Strangly enough there called pellets, they are shot from pellet guns.
I don't remember exactly what they were called, but they were pellets of some sort. I think they were BB pellets. They were shaped like this:
They worked more efficent than the other stuff I tried.
Damnit, it didn't come out right when I posted it. I'm going to buy some more soon, so I'll get a pic.
- → NinjaBob's Content
There have been 64 items by NinjaBob (Search limited from 20-February 93)
2. We can't afford paintball because we're to lazy for real jobs.
3. Nerf Haven, more flaming than at a gay pride parade.
4. Nerf Haven: The devil made me do it.
5. Nerf Haven: teaching adolescents how to curse.
6. Nerf Haven: Not related to Columbine.
7. Nerf Haven, bringing people of all types together ... geeks, and nerds alike.
8. Nerf Haven: Just because there grown men playing with toys doesn't mean there crazy ...... but there sure as hell not sane.
9. Nerf, coming out of the basements and moving into your face ... after adjusting to the light.
10. Nerf Haven: We're not crazy, we just twitch a lot.
Your crazy. Six pumps would never fill a piece of PVC that size. At least not with a stock pump. Are you sure you have air going into that tank? If you didn't punch a whole in that rubber piece in the goo meter then you wouldn't be getting air into the PVC.Why cant I get better results. Why does it always have to be worse. It could be better. this morning I tested how many pumps it took to fill up the tank and it took about 6.
Well, your either going to get the same results and need to pump more, or get worse results.
PS- Thats Janga's pic not mine, thanks Janga.
How does that work for thinner tubing that goes inside the hole not over it?
neg. epoxy, plumbers goop, glue etc. is all unsuitable for this job. hose clamp, go buy a hose clamp for vinyl tubing, you'll find it right next to the vinyl tubing. it's a little metal band that clicks tight with a screwdriver.
Thank you. That means a lot coming from you. But yeah, I'm not the sharpest tool in the shed when it comes to spelling. Just think and be horrified at what it would look like if I HADN'T spell checked at all.
Impressive site. It's obvious that you put a lot of work into actually getting some content up there before telling everyone about it.
Not to detract from the above, cause I really do like the site, but spellcheck is your friend.
A. It has dried up somewhat and you only have a small leak, and all you need to do is lube the O-ring up, and do so often to keep it from happening again.
B. The O-ring has ripped. You'll have to cut open the tank, and replace the O-ring. I've only done that on a 2k, and its not that hard, but the tank will leak again.
Those are the two major reasons for the their to be a leak, and the two known ways to fix it. I have had one other idea, but that has yet to be tested. That's where you lube up the pin REALLY well and then put silicone around where the pin leaves the tank. hopefully, the silicone will seal the leak, and the lube will keep the silicone from sticking to the pin so it'll still be able to move.
(edit- Most of what I said has alread been said while I was typing and forgot to hit the submit butten)