 A new style Pump-action SNAP
Posted by Y-Brik on 19 April 2011 - 04:22 PM in Homemades
I got mine at Do It Best; they have online ordering with free shipping to your nearest store- go here. It's $4-ish for 10' with no shipping hassles or driving to numerous Ace's to search for the stuff.Beautiful. May I ask where you happened to find 1 and 1/2" thinwall pvc? If I can get my hands on some of that, I will have to make one of these.
#321058 "Freehand" Molded Silicone Domes
Posted by Y-Brik on 26 August 2012 - 02:48 PM in Darts and Barrels
#286535 4 Chan, Johnny
Posted by Y-Brik on 03 October 2010 - 10:34 PM in Nerf Wars
+Having 2 Stampedes on the field (And do well too! I was glad to be on their team).
+Ring-around-the-treesie (Ended with one of them Stampedes)
+Eliminator with Stampede shield- the greatest in the sub-optimal category
+ Meeting up with my buddies from Cataclysm
+Here's the deal- Wendys was great!
+Used the hell outta my +Bow
+Chronographs are not only neat- they're 133.7!!
+Got 2 legit wyes and clear PVC for less than I expected to pay
+Everyone being cool (Not just because of the weather) about the relocation
+BIGGEST WAR in the region! Woot!
-Relocation.
-Gun breakage. Thank God I brought my electric screwdriver
-Cold and windy! Grab the mobstacles!!
-Lost 80% of my darts
-In-game dart failure. Liquid nails does NOT work on stefans, you hear me Sluggy?
-Had to leave early
#288365 New Nerf Gun
Posted by Y-Brik on 13 November 2010 - 05:30 PM in News
Oh yeah, and cool blaster for a flywheel gun.
EDIT: I can't read- the email says we plan on posting this on fb later today. nevermind.
#300211 The SNAP/Revolution
Posted by Y-Brik on 20 June 2011 - 10:19 AM in Homemades
All i can say is this is amazing i have been watching nerfhaven for a while and i love this i am going to make it only thing wrong with the write-up is for someone who has never built a snap (such as my self)there is not materials list and you never say what size pvc the plunger TUBE is since im going to make this could you pm me or just reply to this with a materials list i found your other snap write ups on nerfhaven but i dont know if the sizes are still the same. Thanks alot and your awesome!
!.,..'
I caught most of your punctuation; it seems to have escaped your post. As with any SNAP the plunger tube is 1.25" PVC. I would suggest you build a basic SNAP before taking this one on.
- NerfHaven
- → Y-Brik's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·