- NerfHaven
- → Kid Flash's Content
Kid Flash's Content
There have been 1000 items by Kid Flash (Search limited from 13-May 97)
#292684 Modification and Paintjob Pictures
Posted by Kid Flash on 12 January 2011 - 02:14 AM in Modifications
done:
quick slip connector, so that i can attach a pump/pvc tank/hpa rig:
holes where the tubing comes out are pretty clean:
EDIT:
well, last night I decided (with the encouragement of TaerKitty) to build my SalvoFly, BigFly, FireSalvo, etc (I personally like SalvoFly the most).
#292734 Modification and Paintjob Pictures
Posted by Kid Flash on 13 January 2011 - 04:35 AM in Modifications
Since I took these pictures, I have changed the tubing location around a little, and added a piece of plastic to the priming bar. I will be posting final internals later, when this is finished. Once this is done, I will start working more on my MS bladder backpack. I just need to buy some 4 inch PVC and 4 endcaps to go along with it. The backpack will be using 2 MS bladders, unless I don't get a good amount of shots off, in which case I will be adding another.
#293732 Modification and Paintjob Pictures
Posted by Kid Flash on 02 February 2011 - 02:15 PM in Modifications
Tank expanded 4B. Currently for sale in my sales thread.
#292603 Modification and Paintjob Pictures
Posted by Kid Flash on 11 January 2011 - 05:33 AM in Modifications
#291180 Modification and Paintjob Pictures
Posted by Kid Flash on 19 December 2010 - 06:50 PM in Modifications
#288597 Modification and Paintjob Pictures
Posted by Kid Flash on 19 November 2010 - 01:21 AM in Modifications
4B (modded by BrokenSVT)
#290562 Modification and Paintjob Pictures
Posted by Kid Flash on 10 December 2010 - 01:59 AM in Modifications
Mods:
Minimized
Spring added
1/2 inch PVC coupler
1/2 inch cpvc air output
Very padded plunger head
Almost air tight seal
Soon to be N9's
#290568 Modification and Paintjob Pictures
Posted by Kid Flash on 10 December 2010 - 11:18 AM in Modifications
#293903 Modification and Paintjob Pictures
Posted by Kid Flash on 05 February 2011 - 01:08 AM in Modifications
And of course, If you Click Here you will be linked to my video on it.
#294699 Modification and Paintjob Pictures
Posted by Kid Flash on 18 February 2011 - 10:13 PM in Modifications
I also have internal pictures for my SalvoFly V2:
And a VIDEO!
#297496 Modification and Paintjob Pictures
Posted by Kid Flash on 24 April 2011 - 01:52 AM in Modifications
(Let it be known that the wires aren't soldered on to the switch yet... but you can see how it would work)
#297830 Modification and Paintjob Pictures
Posted by Kid Flash on 03 May 2011 - 10:57 PM in Modifications
Also,
#298208 Modification and Paintjob Pictures
Posted by Kid Flash on 16 May 2011 - 05:45 PM in Modifications
#296685 Modification and Paintjob Pictures
Posted by Kid Flash on 27 March 2011 - 12:36 AM in Modifications
I may or may not have received these (pure deliciousness)...
#296443 Modification and Paintjob Pictures
Posted by Kid Flash on 22 March 2011 - 01:24 PM in Modifications
#295302 Modification and Paintjob Pictures
Posted by Kid Flash on 03 March 2011 - 07:30 PM in Modifications
#295791 Modification and Paintjob Pictures
Posted by Kid Flash on 11 March 2011 - 11:04 AM in Modifications
I'm working on the Iron Man Super Soaker. It's coming along, and I just got the trigger all hooked up. I just need a pump, and to decide what tank to use for the integration. Part of me says Big Salvo, while the other part says triple strike...
#120059 Modification and Paintjob Pictures
Posted by Kid Flash on 16 August 2007 - 07:40 PM in Modifications
the nite finder
the goodwill gun i got for a quarter
my maverick
#237326 Modification and Paintjob Pictures
Posted by Kid Flash on 18 June 2009 - 11:47 PM in Modifications
Anyways, I found a big blast at my local goodwill for 3 bucks. I couldn't pass that up. It now has an rscb clip that comes out of the side that has around a 1.5-2 inch cpvc barrel. I'm hoping to get some hornet tanks on this think to get rid of the dead space in the front of the gun where the original barrel used to be (If anyone knows how to rig the original hornet blast valve to some tanks can you pm me?). Here is my new monster:
Some full shots...
The part where it comes out the side, which as clean as it could ever be...
My cpvc nested in pvc barrel that I dremeled to be a funnel type of end so that it would load easier...
#137636 Modification and Paintjob Pictures
Posted by Kid Flash on 28 January 2008 - 04:03 PM in Modifications
#123426 Modification and Paintjob Pictures
Posted by Kid Flash on 18 September 2007 - 06:37 PM in Modifications
#144905 Modification and Paintjob Pictures
Posted by Kid Flash on 12 March 2008 - 07:09 PM in Modifications
#150521 Modification and Paintjob Pictures
Posted by Kid Flash on 11 April 2008 - 09:06 AM in Modifications
Im pretty sure nobody cares until you post the pictures. Id stop "reserving" spots if I was you.I did a custom Gold/Black mod for my Longshot. I will post pictures as soon as i can.
my singled 2k
i love spray foam!
#150561 Modification and Paintjob Pictures
Posted by Kid Flash on 11 April 2008 - 04:03 PM in Modifications
it used to fire small foam missiles that were lighter than nerf darts.What did the uzi used to fire? Or did it always fire darts?
my reactor
#159448 Modification and Paintjob Pictures
Posted by Kid Flash on 16 June 2008 - 09:25 PM in Modifications
#150526 Modification and Paintjob Pictures
Posted by Kid Flash on 11 April 2008 - 10:29 AM in Modifications
my dollar store uzi that gets about 30 feet with a nerf whistler/holwer/whatever its called.
#161608 Modification and Paintjob Pictures
Posted by Kid Flash on 05 July 2008 - 07:56 PM in Modifications
#162290 Modification and Paintjob Pictures
Posted by Kid Flash on 10 July 2008 - 07:12 PM in Modifications
EDIT: I need to clean my room...
#188894 Modification and Paintjob Pictures
Posted by Kid Flash on 10 November 2008 - 09:47 PM in Modifications
#209422 Modification and Paintjob Pictures
Posted by Kid Flash on 04 February 2009 - 11:13 AM in Modifications
My new gun... Not totally finished. I still have to add a keyring to the tank and make a cover for the hosing and tank out of pvc. Here it is now though. I call it MONSTER.
It uses an at2k shell, sm3k pump, super soaker pump handle, and a titan air tank. Just stuff I had laying around that my friend was curious as to why I hadn't done anything with. He told me to create a monster. In one of the pictures it shows a piece of a crayola around part of the hose. That was because the littleb screw on cap for the hose on the sm3k pump was cracked so I just used that to make it sturdier.
really sorry about the size... Fixing it now.
#123199 Modification and Paintjob Pictures
Posted by Kid Flash on 16 September 2007 - 12:32 PM in Modifications
my single minimized titan(yeah i know its not that minimized...)
#288297 Homemades Picture Thread
Posted by Kid Flash on 12 November 2010 - 02:51 AM in Homemades
#159933 Modifying A Longshot?
Posted by Kid Flash on 21 June 2008 - 05:56 PM in Modifications
#159891 Modifying A Longshot?
Posted by Kid Flash on 21 June 2008 - 06:34 AM in Modifications
#161065 Modifying A Longshot?
Posted by Kid Flash on 01 July 2008 - 08:41 AM in Modifications
#234718 Official "show-off Your Crossbow" Thread
Posted by Kid Flash on 06 June 2009 - 09:49 PM in Modifications
#163343 The Vulcan
Posted by Kid Flash on 19 July 2008 - 07:25 PM in General Nerf
#161120 The Vulcan
Posted by Kid Flash on 01 July 2008 - 04:56 PM in General Nerf
I find it easier to hold the longshot against my shoulder... It feels lighter because not all the weight is applied to just your hands.Point. But I forgot to mention that when weapons are heavy and unwieldy, it's nice to be able to rest them against something.
Last time I checked, gravity pulls stuff down not behind you. Unless you have a mutant arm specifically for stock holding, it wont matter.
- NerfHaven
- → Kid Flash's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·