- → NinjaBob's Content
There have been 64 items by NinjaBob (Search limited from 16-February 93)
Strangly enough there called pellets, they are shot from pellet guns.
I don't remember exactly what they were called, but they were pellets of some sort. I think they were BB pellets. They were shaped like this:
They worked more efficent than the other stuff I tried.
Damnit, it didn't come out right when I posted it. I'm going to buy some more soon, so I'll get a pic.
How does that work for thinner tubing that goes inside the hole not over it?
neg. epoxy, plumbers goop, glue etc. is all unsuitable for this job. hose clamp, go buy a hose clamp for vinyl tubing, you'll find it right next to the vinyl tubing. it's a little metal band that clicks tight with a screwdriver.
Oh, see that confused me.
No.. Just no. I really don't think your right. That simply makes no sense.
For most people if they push they're darts all the way down a CPVC barrel provides to much friction
Actually, you jsut have to find out which size cpvc is the best. For spring pistols, dont go over 6 inches. Depending on the power of the gun, and the type(air,spring...) you change the barrel length.
you probably won't gain 10 feet from a 2 inch dart pressed down a 4 inch CPVC barrel. Chances are you'll lose 2 or 3 than with a dart blown back in brass or if the dart was just in the end of the CPVC.
I had a 4 inch barrel on my tt, I gained 10 feet by rammming, and greatly reduced the velocity and accuracy of the dart.
Once, my brother just rammed a 7 inch cpvc barrel into his tt, with air restrictor in, no mods, shot, and he got the same ranges of a brass mod. Strange, how it was completely unmodded. Now imagine a 7 inch cpvc breech loader in a modded TTG...
Well, its kinda strange, Ive got many places to egt my fbr from, and when Im near one of the places, I jsut stop in, and pick up some parts if im in need. Each store carries the same brand fbr, but each stores 1/2 fbr is all slightly different, for example:
My home depot has very fbr.
My localhardware store has very thick fbr.
And then theres another hardware store that carries medium...
So really, It depends on the darts you use. Ivenever tried the thick kind, only the medium and small. Small gave best results btw.
Your crazy. Six pumps would never fill a piece of PVC that size. At least not with a stock pump. Are you sure you have air going into that tank? If you didn't punch a whole in that rubber piece in the goo meter then you wouldn't be getting air into the PVC.Why cant I get better results. Why does it always have to be worse. It could be better. this morning I tested how many pumps it took to fill up the tank and it took about 6.
Well, your either going to get the same results and need to pump more, or get worse results.
Thanks for taking a look guys n' gals