nerfer34's Content

#71447 Stefan Sizes

Posted by nerfer34 on 22 January 2006 - 11:17 AM in General Nerf

OK thanks guys ya it was 1/2 FBR.

#71560 Stefan Sizes

Posted by nerfer34 on 23 January 2006 - 09:13 PM in General Nerf

So what fits the best
1/2" into 1/2 cpvc
1/2" FBR into PVC
5/8" into 1/2" PVC

#71662 Possible Nerf Grenade

Posted by nerfer34 on 25 January 2006 - 06:05 PM in General Nerf

Its an okay idea because of a couple of flaws

- I go paintballing a lot and co2 is very dangerous stuff and there isn't a way pvc will stop it from exploding but I bet you could find a way to make it safe
- This is more of like a claymore type thing because the ground must activate the trigger. Are you planning to throw this thing??

#71665 Possible Nerf Grenade

Posted by nerfer34 on 25 January 2006 - 06:27 PM in General Nerf

Yes it's sometimes safe I'll agree.. but when the trigger is held down for a while it isn't safe

Do you plan to throw this?

#71671 Nitefinder Mod...

Posted by nerfer34 on 25 January 2006 - 07:04 PM in Modifications

OK I think you did a few things wrong
-First off ya I don't think playdoh was a good idea. A good Idea would be either to epoxy it or use superglue and then use hotglue to fill space then put a little electrical tape around it
- Secondly a barrel replacement is key to the nf mod. Grab some brass or even cpvc will help.

#71770 Rf 20 Mod Problems

Posted by nerfer34 on 27 January 2006 - 07:25 PM in Modifications

Your Rf 20 got only 15' before the moD! Mine stock got like 30-40'. I think you may have modded it correctly and just have a leak or a messed up gun.

#71904 Rf 20 Mod Problems

Posted by nerfer34 on 29 January 2006 - 08:22 PM in Modifications

I don't think so,I've had 3 rf20s for about 3 months now.

#71936 Double-action Spring Guns?

Posted by nerfer34 on 30 January 2006 - 04:31 PM in Homemades

That would have to be one HUGE trigger pull.
Yes it would it!

If you did want to do that then you would have to have the same amount of force either way, so it kind of would be a little pointless because it wouldn't make it any easier to cock it back.

#71937 Double-action Spring Guns?

Posted by nerfer34 on 30 January 2006 - 04:34 PM in Homemades

That would have to be one HUGE trigger pull

Yes it would it!

If you did want to do that then you would have to have the same amount of force either way, so it kind of would be a little pointless because it wouldn't make it any easier to cock it back.

#71938 Double-action Spring Guns?

Posted by nerfer34 on 30 January 2006 - 04:35 PM in Homemades

If you did want to do that then you would have to have the same amount of force either way, so it kind of would be a little pointless because it wouldn't make it any easier to cock it back.

Whoa what happened I did like a triple post. I am very sorry. How many times can you edit? I messed up when I tried to quote somebody.

#71999 Need Help Regarding Stefan Making

Posted by nerfer34 on 31 January 2006 - 03:12 PM in General Nerf

I grab a pillowcase or a net type thing and put them in the dryer for 5 minutes, works perfectly.

edit changed it to them

#72018 Crossfire Coupler Mod

Posted by nerfer34 on 31 January 2006 - 06:24 PM in Modifications

Nice mod , ya I heard the crossfire was powerful in a small package. Ya the hole in the plunger will slightly affct ranges nothing much though.

#72133 How To Make Good Use Of The Nerf Tech Target

Posted by nerfer34 on 02 February 2006 - 02:56 PM in General Nerf

Where you trying to be funny with that post?

"Sword meet target"

Just no. Also thats a very basic mod that almost everyone has done.

#72265 Nsrtike Hornet?

Posted by nerfer34 on 04 February 2006 - 12:56 PM in General Nerf

How do you utilize the hornet?(steps to shoot it) I find it very confusing.

#72274 The New Ndt Pistols

Posted by nerfer34 on 04 February 2006 - 04:49 PM in General Nerf

They are called cross fires. Many people think they are great. Its the second best buy to the NF. The crossfiires are very good and small backup weapons.

#72275 Nsrtike Hornet?

Posted by nerfer34 on 04 February 2006 - 04:51 PM in General Nerf

PLease does anyone know?

#72299 Nsrtike Hornet?

Posted by nerfer34 on 04 February 2006 - 08:20 PM in General Nerf

Thanks Paloose.

#72301 The End Of Night Finder Production?

Posted by nerfer34 on 04 February 2006 - 08:22 PM in General Nerf

Ya I'm noticing that there are no Nfs in TRU but my Kmart still has some. I'd check Kmart or walmart out.

#72303 At3k Help Asap

Posted by nerfer34 on 04 February 2006 - 08:47 PM in Modifications

I believe your supposed to saw off the barrels to perform a mod.( If that's what you meant)

#72349 At3k Help Asap

Posted by nerfer34 on 05 February 2006 - 10:59 AM in Modifications

OK thanks for clearing things up. Have you tried pulling the bar from the rear instead of the front? What happens? How thick is the bar?

#72445 Micro Titan

Posted by nerfer34 on 05 February 2006 - 10:33 PM in Modifications

I agree with nerfmonkey, I doubt the he wanted the gun for looks. And he made the gun about the same size as a lightnin blitz! Nice mod!

#72584 Any Tips On The Ix-3 Scout?

Posted by nerfer34 on 07 February 2006 - 02:38 PM in Modifications

You could do a spring strech and a barrel replacement. Don't do the peg removal, it doesn't do anything.
Yes, the new tech target pistol is a blue/green scout.

#72610 Rf20 Or Wildfire?

Posted by nerfer34 on 07 February 2006 - 06:17 PM in General Nerf

I think the RF20 is better. Less pumps and slightly better performance, and cheaper.

#72739 Holsters & Ammo Holders

Posted by nerfer34 on 09 February 2006 - 08:55 PM in Modifications

Not a bad holster at all. I'd make it a little neater though. And for the idea of an ammo holder I either put a stock on my gun with like 15 pieces of cpvc across it for holding ammo and strap pieces of 1 inch cpvc to a belt or to the side of my gun.

#72801 Spring Maniac 3

Posted by nerfer34 on 10 February 2006 - 08:23 PM in Nerf Wars

For me april vacation is the 21- like the 29(about). How many guns are allowed for you to bring? Any restrictions on any type of gun? Is everyone using micros?

#72802 Hasbro Press Release 2-9-06

Posted by nerfer34 on 10 February 2006 - 08:31 PM in General Nerf

My question is when they say "clip" , I really wonder how their manufactured clip works. Besides that this sounds awesome but I will only get one or the other so I'll need some feedback by you guys come the fall! Thanks for the update!

#72803 Need Expert Advice On Some Important (to Me) Mods

Posted by nerfer34 on 10 February 2006 - 08:40 PM in Modifications

Try to get PETG Viper is selling it, it fits perfectly in all darts. It's 10$ shipped for 10 feet!

#72807 Worst Gun/series

Posted by nerfer34 on 10 February 2006 - 09:11 PM in General Nerf

My friend and I were discussing and wanted to know what was the worst gun or gun series ever? Does anyone remember?

#72808 Need Expert Advice On Some Important (to Me) Mods

Posted by nerfer34 on 10 February 2006 - 09:13 PM in Modifications

True Nerfmonkey but what I'm saying is Petg is a looser fit than cpvc and brass.
O and I just had an idea. I bet 1/2 copper would work well if your FBR is that thick. I would definitly try the copper.

#72869 Worst Gun/series

Posted by nerfer34 on 11 February 2006 - 06:00 PM in General Nerf

OK thanks for the feedback, Yea I think it was the atom blaster line.

#72930 3b

Posted by nerfer34 on 12 February 2006 - 02:09 PM in General Nerf

Well the BBB is one of the few large(well not pistol sized) that is spring/ manual powered. I personally think it is a must have but many others think differently, I.E Team_Slaya. If you want more reviews check out nerfcenter.com.

#72934 Homemade Tagger Darts

Posted by nerfer34 on 12 February 2006 - 02:24 PM in Homemades

So basically you just took a stefan and put a piece of velcro on it?

#72964 Crayola Barrel?

Posted by nerfer34 on 12 February 2006 - 07:19 PM in Modifications

Can someone explain to me what a crayola barrel does? In what guns would you use it( IE spring, air)? How do you do the mod? Any help would be appreciated thanks.

#72982 Crayola Barrel?

Posted by nerfer34 on 12 February 2006 - 08:24 PM in Modifications

Ok I understand how you make them but do you just use the crayola or do you nest it, etc.

#72998 Crayola Barrel?

Posted by nerfer34 on 12 February 2006 - 10:17 PM in Modifications

A crayola is a barrel. So do you replace the stock barrel with the crayola and thats it or are you supposed to nest it in something?

#73012 Crayola Barrel?

Posted by nerfer34 on 12 February 2006 - 11:48 PM in Modifications

Okay now I understand. But I have 1 more question, how long do you make the crayolas? I know it depends so lets say I want to nest it in PVC?

#73013 Presenting The Snap-2

Posted by nerfer34 on 12 February 2006 - 11:50 PM in Homemades

That thing is nice! What are the ranges?

#73049 Gun Lubricants-lubes

Posted by nerfer34 on 13 February 2006 - 02:40 PM in General Nerf

Yes I searched and found info but still have a few questions.
-Is veggie oil the best lube? What is better?
- Do you only lube spring guns?
- Where do you lube the gun, the spring and the plunger?

#73141 Sawtooth

Posted by nerfer34 on 14 February 2006 - 06:05 PM in Modifications

Welcome, work on the capitalization. To answer you question I haven't owned a sawtooth but every NERF gun can be oppened so either you don't see a few hidden screws or a part of the gun is glued shut(I.E the firefly) Take a flathead and pry, it should come off with ease!

#73154 Gun Lubricants-lubes

Posted by nerfer34 on 14 February 2006 - 08:47 PM in General Nerf

So is my best bet sillicone? Where can I get it?

By content type

See this member's

Sign In