- → NerfKing's Content
There have been 62 items by NerfKing (Search limited from 05-September 93)
I'm wanting a notebook with at least 2GB of RAM but can be upgraded to at least 4, Vista Premium, Dual Core processor, an expresscard 54 port, and it can play HALO 2. I'm pretty much just looking for a notebook that I'm going to be able to keep for awhile without it getting to terribly outdated in just a year or two. Any suggestions on which might be the better choice, or know of an other good notebook for under $1200?
Here's a picture of the "Just Toys" bazooka thing...
It gets about the same ranges a the Airzone one does. An interesting thing about the gun is, instead of a cylinder shaped tank, it has a cube shaped tank...
The Lamari 2500 is the oldest brother to the 3K family. To my understanding, the main difference between the two is that the 2500 used air-presure to advance the barrels, and the the rest of the 3Ks used a catch, next to the pump, to rotate the barrels.
Larami 2500 and SM3K yellow were the same thing I thought?
The Lamari BallGun uses the the tank of the back as the air resivor(sp). So it you go the route of using a system like the BallGun, you could just use 1 foot of 2" PVC with an end cap on one side and use reducers to bring the PVC back down to 1/2" or so.
larami ballgun rubber tubing.
No, it is a level shot. No wind on the day I measured.
I reckon you're talking about angled range, 'cause all you did was make a really long barell.
The barrel only sticks out about 2" from the original barrel.
Yes, there are a few PETG mods out there, but none like the way I modded mine, and the result I got were better thanmost of those mods.
Thats not new, alot of people have petg'd ttg's.
My only confusion is that it doesn't look like 8" of PETG in the pic.
Well, In the picture it isn't 8" of PETG. The first TTG I modded had 8" of PETG, but on this one I decided to experiment with 6". The results weren't as good as the first TTG I modded(Which was modded the exact same way.) so I put 8" in the write-up.