Jump to content


Y-Brik's Content

There have been 145 items by Y-Brik (Search limited from 29-July 92)


By content type

See this member's


Sort by                Order  

#294750 Pistol Splat Spring Replacement

Posted by Y-Brik on 20 February 2011 - 09:02 AM in Modifications

A whole 0' so far- he said in the post that his tests were dry-fired, and do you see a barrel anywhere?



#294600 Barrel Material For Stock Micros

Posted by Y-Brik on 16 February 2011 - 10:37 PM in Modifications

Don't bother, if you're shooting stock ammo just chamfer the edge. I use the serrated edge on my pocket knife to give a smooth curve, or a Dremel, or an X-acto. You want a tight-ish fit for springers, remember.



#294581 Barrel Material For Stock Micros

Posted by Y-Brik on 16 February 2011 - 06:14 PM in Modifications

Would it be best to leave the stock barrel in a Nite-Finder or replace it with some other material?
I have CPVC and PVC to replace it with, as well as a drill to bore out pipes if need be.

CPVC it. If you don't know how, check out our fantastic mods directory. End of story.



#293863 Rpmbnb! Updated With More Goodies!

Posted by Y-Brik on 03 February 2011 - 10:57 PM in Homemades

Excellent work, I may just have to ask you for those Inventor files (The handle, trigger, catch, and rear endcap in particular)



#293154 Community Snap Thread

Posted by Y-Brik on 20 January 2011 - 05:44 PM in Homemades

The clothespin is deceptive- a well made Snap will not misfire. As far as I can tell, both catches are as strong as they would need to be. So, no real difference.



#293132 Community Snap Thread

Posted by Y-Brik on 19 January 2011 - 10:06 PM in Homemades

Use a 1.25" endcap, lop off the connecting part (you only need the back), drill a hole in the middle to accommodate the plunger rod/endcap, and sand the hell out of it until you have a nice smooth catchface. It's a superlative with the durability of a preeminent. I feel like I said this before....

EDIT: I misspoke, I meant catchRAMP. My Snap uses a PVC catchramp attached to a metal washer for the catchface. Basically take the Superlative and replace epoxy putty with PVC.



#293083 Community Snap Thread

Posted by Y-Brik on 18 January 2011 - 08:11 PM in Homemades

Just make sure you mount the bushing well- either with screws or PVC cement. That said, SNAPS are built like tanks and either way works (Mine is stopped by the rear- with a rubber washer between endcap and priming handle)



#292475 Total X-stream Air Sonic Bazooka

Posted by Y-Brik on 09 January 2011 - 03:09 PM in General Nerf

The Sonic Bazooka is a rip-off of the 4b, therefore the majority of common mods done to the Big Blast.
Self-sufficiency is key here; a google search, a NH search (seriously, it works!), or the mod directory are all preferable to posting- use the resources you have!



#292319 Nerf Dart Tag Quick 16

Posted by Y-Brik on 06 January 2011 - 12:32 AM in General Nerf

My Raider just dropped a few notches on the totem pole...
I absolutely love this new clip system- high ROF, we get taggers back, and you dont need to yank a clunky mag out of your blaster to reload (or, worse, haul a million of said clunky mags to keep reload times as low as possible). I'm 100% sure BOTH blasters are REVERSE PLUNGERS (big suprise), but I dont care. The Q16 is going to be the ultimate contender in indoor wars to date.



#292096 Community Snap Thread

Posted by Y-Brik on 02 January 2011 - 06:57 PM in Homemades

My first snap relied on hotglue. That didnt even last a whole war. My next attempt involved zipties, which I recommended for strength, and later I swapped them out for a screw and washer to hold the bracket on with.



#292094 Illinois Foam Fest Six

Posted by Y-Brik on 02 January 2011 - 06:48 PM in Nerf Wars

I'm a likely. Knex- the ILFF I was at averaged at age 15, I think the youngest was like 10 and the oldest was college-age, with a good distribution in the middle.



#291825 No More Problem. Close Thread Asap.

Posted by Y-Brik on 29 December 2010 - 10:13 PM in General Nerf

Pictures?
how good are you at soldering? You didn't cook anything did you?



#291823 Has Anybody Tried To Shorten The Stroke Of A Stampede?

Posted by Y-Brik on 29 December 2010 - 09:59 PM in Modifications

Seeing as voltage mods up the ROF to the max allowed by CS-style blasters, I see little point in this, especially since it decreases range in the process. I'd stick with the "spring, seal, and voltage mods".



#291551 R Series Blasters - Overview!

Posted by Y-Brik on 26 December 2010 - 10:49 AM in Homemades

Yea. The guy had no idea what i was talking about. i had to explain what cpvc was and he still didnt know what i was talking about. Then i looked up and down the plumbing and electrical aisles and couldn't find it.

1. find smarter employee. Ask if there's a plumbing specialist in-store
2. CPVC is used mostly in potable (drinking) water as a substitute to copper tubing- as such it's near the copper tubing (In my experience anyway).

While Im here, what springs are you using? I'd recommend [k26] (Plusbow spring) which you can order off McMaster or buy from Split's sales thread.



#291527 R Series Blasters - Overview!

Posted by Y-Brik on 25 December 2010 - 11:44 PM in Homemades

Really? It's pretty common in hardware stores- did you ask an employee to help when you were looking?



#291523 Ls Bolt,stuck

Posted by Y-Brik on 25 December 2010 - 10:57 PM in Modifications

See, this is the problem I kept running into. I added a 1 1/4" washer to the front of the plunger head (Swapped out the screw too). Cuts down on plunger volume by a hair (moot with a stock breech), but is a great quick fix!



#291476 Ls Bolt,stuck

Posted by Y-Brik on 25 December 2010 - 02:08 AM in Modifications

Pictures are nice, as are more specific descriptions of what's wrong (and like Phree said- what state is the blaster in). Are you saying the LS won't catch when you pull the priming handle all the way back?



#291471 Merry Christmas!

Posted by Y-Brik on 25 December 2010 - 01:07 AM in Off Topic

Jeez, can nobody spell...
MERRY CHRISTMAS!



#291272 Hopper Clip For Stock Tagger Darts

Posted by Y-Brik on 21 December 2010 - 01:19 AM in Darts and Barrels

Found 'em at Loews next to the grey conduit PVC (go figure) in the electrical aisle for about $0.80 each. Kinda expensive as fittings go, but useful. They make great choppers too.

EDIT-oops, I thought we were talking about the other exotic part. Yeah, haven't seen any purple PVC at Loews....



#290739 R Series Blasters - Overview!

Posted by Y-Brik on 12 December 2010 - 05:42 PM in Homemades


A k45 theoretically doesn't even fit over 1/2 cpvc let alone pvc.

It fits very loosely over CPVC. I don't care about theories, I own it, and it works great on 1/2 cpvc. It's OD is 1" with .092" wire diameter.


Isn't your plunger rod 1/2 PVC and not 1/2 CPVC

It is, that's why he still needs a spring. Think people, think!



#290737 Nerf Style Grenade Launcher?

Posted by Y-Brik on 12 December 2010 - 05:39 PM in General Nerf

so i was watching icarly and in the titles theres a clip of video with sam holding a a orange mgl it looks like thisgrenade pic can anyone identify it? I've looked in the blaster identification pinned topic and can't find it.

You saw that on Icarly?
:huh:

Dude, there's a pretty descriptive youtube link that shows it in the show. Oh, and to all of you who have survived this long without having heard of iCarly, I envy you.



#290030 Nerf Barricade - Clip Conversion - Mod Guide!

Posted by Y-Brik on 04 December 2010 - 03:14 PM in Modifications

Ok, you just made flywheel guns cool to me. Excellent conversion, this blaster is gorgeous with a mag in. Is accuracy Ok wit flywheels lobbing streamlines?



#289853 Forget This

Posted by Y-Brik on 03 December 2010 - 12:33 AM in Modifications

Welcome to the Haven, remember that self sufficiency is KING here- you will get to know the search function, the various directories, and if all else fails, the IRC (Search it- its good practice!) very well. Posting new threads for questions that can be answered in under 5 min of searching usually result in snide answers (like Philly's), and possibly disciplinary action- don't get yourself axed!
Also, nobody here really uses the emoticons, so don't amplify the newbishness.
Again, welcome to the Haven, don't get yourself kicked out again.



#289594 Nano Belt Blaster

Posted by Y-Brik on 01 December 2010 - 08:11 AM in Modifications

Excellent work fixing up a blaster with little seen potential!
Is there any reason you used thinwall PETG (Airgun fit) instead of medium/thickwall (Springer fit)?



#289556 Pumpsnap A La Rork

Posted by Y-Brik on 30 November 2010 - 10:09 PM in Homemades

I forgot to mention my Snap also uses a wood dowel plunger rod (It's 5/8" Oak from Home Depot- there was 2 types of wood, I opted for the heavier one). Works great but be good to it- use a long-ish wood screw (1"+ into the wood), as well as a deep fit on the priming handle- I bored out the tee so the dowel slid in further before adding my screw. Gotta say, I like this better than cpvc for the plunger rod- no fighting with that endcap on the plunger head.



#289451 Pumpsnap A La Rork

Posted by Y-Brik on 30 November 2010 - 02:54 AM in Homemades

Get a 1" PVC endcap, lop off the part that connects to the pipe (so you have a flat-ish surface), and use that. It's way simple yo, and more durable-Yay PVC!



#289220 Illinois Foam Fest 4

Posted by Y-Brik on 28 November 2010 - 01:51 AM in Nerf Wars

Fantastic war. Will add my +/- when I get some sleep after working 9.5 FUCKING HOURS! (need sleep....)



#289056 Gyrostabilization Module

Posted by Y-Brik on 27 November 2010 - 08:57 AM in Modifications

Have you ever held a gyroscope? They have this funny property of not wanting to be moved, so they cut down on the movement the gun goes through, theoretically making it more stable and accurate. Megaprops for building this Mega, but I get the feeling this is a high-work low-payoff sorta build.
EDIT: @Nerfer91's sig- It's the SEARS Tower dammit, the SEARS tower!



#288893 Making An Aftermarket Mod Match The Stock Color

Posted by Y-Brik on 25 November 2010 - 01:52 PM in Modifications

From what I've seen, its far easier to just repaint the entire blaster in a similar color (eliminates color matching). Oh, and if you're spraypainting, get some krylon fusion.



#288834 Nerf In The News

Posted by Y-Brik on 24 November 2010 - 07:44 PM in General Nerf

This was on the 10:00 news the other night.
Linky
Kinda bugs me that the intelligent nerfers are lumped in with the retards. Also, slingshots? Those are SO 2008!



#288650 R Series Blasters - Overview!

Posted by Y-Brik on 20 November 2010 - 11:36 AM in Homemades

I hate you for your beautifully-colored PVC.
Great design SG, I like how you've effectively removed the catch from the plunger tube. Now to figure out how to adapt this to American PVC specs...



#288639 The Eccentric, Airtech And Supermaxx Series Overhaul

Posted by Y-Brik on 20 November 2010 - 12:57 AM in Modifications

Very original idea to turn the tank around and use a trigger like that. Did you widen the dump valve before?

I doubt it seeing as he then sends the air thru a 1/8"-ish hole into the RSCB.
@Boot- very nice, I like seeing the creativity (if not as much cosmetics- I can live with that) coming across the pond! Keep it up!



#288638 Illinois Foam Fest 4

Posted by Y-Brik on 20 November 2010 - 12:47 AM in Nerf Wars

It looks like I may be able to go to this one! Work scheduale looks clear anyway!
EDIT: Looked clear- I start work @ 3. Can probably make it till 1 ish



#288422 Check-skirt

Posted by Y-Brik on 15 November 2010 - 12:05 AM in Homemades

Interesting concept, though in need of minimization (I'm sure you're already working on it). Honestly, I haven't had a ton of problems with this on my +bow (choppered)- I have a CPVC dart guide to avoid vac-jamming, and if I do feel a vacuum in the PT I just open the ball valve a hair to equalize pressure.



#288365 New Nerf Gun

Posted by Y-Brik on 13 November 2010 - 05:30 PM in News

Wasn't NH told that we would be the first place to debut nerf news, even before fb? what happened there? We're living up to our end of the deal as far as Im seeing, am I wrong?
Oh yeah, and cool blaster for a flywheel gun.
EDIT: I can't read- the email says we plan on posting this on fb later today. nevermind.



#288359 Homemades Picture Thread

Posted by Y-Brik on 13 November 2010 - 03:48 PM in Homemades

Posted Image
Little discovery- 45 degree PVC bell curves in the conduit section work great on choppers- it's made to funnel wires around a curve and works just as well with darts. I lopped about an inch off the male end (insert jokes here) of mine to keep a low profile, and used a little etape on clip and bell curve to keep everything snug.
Now, to an actual homemade- I got an ObsoleteBow awhile ago and have been making small adjustments to it.

Posted Image
The PVC foregrip is based around a 3/4"x1/2" PVC tee. Also, if you're building one of these (Why? There are RainBows now!), use 5/8" long screws on all nylon rod connections, and use lockwashers.
Posted Image
There's a new (to my knowledge) spring spacer- my long-winded description is on my flickr post. Spring now hits full compression, and the thing shoots hard.



#288355 Illinois Foam Fest 4

Posted by Y-Brik on 13 November 2010 - 02:47 PM in Nerf Wars

My apologies for the double post, but this question needs to be asked. What date works better for you guys, Saturday November 27th, or Sunday November 28th?

Saturdays are great assuming I can get out of work. Sundays I don't usually work, but it's hard ditching church for a nerf war (Yeah, my priorities are all messed up, I know).



#288354 Community Snap Thread

Posted by Y-Brik on 13 November 2010 - 02:44 PM in Homemades

EDIT- totally put this in the wrong place; sorry



#288351 Modification and Paintjob Pictures

Posted by Y-Brik on 13 November 2010 - 02:19 PM in Modifications

@Valor- why would you paint a creamsicle?
@Zack the Mack- Now I suddenly want a barrel break...
My new indoor primary:
Posted Image
BBB spring addition, brass stub in barrel, locks and other junk removed, krylon fusion PJ with rather sloppily applied detailing. Paired with an AT drum, prpbably the only reason to get an AT imo.
Posted Image



#288075 Community Snap Thread

Posted by Y-Brik on 07 November 2010 - 09:53 AM in Homemades

Here's the simplest definition I can think of:
A SNAP does not use a flat, vertical catch plate, but rather a pin contacting the plunger (rod or head), mounted on a clothespin trigger.
-The exclusion of a flat vertical cath plate rules out both Rainbow and Plusbow.
-The statement 'A pin contacting the plunger' is accurate with the CPT2 because, well, it does. It just adds a cradle to improve the catch surface area.