- NerfHaven
- → Y-Brik's Content
Y-Brik's Content
There have been 145 items by Y-Brik (Search limited from 07-December 96)
#294750 Pistol Splat Spring Replacement
Posted by Y-Brik on 20 February 2011 - 09:02 AM in Modifications
#294600 Barrel Material For Stock Micros
Posted by Y-Brik on 16 February 2011 - 10:37 PM in Modifications
#294581 Barrel Material For Stock Micros
Posted by Y-Brik on 16 February 2011 - 06:14 PM in Modifications
CPVC it. If you don't know how, check out our fantastic mods directory. End of story.Would it be best to leave the stock barrel in a Nite-Finder or replace it with some other material?
I have CPVC and PVC to replace it with, as well as a drill to bore out pipes if need be.
#293132 Community Snap Thread
Posted by Y-Brik on 19 January 2011 - 10:06 PM in Homemades
EDIT: I misspoke, I meant catchRAMP. My Snap uses a PVC catchramp attached to a metal washer for the catchface. Basically take the Superlative and replace epoxy putty with PVC.
#292475 Total X-stream Air Sonic Bazooka
Posted by Y-Brik on 09 January 2011 - 03:09 PM in General Nerf
Self-sufficiency is key here; a google search, a NH search (seriously, it works!), or the mod directory are all preferable to posting- use the resources you have!
#292319 Nerf Dart Tag Quick 16
Posted by Y-Brik on 06 January 2011 - 12:32 AM in General Nerf
I absolutely love this new clip system- high ROF, we get taggers back, and you dont need to yank a clunky mag out of your blaster to reload (or, worse, haul a million of said clunky mags to keep reload times as low as possible). I'm 100% sure BOTH blasters are REVERSE PLUNGERS (big suprise), but I dont care. The Q16 is going to be the ultimate contender in indoor wars to date.
#291825 No More Problem. Close Thread Asap.
Posted by Y-Brik on 29 December 2010 - 10:13 PM in General Nerf
how good are you at soldering? You didn't cook anything did you?
#291823 Has Anybody Tried To Shorten The Stroke Of A Stampede?
Posted by Y-Brik on 29 December 2010 - 09:59 PM in Modifications
#291551 R Series Blasters - Overview!
Posted by Y-Brik on 26 December 2010 - 10:49 AM in Homemades
1. find smarter employee. Ask if there's a plumbing specialist in-storeYea. The guy had no idea what i was talking about. i had to explain what cpvc was and he still didnt know what i was talking about. Then i looked up and down the plumbing and electrical aisles and couldn't find it.
2. CPVC is used mostly in potable (drinking) water as a substitute to copper tubing- as such it's near the copper tubing (In my experience anyway).
While Im here, what springs are you using? I'd recommend [k26] (Plusbow spring) which you can order off McMaster or buy from Split's sales thread.
#291523 Ls Bolt,stuck
Posted by Y-Brik on 25 December 2010 - 10:57 PM in Modifications
#291476 Ls Bolt,stuck
Posted by Y-Brik on 25 December 2010 - 02:08 AM in Modifications
#291272 Hopper Clip For Stock Tagger Darts
Posted by Y-Brik on 21 December 2010 - 01:19 AM in Darts and Barrels
EDIT-oops, I thought we were talking about the other exotic part. Yeah, haven't seen any purple PVC at Loews....
#290739 R Series Blasters - Overview!
Posted by Y-Brik on 12 December 2010 - 05:42 PM in Homemades
It is, that's why he still needs a spring. Think people, think!It fits very loosely over CPVC. I don't care about theories, I own it, and it works great on 1/2 cpvc. It's OD is 1" with .092" wire diameter.
A k45 theoretically doesn't even fit over 1/2 cpvc let alone pvc.
Isn't your plunger rod 1/2 PVC and not 1/2 CPVC
#290737 Nerf Style Grenade Launcher?
Posted by Y-Brik on 12 December 2010 - 05:39 PM in General Nerf
Dude, there's a pretty descriptive youtube link that shows it in the show. Oh, and to all of you who have survived this long without having heard of iCarly, I envy you.You saw that on Icarly?so i was watching icarly and in the titles theres a clip of video with sam holding a a orange mgl it looks like thisgrenade pic can anyone identify it? I've looked in the blaster identification pinned topic and can't find it.
#290030 Nerf Barricade - Clip Conversion - Mod Guide!
Posted by Y-Brik on 04 December 2010 - 03:14 PM in Modifications
#289853 Forget This
Posted by Y-Brik on 03 December 2010 - 12:33 AM in Modifications
Also, nobody here really uses the emoticons, so don't amplify the newbishness.
Again, welcome to the Haven, don't get yourself kicked out again.
#289594 Nano Belt Blaster
Posted by Y-Brik on 01 December 2010 - 08:11 AM in Modifications
Is there any reason you used thinwall PETG (Airgun fit) instead of medium/thickwall (Springer fit)?
#289556 Pumpsnap A La Rork
Posted by Y-Brik on 30 November 2010 - 10:09 PM in Homemades
#289056 Gyrostabilization Module
Posted by Y-Brik on 27 November 2010 - 08:57 AM in Modifications
EDIT: @Nerfer91's sig- It's the SEARS Tower dammit, the SEARS tower!
#288893 Making An Aftermarket Mod Match The Stock Color
Posted by Y-Brik on 25 November 2010 - 01:52 PM in Modifications
#288834 Nerf In The News
Posted by Y-Brik on 24 November 2010 - 07:44 PM in General Nerf
Linky
Kinda bugs me that the intelligent nerfers are lumped in with the retards. Also, slingshots? Those are SO 2008!
#288639 The Eccentric, Airtech And Supermaxx Series Overhaul
Posted by Y-Brik on 20 November 2010 - 12:57 AM in Modifications
I doubt it seeing as he then sends the air thru a 1/8"-ish hole into the RSCB.Very original idea to turn the tank around and use a trigger like that. Did you widen the dump valve before?
@Boot- very nice, I like seeing the creativity (if not as much cosmetics- I can live with that) coming across the pond! Keep it up!
#288422 Check-skirt
Posted by Y-Brik on 15 November 2010 - 12:05 AM in Homemades
#288365 New Nerf Gun
Posted by Y-Brik on 13 November 2010 - 05:30 PM in News
Oh yeah, and cool blaster for a flywheel gun.
EDIT: I can't read- the email says we plan on posting this on fb later today. nevermind.
#288359 Homemades Picture Thread
Posted by Y-Brik on 13 November 2010 - 03:48 PM in Homemades
Little discovery- 45 degree PVC bell curves in the conduit section work great on choppers- it's made to funnel wires around a curve and works just as well with darts. I lopped about an inch off the male end (insert jokes here) of mine to keep a low profile, and used a little etape on clip and bell curve to keep everything snug.
Now, to an actual homemade- I got an ObsoleteBow awhile ago and have been making small adjustments to it.
The PVC foregrip is based around a 3/4"x1/2" PVC tee. Also, if you're building one of these (Why? There are RainBows now!), use 5/8" long screws on all nylon rod connections, and use lockwashers.
There's a new (to my knowledge) spring spacer- my long-winded description is on my flickr post. Spring now hits full compression, and the thing shoots hard.
#288355 Illinois Foam Fest 4
Posted by Y-Brik on 13 November 2010 - 02:47 PM in Nerf Wars
Saturdays are great assuming I can get out of work. Sundays I don't usually work, but it's hard ditching church for a nerf war (Yeah, my priorities are all messed up, I know).My apologies for the double post, but this question needs to be asked. What date works better for you guys, Saturday November 27th, or Sunday November 28th?
#288351 Modification and Paintjob Pictures
Posted by Y-Brik on 13 November 2010 - 02:19 PM in Modifications
@Zack the Mack- Now I suddenly want a barrel break...
My new indoor primary:
BBB spring addition, brass stub in barrel, locks and other junk removed, krylon fusion PJ with rather sloppily applied detailing. Paired with an AT drum, prpbably the only reason to get an AT imo.
#288075 Community Snap Thread
Posted by Y-Brik on 07 November 2010 - 09:53 AM in Homemades
A SNAP does not use a flat, vertical catch plate, but rather a pin contacting the plunger (rod or head), mounted on a clothespin trigger.
-The exclusion of a flat vertical cath plate rules out both Rainbow and Plusbow.
-The statement 'A pin contacting the plunger' is accurate with the CPT2 because, well, it does. It just adds a cradle to improve the catch surface area.
- NerfHaven
- → Y-Brik's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·