- NerfHaven
- → Super0dp's Content
Super0dp's Content
There have been 63 items by Super0dp (Search limited from 07-December 96)
#324449 Nerf rougcut. Where?
Posted by Super0dp on 13 December 2012 - 05:30 PM in General Nerf
#324024 New nerf elite releases.
Posted by Super0dp on 30 November 2012 - 11:43 AM in General Nerf
So most of us know about the rampage, retaliator, and the Hailfire. The stockade blaster IS confirmed by nerf, yet I have not seen one. Recently nerfs Facebook page released a statement showing two new elite blasters,(the strongarm, and the stryfe). recently on youtubeland, bobolobo (link here ) showed a review of the stryfe, and pictures of the strongarm showed up on ebay. Has anybody actually seen the strongarm, or the stockade, or the newest addition, the rayven based elite blaster?
As you said, the stryfe is confirmed. PsykSG made a video on youtube about the RoughCut 2X4 which is realeased in malaysa. The firestrike and the Triad are confirmed by people in singapore and youtube. The strongarm was only spotted on Ebay but I suspect it will be on the list as well.
#323627 Paint: Were to buy and what kind
Posted by Super0dp on 16 November 2012 - 12:17 PM in General Nerf
Threads pertaining to only a very small subset of the NIC due to geography or other factors will provide no useful information, and also extract no useful information. Nerfhaven is not your personal search engine.
#323613 Posting Pictures
Posted by Super0dp on 15 November 2012 - 07:44 PM in Site Feedback
#323553 Posting Pictures
Posted by Super0dp on 14 November 2012 - 08:54 AM in Site Feedback
#323550 Posting Pictures
Posted by Super0dp on 14 November 2012 - 08:28 AM in Site Feedback
#323384 Tee shirt launcher help.
Posted by Super0dp on 08 November 2012 - 09:58 AM in Off Topic
#323311 problem with vortex blasters dropping mags?
Posted by Super0dp on 04 November 2012 - 07:34 PM in Modifications
#322821 Nerf gun motors, problems and solutions
Posted by Super0dp on 20 October 2012 - 10:00 AM in General Nerf
#322744 Nerf gun motors, problems and solutions
Posted by Super0dp on 18 October 2012 - 11:42 AM in General Nerf
Holy shit, totally justified necro. Got a part number or a product link?
I dont have a part number but if you go to the Tamiya U.S. website you can find the mini 4x4 and the parts. I'm sure with 15 min of google searching you can find it. SGnerf at his website compares Nerf motors with this exact motor
#322742 Nerf gun motors, problems and solutions
Posted by Super0dp on 18 October 2012 - 11:16 AM in General Nerf
#321836 Screw Cap (a.k.a. Snap Cap) Dart Heads
Posted by Super0dp on 21 September 2012 - 08:13 AM in Darts and Barrels
Maybe shooting your friends with toxic heavy metals is a slight step backwards? Not to mention that everyone pretty much gave up on these.... In April. When they were shown to break apart on impact. And possibly injure people. WITHOUT ALSO GIVING THEM LEAD POISONING.
I understand were your comming from but for a person (me)who is serious and cant make a slug, or a hot glue dome to save his life, it is a safe way to get accurate, well made darts and with a little experimentation I can find a safe alternitave to a washer. as for the breaking problem I tried silicon to seal the dart head and after several shots from a 4b at a brick wall the head did not break. This was my experiment and results. I was hoping to revive this dart because this is a great alternitave to slugs, hotglue domes and pre-formed dart heads. In no way was I trying to hurt anyone or piss anyone off. i hope you can understand that. As for the dart I found a way to prevent it from breaking: Use silicon to seal the head on the inside.
#321769 Where To Buy Modding Materials
Posted by Super0dp on 19 September 2012 - 08:14 AM in Modifications
Edit: yea sorry for talking about amazon again even though its in the forum already. but the prices were not talked about and so that is a good piece of info.
#321768 Screw Cap (a.k.a. Snap Cap) Dart Heads
Posted by Super0dp on 19 September 2012 - 08:09 AM in Darts and Barrels
Stop posting in old threads that no one cares about anymore. Reread the Code of Conduct and New Members Guide.
#320944 Working Silencer
Posted by Super0dp on 24 August 2012 - 03:12 PM in Darts and Barrels
#320943 Nerf gun motors, problems and solutions
Posted by Super0dp on 24 August 2012 - 02:39 PM in General Nerf
#320496 Screw Cap (a.k.a. Snap Cap) Dart Heads
Posted by Super0dp on 15 August 2012 - 07:54 AM in Darts and Barrels
#320407 Nerf Maverick
Posted by Super0dp on 13 August 2012 - 12:03 PM in Modifications
Over the weekend, a few friends and I bought some Nerf guns while we were out of town.
I already have a few at home, so I thought that I would buy a cheapo just to pass the time. It would make a fun secondary, after my Raider or Retaliator.
I bought a Maverick, and have been modding it. Here is what I have done:
- did the Russian roulette mod
- removed air restrictors
- increased the air seal on the plunger tube with teflon tape
- added spring compression by adding 4 pennies to the back (also reinforced that area with hot glue)
- added a trigger spring to improve the rotation mechanism
- added foam in parts of the gun to lower rattling noise
- removed dead space from the barrel's entrance using hot glue and straws
- added a spring to the front assembly of the barrel to improve the air seal there
What else can I do? What kind of spring should I get?
Should I just get the Maverick spring on Orange Mod Works? I was going to buy a mod kit for my Raider there soon.
I'd like to get some PETG tubing to improve the seal inside the barrels, but I have no idea where to buy any. Replacing the barrels with PVC seems like too much work. I'd rather just insert PETG.
I made a cool maverick with a rear loading mod and brass barrels. Just get some brass and shove them down there. Then use craft foam to improve the seal to the turret
#320282 Holsters
Posted by Super0dp on 10 August 2012 - 08:41 AM in General Nerf
Yep, and I've improved on the design. It works well enough I feel that it is very useful even though we all use hoppers and such.
Also, just posted a write up.
magnetic holsters are fine in all but for even cheeper you can use heat-bent pvc, just heat up a pot of water to a boil (it has to be a huge pot of water, atleast 8 in deep), cover the front shell of your blaster in silicone grease, dip the pvc in the water and form the pvc to the blaster. when its formed, dip the pvc, blaster and all into ice water. BOOM instant holster. you can drill holes into it and mount it however you like. i got this idea from a friend.
im freakin tired of the quote system messing up!
#320211 Nerf Elite Retaliator problems, reviews and mods
Posted by Super0dp on 09 August 2012 - 10:28 AM in General Nerf
#320204 Holsters
Posted by Super0dp on 09 August 2012 - 06:54 AM in General Nerf
, leather sounds a bit over the top and expensive in my opinion, but will look into your other suggestions,.
[/quote]
I buy a pack of random leather strips from hobby lobby and weave my own holster, the bag of strips has enough for like 3 maverick sized guns and only costs 5 bucks. It's strong, flexible and it's fun to make.
The quote thing messed up, I'm still learning.
#320131 Nerf Elite Retaliator problems, reviews and mods
Posted by Super0dp on 08 August 2012 - 07:17 AM in General Nerf
#320095 Dartsmithing Tips Archive
Posted by Super0dp on 07 August 2012 - 04:26 PM in Darts and Barrels
- NerfHaven
- → Super0dp's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·