Jump to content


Pineapplepies's Content

There have been 132 items by Pineapplepies (Search limited from 17-November 92)


By content type

See this member's


Sort by                Order  

#359151 Caliburn: Mag-fed Pump-action Springer

Posted by Pineapplepies on 10 April 2017 - 06:55 PM in Homemades

Do you think you could put a k14 in this? The power is great but what if we went higher fps, I know some homemade come in at like 230 fps like xellas in coops video so if you wanted to could you actually go the extra mile and use the strongest spring I know of.



#353884 Ebay Stock Dart and Acronym Guide

Posted by Pineapplepies on 01 June 2016 - 07:36 AM in Darts and Barrels

Another thing about ACC darts is that they don't always feed reliably in flywheel blasters.


Yeah not sure if you know this or not but that has been known ever since they were first found as "chunlin" darts. If I remember correctly I was sadly one of the first to find that ACCs don't like flywheels the hard way after my demolisher decided to fling the head about 15 feet while the foam was still stuck in the magazine.



#353499 Ebay Stock Dart and Acronym Guide

Posted by Pineapplepies on 16 May 2016 - 07:40 AM in Darts and Barrels

At ice nines request here is a link for buying those new artifact darts that have started popping up in different places and are basically cut down ACCs in larger and cheaper amounts(darts sold here have been confirmed to be the artifact darts and I'm not sure if this link will ever go away unless production stops) http://www.buychina....ad-wtvqtuoqlhjm

Edit:not sure if this is considered a taobao link since what is above is the url from taobao on buychina.com but it is translated so it should be less confusing plus these can be shipped to places like Canada too



#353960 Ebay Stock Dart and Acronym Guide

Posted by Pineapplepies on 04 June 2016 - 12:23 PM in Darts and Barrels

I've tried ACCs in my 4B but they just start tumbling mid air everytime


Try cutting them down, that has seemed to help a lot of issues like the one you have run into, and the cut down ACCs/bulleyes(Long live the name 2BlueBros proposed!)also are a little more accurate than full length ACCs



#353909 Ebay Stock Dart and Acronym Guide

Posted by Pineapplepies on 02 June 2016 - 08:20 AM in Darts and Barrels

That's definitely a dislike lol. Is there a best flywheel blaster dart for the rayven?

No not at all I love ACC darts just pointing out that I learned the hard way that they do not like flywheels  :P and koosh darts are good for any flywheels unless you have a flywheel gun with that "rifling" since it seems to catch the head of koosh darts and make everything terrible (so in other words you need to remove that "rifling" or sand it down to use koosh darts but it is worth it and should be done)




#360127 2017 Modification/Homemade Contest

Posted by Pineapplepies on 26 May 2017 - 01:02 PM in General Nerf

 

 

 

 I'm confused. What's an "Ultimate" blaster mod writeup? 

 

In general, though, if you build a blaster and you take the pictures and you write the instructions (i.e. don't copy and paste), you're eligible. Ideally, if your mod is based on someone else's work, you at least have something a little extra to make it "yours." Even if that's mostly an aesthetic addition.

 

Also, be sure to credit whoever your work is based on.

He is refering to lorddraconials way of calling his "everything basic" type mods, for example: a non-cut, non-painted firestrike with increased seal, padding, spring, ar and lock removal, and nothing besides that. It's a maxed out blaster without any shell painting, reinforcing, or crazy additions, and excludes anything related to replacing or improving parts. It's a extreme sleeper if you know what that is, no modding can be detected unless you look very closely or note the slightly different spring.(In fact this is honestly sort of overpowered in some cases because you can bring it to a stock only war and have it pass for a regular blaster, and the preformence isn't enough different to get you kicked out, but enough to provide more range).

 

 

Heh heh, sorry for not explaining that part... What I meant was, all the basic, easy modifications in one big write up (ARs, better seal, spring upgrade, no deadspace, lock removal, reinforcements, and a paint job).
Hope that clears it up... Sorry for the confusion.

Bubba, i would caution you on making a ultimate blaster, because Jwasko said you have to change at least something something to not plaugerize, and as you know drac has MANY videos out there. However, my suggestion would to be is do what you asked about, and then put something crazy, or add some special features and or cosmetics to make it earn more points, because every point counts!

 

 

Jwasko, so let me get this straight, are modded water blasters allowed? And like do you have to have an amazing paintjob or colors to get a lot of points in the aesthetics category?




#360128 JSPB B&B mini-hopper

Posted by Pineapplepies on 26 May 2017 - 01:14 PM in Homemades


This is a design that is easy to make and it can allow firing shots in rapid succession.

Holy crap, not the greatest english, but who cares, this is amazing, mad props man.This looks amazing, if you could post the files you made this from and the parts list, I would imagine the whole community would thank you. Also, besides posting the files, try selling these! I can tell you depending on the price i would buy one of these

 

Edit:if you are with the JSPB group, tell them their products are great, but it would be appreciated if files for this were given out. I know you want to make profit off of these, but do everyone a favor and allow this to be open source if they want, and give the files out. I can tell you that it won't really impact your sales, in fact you may sell more because there will be many ways you can do it, aggressive and closed marketing is what made sites like tacticoolfoam.com get bad reviews and a bad rep, don't follow that path.




#348929 Chunlin Darts on Amazon, similar to Xplorer darts

Posted by Pineapplepies on 02 October 2015 - 11:53 AM in Darts and Barrels

I have tried them already, and I used them with a slightly modded Demolisher and they seem to hate flywheels and don't really feed them, but are very accurate in blasters like the Firestrike and non-flywheel clip fed blasters.
Edit:Seems like racer was right, they do work in flywheels. I tried the darts in my Stryfe and they worked, but not in the Demoliser though.



#349922 Chunlin Darts on Amazon, similar to Xplorer darts

Posted by Pineapplepies on 09 December 2015 - 10:39 AM in Darts and Barrels

 

Do yo u have the link for the chunlin darts? They've been taken off of amazon.

http://www.amazon.co...rts bullet head

This should work, sorry for not shorting the link to one word but I couldn't find how to do it with the new interface. So if someone knows how to make a long url show up as a single word please tell me.




#350846 China Darts Review

Posted by Pineapplepies on 18 January 2016 - 10:20 AM in Darts and Barrels

Oh, ok. So are those better than the china darts? I would think they would be lighter but I haven't weighed them so I'm not sure. I may order some if someone's tested them in the same way as these to make sure they fire from hoppers from homemades as straight as regular Stefans.

Yeah, in a way they are, Walcoms7 did a video on them and I believe they have equal if not more weight(since they head has more volume) They lowest price I have found them for is around the same of the lowest you can find Fvj's for, so these may be a alternative.(Walcoms7's review is on YouTube, look under videos and it should be near the top, although the ones he reviewed were the ones on Amazon. They still are the same dart though)

Edit:Sorry, I didn't read what you said about them firing straight out of a gun until now. Walcom did fire them out of a Longstrike with a Berzerker tank in his review and I believe they fired well.



#350843 China Darts Review

Posted by Pineapplepies on 18 January 2016 - 10:05 AM in Darts and Barrels

I have seen both of these on Amazon, and they appear to have solid rubber heads. Not as squishy as these black ones, but still better than FVJs.
http://www.amazon.co...019PIYYRW?psc=1
http://www.amazon.co...VNZRTYW8DEGY2H4

In no way do I mean to be a jerk or rude to you, but I would recommend to get those off of eBay by searching nerf darts bullet head and scrolling down. The price of them gets down to about $4 for 100 and that is about three times less than the ones on Amazon.http://www.ebay.com/...a0AAOSw3ydV3LHt



#350897 China Darts Review

Posted by Pineapplepies on 19 January 2016 - 08:00 AM in Darts and Barrels

Looks like the VTNs are lighter so they may not work as well as ACCs out of high velocity blasters, but no way to know for sure but to try.
 
One thing the ACCs have going is it seems like they have a short stem. This means that a) most of the weight is in the actual tip (better for flight stability) and B) they will bend easier when going through a hopper.

Again, not trying to be rude but above I said Walcoms7 on YouTube did do a review on this type of dart and it worked fine out of his berserk long strike, so yes they do fly as a well as a Fvj but are as aerodynamic as a ACC or bullseye(As 2ndbluesbros proposed and I liked)
Edit:If there was a comparison between the bulleyes and the cut down Fvn darts to slugs and stefans, it would be stefans to Acc, and Fvns being a more aerodynamic slug



#352176 China Darts Review

Posted by Pineapplepies on 13 March 2016 - 12:30 PM in Darts and Barrels

In my use of these darts (Black ACCs) cut down, I've had much better luck hoppering them. They fed reliably more than 75% of the time. When I tried to fire them out of my XBZ longstrike, however, I had the tips flying off every other shot, with no dart lasting longer than 2 or 3 shots. I tried reinforcing the darts with straws, and filling the straws with hot glue, and that certainly stopped the heads from flying off. This straw reinforcement gave the darts too much rigidity, though, and they won't hopper at all anymore.

Ok, I would watch the news on those new prototype ACC's that are going to be not black and will have a longer stem.(that will help with the heads flying off) Those darts will probely fix that problem you are having but if you can't wait buy some vinyl tipped nipple darts but do realize they are basically aerodynamic FVJ's:http://www.ebay.com/...C0AAOSw5ZBWLYpW



#350833 China Darts Review

Posted by Pineapplepies on 17 January 2016 - 02:57 PM in Darts and Barrels

This looks pretty appealing beyond the black foam color.


I know where to find things like with with different colors, only problem is that they are plastic tipped but if you are fine with that here they are. http://www.ebay.com/...a0AAOSw3ydV3LHt



#352153 China Darts Review

Posted by Pineapplepies on 12 March 2016 - 04:58 PM in Darts and Barrels

You need the image to be uploaded somewhere on the internet first.  Get that web address.
 
Then, put [ i m g ] (without the spaces), then the web address, then [ / i m g ] (also without the spaces.  There is also a button above the text field (Next to another button that looks like <>, its a mostly green box) that will help you with this.
 
I'm guessing you are Artifact Blaster Mod Works from Facebook?  I'm glad you found us on Nerfhaven (I was just recently asking about these same darts I think)
So for the image (from aformentioned facebook page) with the address (Long links automatically get shortened and turned into a hyperlink):
 
https://scontent-sea...405&oe=5760A425
 
add the image tags, and it should show up without users needing to use the link:
 
12592243_1657755167817331_15557831486783

Wait hold up, Just now realized that from the picture it seems Kane has the VTN's I linked above in this post. Kane, if these are In fact not the same as the ACC's can you do some extensive testing (Fire them out of a stock, modded, and homemade blaster and if possible compare them to the black ACC's) on those since I want to know if these are better than the ones Cheerios tested with.



#351255 China Darts Review

Posted by Pineapplepies on 30 January 2016 - 12:04 PM in Darts and Barrels

If the one Pineapplepies showed the link to are the same as the ones I got from the link below I can tell you that they are not the same as ACCurate darts.  The red ones have tips that are solid and hard.  Not something I want to be shooting at little kids.
 
Here are what I bought to test.  
http://www.ebay.com/...b0AAOSwDNdV6TYc
 
If anyone wants me to cut them open to show just let me know.  
 
LGN

If you could test how well they work out of a variety of blasters with some being cut down and some being full that would be great. Along with that, I will try and test the same blasters as you with the ACCs I have if you don't have any of the ACCurates/Bullseyes. Finally, If we end up both testing the darts tell me how long you cut them down, what blasters you use, and what angle did you fire them at.



#350906 China Darts Review

Posted by Pineapplepies on 19 January 2016 - 01:16 PM in Darts and Barrels

Alright, fine, I'll listen to Walcom's yammering ;)
 
Anyway, yeah they do seem lo launch well in his video. I would still want to actually see how they fly over long distances, and out of a homemade springer. For instance do they seem to "float" after a while, do they suddenly drop, or do they maintain their velocity nicely like well made hot-glue domes with heavy weights?

Which darts are you talking about, Fvn or bullseyes/ACCs? If you are talking about the darts this post is about, Acc darts, then they fly very straight for the most part. Along with that, these are the most accurate and farthest flying darts I have when fired out of a Titan too so that answers the high powered blaster question.



#350844 China Darts Review

Posted by Pineapplepies on 18 January 2016 - 10:09 AM in Darts and Barrels

Those are FVJs, a different kind of dart. They are good as well but not really as good for shooting from heavily modded blasters or homemades.


Yeah, I know they are like Fvjs. I was pointing out if you want a aerodynamic dart and need to fire it out of high powered thing then those are the darts to go with, along with them being more brightly colored.



#350716 China Darts Review

Posted by Pineapplepies on 12 January 2016 - 10:00 PM in Darts and Barrels

Cool, I have these too and was considering cutting them down and doing the same you did but just didn't. Also, I disagree that these hurt more than slugs, but I am not stating that it isn't possible that they can hurt more. Finally, although it doesn't matter too much, most people including me refer to them as either ACC darts, accurates, or Chunlin darts(after the seller on amazon were originally found) and while I don't mean annoying about it but it may help some to know what exactly these are called or at least have a name for these.

http://www.amazon.co...rts bullet head(where I bought mine)



#355057 Artifact darts

Posted by Pineapplepies on 17 July 2016 - 07:25 PM in Darts and Barrels

 Still hoping for a miracle or design improvement on Artifact's end,  this is the closest the community has ever come to a legit source of darts

Can't agree with you more that a lot of potentially amazing darts have gotten so close to being created then just dropped. Artifact himself came on here and posted about new darts that would of if the design worked and the darts were cheap they would be the best and most bought of darts on the market. But then he kinda just went silent and the prototype new ACCS turned out to be not as rubbery as ACCS and sadly about as pricy as the original. I am wondering if you could try to find a way to weigh them down more by using some magical fairy dust or something non metal to fix the not flying straight at high speeds.



#350832 Trustfires or Ultrafires or IMR?

Posted by Pineapplepies on 17 January 2016 - 02:44 PM in Modifications

No matter what, a full rewire (or even full internal upgrade including microswitches and a lipo connector) will be complimentary or even required.


Ok, but the only problem is that I don't know where to get the wire for rewiring my Demolisher. I also have not attempted anything like that so if you can tell me where I can find a tutorial on how to rewire and remove locks like the thermoresister that would be great since I don't want to end up blowing my self up when I severe the wrong wire.



#350806 Trustfires or Ultrafires or IMR?

Posted by Pineapplepies on 16 January 2016 - 12:15 PM in Modifications

So some of you may or may not of seen the topic that I posted about my Demolisher not reving as a result of putting trustfires in with regular double A's, and in the end I am forced to buy new batteries. I am wondering, for anyone who uses double A replacement batteries, what would you recommend:Trustfire or ultrafire or IMR? Along with that, does it matter if they are protected? And finally, what charger would you recommend for your favored battery?



#350860 Trustfires or Ultrafires or IMR?

Posted by Pineapplepies on 18 January 2016 - 04:59 PM in Modifications

Good demolisher rewire tutorial: https://www.youtube....h?v=fsj_G2gGxoc
 
Never rewire while a battery is attached. Follow that rule, and cuttin g a wire will never result in things blowing up.
 
After a rewire, always test with normal AA batteries first. If they heat up or act weird, you have a short (which would be bad with the various lithium batteries). If everything seems good, then put in your NiMH'lithium/whatever batteries.
 
"protected" trustfires

Wait so should I not be using the trustfires, or was that just a result of overcharging which is something I am in fact aware of.



#350830 Trustfires or Ultrafires or IMR?

Posted by Pineapplepies on 17 January 2016 - 02:33 PM in Modifications

Is this a normal unmodded demolisher, or doesn't have just basic mods (lock removal, etc)?
Mixing batteryou brands and types is never good, mixing trustfire and generic AA could have damaged your motors.
So the question is, does it still rev if you use just generic AA batteries?

Yeah, I know it is not good to mix batteries, I already had a topic about that. Also, Yes, it does still work just fine.



#350831 Trustfires or Ultrafires or IMR?

Posted by Pineapplepies on 17 January 2016 - 02:35 PM in Modifications

IMRs are good. If used with stock motors use no more than two. Use "dummy batteries" like these, not more AA batteries to fill the other spots.
 
NIMH  rechargeables like Eneloops are also good. With stock motors you can use four.
 
 
Trustfires and Ultrafires are horrible and may explode on you and/or burn your house down.

Well why do you think I got the protected ones? Along with that, could you link a charger for the IMR's if there is any?



#349827 Using Gen 3 Koosh darts in a Rapidstrike

Posted by Pineapplepies on 04 December 2015 - 12:48 PM in Darts and Barrels

Anyone use 3rd generation Koosh darts in a Rapidstrike? I noticed every 6 or so shot out of the my Rapidstrike tend to twirl, spin out, or helicopter.

 

Anyone else observe this and if so, do you know what the cause is and how to fix it? I wonder if removing the skirt might help?

There is a way to remove the skirt, and although it may not help, I would still do this anyway since removing the skirt lowers the chance jamming by a lot. What you need to do is open up the jam door without a clip in(make sure there is no way the flywheels can activate) and stick you finger in the part where the darts enter into the flywheels. Then bend your finger down and around and then yank it out. If it does not work try getting at it in a different way or use really long needle nose pliers




#349830 Using Gen 3 Koosh darts in a Rapidstrike

Posted by Pineapplepies on 04 December 2015 - 02:33 PM in Darts and Barrels

Thanks for the advice. I'm looking into transitioning to using a Stryfe, but I will probably remove the skirt to see if that fixes the problem. I question whether it will, because I understand that skirt helps center the dart before going through the flywheels and I imagine the spinning out is due to some darts existing the flywheels off center (just a theory).

 

Also, I never have jamming issues (although I'm just running 6 NiMH cells).

I didn't know that the skirt did that, since it didn't do anything wrong to my freind's Demolisher when I took off the skirt because would not stop jamming.




#349356 Second new worker thing that I have found on ebay

Posted by Pineapplepies on 29 October 2015 - 03:41 PM in General Nerf

So I was browsing ebay again since why not, and stumbled upon yet another worker thing that looks promising. Link
Reason why I bring this up is because I am wondering if this should be bought, since this could possibly make re-barreling a mega gun very easy and would be a very good for a noob at modding.



#349905 Second new worker thing that I have found on ebay

Posted by Pineapplepies on 08 December 2015 - 12:28 PM in General Nerf

If you don't care about being shamed by the nerf modder masterrace i think it is a definitely good purchase.   

 

People can call me a newB for this but who cares: I bought the rebarreling kit from worker and pushed them into a cycloneshock, BOOM! instant gratification my cycloneshock now shoots koosh darts as accurately and as far as most modified springers and the "mod" only took about 16 seconds.  

Thank you, that answers my question about knock off darts. I just had that feeling during bobololo's review that the horrible accuracy was due to the flaw in elites, and sure enough I was correct!




#349575 Second new worker thing that I have found on ebay

Posted by Pineapplepies on 22 November 2015 - 06:09 PM in General Nerf

Bobololo has a review of the cyclone shock set on eBay and walcom27 has the rotofury set reviewed as well. Might help you make a decision.


Thank you for telling me, those videos are great but still didn't answer the one thing both of them forgot to test. That thing is if it works better with Fvjs and those accurate darts, thank you anyway though.



#349232 ZombieStrike Stormfire Plunger Replacement

Posted by Pineapplepies on 22 October 2015 - 12:11 PM in Modifications

Looks pretty neat, although you could use a pvc tee, small piece of pvc and a end cap to make a handle if you want to make it like a rifle.



#348994 Need some info about these darts

Posted by Pineapplepies on 08 October 2015 - 10:06 AM in Darts and Barrels

Just received my glow darts from vwillshop777. They seems to be a good quality and compatible with elites. They do NOT have a hole in the tip either. The tip feels as if it is pure rubber. I may dissect one and post it here if people are interested.

Do you know if they hurt as much as the hard plastic tip darts? I have some solid plastic ones and need solid rubber darts that don't hurt as much.



#351368 Cheap China Knockoff Darts

Posted by Pineapplepies on 06 February 2016 - 10:28 AM in General Nerf

The nipple Stefan darts from China look interesting, but they have been pulled for some reason, they look a lot better than the ACC darts, here's their FB page...https://www.facebook...57733731152808/

Hmm, interesting. I think that these may just be the tops of ACCurates on foam from fvjs and what not. I partially preposed this idea in the thread Cheerios posted and I am glad to see someone may have had the same idea.
Edit: If these do turn out to be just a cut down ACC head glued on to another bullets foam, then just cut down ACC darts and be done with it.



#349331 Barrel Length for Air Blasters

Posted by Pineapplepies on 27 October 2015 - 07:44 AM in Darts and Barrels

It matters what tank. If its a mid volume one like a at3k/2k then 12in of airgun fit. If its a larger volume blaster like a big blast it will need 16-20 depending on dart fit. Some air guns like the sm1500 have a faster air release, which means you should tighten up your barrel so its atleast a push fit. This is mostly just my opinion, from what ive read and seen from videos, but i may be wrong and if i am please correct me below.

What if I have a titan and am using cpvc from Lowes for barrel material? I currently have around a 10 inch barrel and am wondering if I should add 6 inches of cpvc or more.



#349236 How can I rebuild my Deploy CS-6?

Posted by Pineapplepies on 22 October 2015 - 03:28 PM in Modifications

How can I rebuild my Deploy CS-6? I modded it but can't rebuild it. I alredy searched and can't find anything. I have get out all pieces like in here. I need a step by step instruction, but a video would be perfect. Can someone please help me?

How did you mod it, spring mod, or did you take everything out like the picture? Along with that, why did you want to mod a deploy in the first place?!?!



#352388 Requesting Site Feedback

Posted by Pineapplepies on 23 March 2016 - 10:36 AM in Site Feedback

[url=https://youtu.be/RL6QLOlr_L8]This thread exists because the moderation staff (me in particular) wanted to clarify some existing misconceptions, and misunderstandings, about NerfHaven's moderation policies as well as ask users for honest feedback about what they like and don't like. Feel free to be totally honest; this is a "safe space," in the sense that no opinions* will cause you to be banned.

I have a few things to say but first I would like to put out there that some of you may remember me posting the topic "why is this wiki(learned it was a forum later on) so strict?" My point in pointing out that I was that person was since I got a lot of responses that in essence told me to first lurk until I wasn't a FNG, and that the strictness is what holds this site together. Secondly, while I won't try to offend Killzone here, but I think the admins should prevent threads like "Merf.co" from being so confusing by either taking it down or editing it. The reason why I think this should be done is since that overall the above thread made no sense whatsoever, and if I was new my reaction to that thread would be to leave the forum.(as a result of it making zero sense and all responses not helping at all.) Finally, this is more of a personal thing but I believe we should have a thread dedicated to semi-tricky mods like rewire/voltage boost guides for flywheels(since I am still working with Trustfires and have no clue how to rewire a nerf gun){side note:someone needs to correct and rework the modification directory}



#349192 Why is this wiki so strict?

Posted by Pineapplepies on 19 October 2015 - 12:11 PM in Site Feedback

I don't know if this has been asked, but I want to know why this wiki is so strict on posting, trading, and in general? Along with that, why is there a post limit, couldn't you just simply have a spam cooldown where it would stop you from spamming? Please give your input if you agree that this wiki is a little strict, and I would like to put out there if I end up being banned for this post, you are just proving my point. (Also please tell me if I am doing anything wrong)



#353415 What Trustfires to get?

Posted by Pineapplepies on 12 May 2016 - 10:02 AM in General Nerf

But only get LiPo if you know how to care for them properly.
 

Heh heh that was my post you linked and since that post was "dead" I have been looking into rewiring my demolisher for a lipo and hear a lot of this. What does everyone mean by care for them properly besides just common sense? That honestly is the one reason why I haven't rewired yet since I have been worried that you need some crazy discharging method for lipos otherwise it will blow up in your face.



#353477 What Trustfires to get?

Posted by Pineapplepies on 14 May 2016 - 10:03 AM in General Nerf

Don't let the voltage drop too low (use a voltage meter or alarm)
Don't over-charge (i.e. raise the voltage too high)
Don't short the battery...always try your blaster with regular batteries and see if they get warm before you ever connect your LiPo. Relatedly, make sure all connections are well-insulated and secure. You don't want a short to happen during play.
Store LiPos in a cool, dry environment at a proper storage voltage. While in storage frequently check the individual cell voltage; they should be the same (aka balanced). Also look for any signs of the pack swelling.
Make sure the pack doesn't get punctured or squeezed in the blaster (or otherwise)
Use a proper charger (balance charger) and again make sure the cell voltages are all the same after charging/discharging.
Never leave a LiPo to charge unattended. Preferably do it away from flammable objects, and put the LiPo in a charging bag (which will prevent the spread of fire).
Go on an R/C site or something and read even more Do's and Don'ts.
 
By most accounts modern LiPos are more stable/safer than older ones but they still require care to prevent injuring yourself and others, or burning down your house.

Sounds a lot easier than I thought it would be and also when you say make sure to check the individual cells how would one do that is there some sort of device you need to check it or do you mean just charge it to a certain level?
Edit:have no idea if this a stupid question or not but just don't know much about lipos but for the most part here how good they are and how you should use them over all other battery types



#358675 Retaliator mods.

Posted by Pineapplepies on 21 March 2017 - 10:27 AM in Modifications

Get a Longshot and carve away the bipod so you can add a pump grip. Use your Stryfe as a sidearm, or run a Hammershot with expanded cylinder. Get a Titan, 4B/UMB/XBZ, drain blaster, or other powerful system and make a Demolisher missile launch tube and a handful of Absolver shells.

How exactly do you make a absolver shell for like the demolisher or in general? I know this may be a stupid question but haven't seen anything on that