Jump to content


Hi Yah's Content

There have been 251 items by Hi Yah (Search limited from 22-October 93)


By content type

See this member's


Sort by                Order  

#257442 How To Make Hollow Stefans (tutorial)

Posted by Hi Yah on 28 November 2009 - 10:55 AM in General Nerf

Do you have to heat up the nail for every dart? And do you think it's worth the extra time to make them?



#257251 Inline Clip

Posted by Hi Yah on 25 November 2009 - 04:37 PM in Modifications

This seems to be a good time to ask, because I've been curious; is there any sort of PETG, or clear piping that fits snugly in a CPVC coupler, but is thin enough to allow the darts to fall through?


I've heard of some people getting 5/8 PETG from some pet stores.



#256920 At3k Internals Questions

Posted by Hi Yah on 21 November 2009 - 08:32 AM in Modifications

Use 3/16 barbed connectors. I know Home Depot has them, but I don't know if Ace has them.



#256889 At3k Internals Questions

Posted by Hi Yah on 20 November 2009 - 09:46 PM in Modifications

You could just cut the tubing as close to the goo gauge as possible, on both sides. Then you can attach tubing with barbed connectors.



#256843 Nitefinder Rifle Question

Posted by Hi Yah on 20 November 2009 - 07:37 AM in Modifications

Use 1" PETG from petco. It will fit the stock plunger tube pretty good. I believe that's what kbarker used.



#256639 Handyman #9713 Spring = Which Ace Spring?

Posted by Hi Yah on 17 November 2009 - 09:17 PM in Modifications

Hey guys, I am looking for stronger springs for my Raider and Recon. Any suggestions? Thank You.


You could replace the spring with one from rfsg.



#256634 "silencing" My Nf

Posted by Hi Yah on 17 November 2009 - 08:42 PM in Modifications

How is the fbr method expensive? It cost about $3 for a 20' roll, and you only need about 1' to silence it. That's about 15 cents to silence your nf.



#256412 Firefinder

Posted by Hi Yah on 15 November 2009 - 10:44 PM in Modifications

So whats the point of this mod? You only dampened the range of a NF.


This could be useful to someone if they need a pistol and when modding their new NF, the plunger tube shattered. They could then use this as a backup idea.


You could just go to Petco and get some 1" thinwall PETG for the plunger tube.



#256021 Just Toys 1992 Crossbow.

Posted by Hi Yah on 11 November 2009 - 09:00 PM in Modifications

That's pretty cool. Could we get an internal pic?



#255797 Recon Cs-6 And Ertl Rapid Fire Shot Gun Mod

Posted by Hi Yah on 09 November 2009 - 07:16 PM in Modifications

So basically, it's a longshot on steroids, right? Nice mod, all it needs now is a paintjob.



#255627 What Type Of Tubing Will Fit 13mm Fbr? *resolved!*

Posted by Hi Yah on 07 November 2009 - 07:13 PM in General Nerf

Just take your foam to different stores and check the fit in various barrel materials. It's as easy as that.



#255421 Airtech 4000 Overhaul

Posted by Hi Yah on 05 November 2009 - 06:55 PM in Modifications

Great work as usual. I definitely think the at4k is an underestimated gun. Nice mod.



#255397 Rscb Bbb

Posted by Hi Yah on 05 November 2009 - 04:00 PM in Modifications

Nice job. I personally think that bbb's work wonderfully with RSCB's.



#255139 Red Strike Series?

Posted by Hi Yah on 01 November 2009 - 09:17 PM in General Nerf

I can definitely see kids buying another gun just because it's a differnet color.
And Megaloden, the color 'gray' can only be spelled 'gray.'



#254725 Nerf N-strike Longstrike Cs-6 - Preview!

Posted by Hi Yah on 27 October 2009 - 06:54 PM in General Nerf

It kinda reminds me of the lanard hand cannon. It looks like it might have some potential.



#254525 Stormtrooper Blastech E-11 Raider With Brass Breech

Posted by Hi Yah on 25 October 2009 - 02:21 PM in Modifications

Holy shit, that's the coolest raider ever! Nice job.



#254473 Rscb Clip Stabilizer?

Posted by Hi Yah on 24 October 2009 - 07:22 PM in Modifications

On my RSCB'd bbb I just twisted the clip so it's pressed up against the side of the gun.



#254248 I Need Help With A Female 1/2" Npt Coupler

Posted by Hi Yah on 21 October 2009 - 06:54 PM in Modifications

Why don't you just remove the coupler and replace it with a slip CPVC coupler?



#254183 Breech Lock N' Load

Posted by Hi Yah on 21 October 2009 - 06:39 AM in Modifications

I think if you made the 4 inches you might get better results. Nice job.



#253993 Replacement Xbow Trigger And Catch Springs?

Posted by Hi Yah on 19 October 2009 - 07:44 PM in Modifications

Home Depot sells a pack of small industrial springs that come in all shapes and sizes. These have work great for me in a variety of guns, so I don't see why it won't work with a crossbow.



#253867 Questions About Making A Rscb Clip

Posted by Hi Yah on 18 October 2009 - 06:58 PM in Modifications

Don't use brass. Use 1/2 inch copper to make the clip, this will fit the darts loosely and fit in the t-coupler. Use
1/2 CPVC for the barrel. CPVC will give you a tight dart/barrel fit, which you want when using a RSCB.



#253725 Airtech 3000 Overhaul

Posted by Hi Yah on 17 October 2009 - 07:30 AM in Modifications

Couldn't you cut down the pump so all the tubing is internal?



#252785 Bbb Spring

Posted by Hi Yah on 06 October 2009 - 07:52 PM in Modifications

I would recommend using a recon spring, with 1.5 of a nf replacement spring, and a PVC coupler cut to 0.75 inches.



#252684 Stefan Question?

Posted by Hi Yah on 05 October 2009 - 05:24 PM in Modifications

I would recommend using the 3/8 felt discs and using #bb fishing weights, instead of washers. The 3/8 felt disc won't completely cover the #8 washer.



#252561 Big Salvo With 3-shot Barrels

Posted by Hi Yah on 04 October 2009 - 07:18 AM in Modifications

I really like how you have the three shotgun barrels and one single shot. It seems very effective. Nice mod.



#252291 Silencing Your Longshot.

Posted by Hi Yah on 01 October 2009 - 06:57 AM in Modifications

Pretty much the only way to silence a gun is to fill it with foam and add padding to the plunger. You could add a weaker spring addition to make it a bit quiter.



#251811 Need Some Help With Nf Mod Troubleshooting

Posted by Hi Yah on 27 September 2009 - 07:55 AM in Modifications

Try getting some CPVC, it's about the same price as PETG but has a tighter fit.



#251719 Need Some Help With Nf Mod Troubleshooting

Posted by Hi Yah on 26 September 2009 - 01:13 PM in Modifications

What lube did you use? I too believe your problem is the dart fit.



#251588 Dt3 Pistol With New Internals

Posted by Hi Yah on 25 September 2009 - 06:39 AM in Modifications

This kind of reminds me of bobafan's dt3 mod, except with a new plunger rod. What ranges are you getting? Nice work.



#251409 Nitefinder Problem....fixed

Posted by Hi Yah on 23 September 2009 - 03:32 PM in Modifications

Try using a heat gun.



#251051 Maverick Mod Help

Posted by Hi Yah on 20 September 2009 - 07:29 PM in Modifications

I'm sorry I don't get what you mean when you say rebarrel the cylinder. Also the barrel has been rotating a little bit funny, how would this effect the firing?

If the rotation is messed up, then the turret won't lign up properly with the plunger tube. This will create bad airflow and the ranges will suck.



#250966 Rscb Help Anyone?

Posted by Hi Yah on 20 September 2009 - 08:41 AM in Darts and Barrels

Try sanding the barrel where it meets the t coupler, this will make it run a bit smoother. Also I reccommend cutting the barrel 2 inches shorter than the normal length singled barrel, this will be a better barrel length for the last shots. I hope this helps.



#250897 Bbb Value Questions

Posted by Hi Yah on 19 September 2009 - 07:30 PM in Modifications

Definitely get the bbb. I'm a huge fan of bbb's and for $20 they make pretty good primaries. Just coupler it and slap on a RSCB and you'll get range and rof.



#250786 Problem With The Raider

Posted by Hi Yah on 18 September 2009 - 06:04 PM in Modifications

We need more information to figure out what the problem is. So, be more detailed and post some pictures.



#250683 Maverick Mod Help

Posted by Hi Yah on 17 September 2009 - 06:30 AM in Modifications

You should try putting one of the air restrictor springs in the front of the turret and then put on the metal rod. That will increase the seal. Also, toss a few pennies behind the spring that'll give it a bit more power.



#250616 Ertl Pump Action Shotgun Modification

Posted by Hi Yah on 16 September 2009 - 04:54 PM in Modifications

This reminds me of the cross snap. Nice job coop.



#250583 Happy Birthday Sluggy!

Posted by Hi Yah on 16 September 2009 - 06:49 AM in Off Topic

Happy birthday Sputnik and Slug.



#249824 Lbb-mav

Posted by Hi Yah on 07 September 2009 - 11:18 AM in Modifications

I believe ice did the same thing a while back but used a bbbb instead. Nice work.



#249339 Help With My Rscb

Posted by Hi Yah on 01 September 2009 - 03:06 PM in Modifications

How do your darts fit in petg? RSCB clips tend to work better with a tigher dart/barrel fit.



#249235 Nf Plunger Problems

Posted by Hi Yah on 31 August 2009 - 07:29 PM in Modifications

Unless you did a barrel replacement or coupler addition you need to have the front of the nightfinder attached to the gun.