Vassili's Content

#3703 Devil May Cry (1)

Posted by Vassili on 20 April 2003 - 03:27 PM in Off Topic

Anyone played this game before? It is so frickin cool. You walk around with swords, shotguns, and pistols and blow up evil spirit things. It's for PS2.

#2118 Kings Of Chaos

Posted by Vassili on 09 March 2003 - 09:25 PM in Off Topic

I think that the other thread about Kings of Chaos might tell you who does and that your link will be deleted once Cxwq or Vacc get here.

#26309 Expand A Blast Or Xbow Spring?

Posted by Vassili on 16 May 2004 - 12:04 PM in Modifications

The EaB spring is way too short for a Crossbow plunger, not even good enough for the EaB plunger in my opinion. Go to your local hardware store and find a much stronger replacement spring. You'll also want to reinforce the internals so your gun doesn't crack with the added pressure.

#5492 Foam Fortress Web Site Awards

Posted by Vassili on 09 June 2003 - 09:05 PM in Off Topic

Do you guys think it would be a good idea to have website awards for the Nerfing community? I was thinking:

Best Reviews
Best Mods
Best Homemades
Best H2H
Most Fun Forums
Best Technological Forum
Best New Site
Best Navigation
Best Design

And more.

Basically what would happen is I would take nominations for each category and then you could vote via email. Please no votes or nominations yet.

#9851 Anyone Have Pic Of Internals Of Sm 5000

Posted by Vassili on 17 September 2003 - 07:56 PM in General Nerf

NNL had pictures of unmodded Sm 5000 internals but it's not up anymore. The airtank goes up at the front of the gun, like right where the barrel is, and the rest you should be able to figure out form the pics on this site.

#25744 Sm3k Blue Mod Update

Posted by Vassili on 09 May 2004 - 06:27 PM in Modifications

You're hilarious.

#33655 Petg On Spring Guns?

Posted by Vassili on 10 August 2004 - 12:39 PM in Modifications

Unless you have relatively wide darts, then PETG wouldn't have enough friction to get very good ranges. You can try doing this to your barrel, but I would still reccomend telescoped brass.

#2015 Websites

Posted by Vassili on 04 March 2003 - 09:40 PM in Site Feedback

Which forum do things about nerf websites go? General?

#25463 Unnamed Eab Creation

Posted by Vassili on 03 May 2004 - 06:00 PM in Modifications

No, but judging by the fact that it outranged the farthest shot on my rifled PETG testing, I'd have to say more than 130 feet.

#25286 Unnamed Eab Creation

Posted by Vassili on 01 May 2004 - 12:23 AM in Modifications

Relocated the pump...

Posted Image

You can see in the third pic that I used a long, bendable brass sheet and formed it to the shell and pump, then wrapped the brass in extremely tight duct tape. That and the fact that the pump presses against a large section of the gun's shell make for an extremely sturdy pump. I think the gun also looks a lot better now, especially with the insulator padded foregrip. Thoughts?

#24773 Unnamed Eab Creation

Posted by Vassili on 24 April 2004 - 09:35 PM in Modifications

I finally decided to get off my lazy ass and finish one of my old projects. This gun has been made from scraps of many assorted things, but the valve is from a supersoaker (CPS 1000) and the pump is from a Larami 2000 (Sm5k lookalike). In case you were wondering the T-coupler on the back makes up most of the airtank. Range is very good, quite a distance past 100 feet, but the main thing I love is the velocity and accuracy. I have never seen another gun shoot with with the same velocity and accuracy as this one. ROF is also very good, thanks to the breach that I cut out of the shell. The only problem I have with this gun is that the pumping is a little awkward. Any input on where to relocate it is gratefully accepted. I couldn't stand the bright yellow pump handle, so that and the EaB trigger got painted black.

#10396 Ssii Mods?

Posted by Vassili on 25 September 2003 - 03:40 PM in Modifications

Self-Explanatory.

#2641 Modifications

Posted by Vassili on 24 March 2003 - 11:15 PM in Site Feedback

Cxwq's are the nicest mod writeups, mainly due to the fact that he is very skilled and has a very nice digital camera. There is also a new mod like every 2-3 weeks, which is a very good rate of improvement.

#10157 New Tt Mod

Posted by Vassili on 21 September 2003 - 07:32 PM in Modifications

You would get at least 5 more feet with a 17/32" section of brass, but nice job. You're right though, it badly needs a paint job.

#26625 Constricted Petg

Posted by Vassili on 20 May 2004 - 04:29 PM in Modifications

An idea I had a while ago, cut slits in PETG and wrap it tightly in electrical tape. With the ID of the PETG smaller, you can have a constricted section of the barrel that allows the air pressure in the plunger to build before firing the dart. I modded my Triple Shot and tested it with a normal PETG barrel and this barrel, and I definitely got improved results of about 5-10 feet. I encourage you to try this and see if you get similar results. I already wrote up a short Triple Shot mod and more details about the contricted barrel for NW, now we're just waiting for Grinch to post it. Feedback?

#26666 Constricted Petg

Posted by Vassili on 21 May 2004 - 09:10 AM in Modifications

My Triple Shot now gets 55' after I've gooped in the barrels. Maybe people have claimed better ranges, but if you look at Cxwq's First Shot Mod, someone who's results I trust on a gun with extremely similar, if not the same, plunger and spring, you'll see very similar results.

#25343 My Forum

Posted by Vassili on 01 May 2004 - 10:22 PM in Off Topic

It is crap, live with it.

#1579 Nerfhaven Rules

Posted by Vassili on 19 February 2003 - 12:45 AM in Site Feedback

I think NH is the best nerf forums + site in existence right now. I hope it continues to get better.

#11378 Spring For Eagle Eye

Posted by Vassili on 13 October 2003 - 07:30 PM in Modifications

No, the Eagle Eye didn't need a spring replacement, the spring was relatively strong, but if you want extra power you could find a better one. I just think a trusty secondary shouldn't be impossible to cock. FF seems to be working now.

#11476 Spring For Eagle Eye

Posted by Vassili on 15 October 2003 - 08:01 PM in Modifications

The best part about my mod is the fact that it is actually reduced to the size of a pistol. The only mods relating to the power of the gun is I lubed the plunger with vegetable oil, which really helped, and put on a nice telescoped brass barrel. If you really wanted to go all out you could widen the plunger and use like 1" PVC for the plunger tube, the shell is wide enough to do so.

#33301 Razor Fin?

Posted by Vassili on 06 August 2004 - 12:25 PM in General Nerf

...and the barrels are epoxied into the case.

No, they're not.

For some odd reason I actually tried to be helpful to this kid at NHQ:

"The Razor Fin has a tiny plunger tube, and the mechanism that switches the barrels greatly restricts the airflow. I doubt you can get more than 30-40 feet if you leave the barrel switching mech on, so I'd suggest ripping it off and single barreling it.

The problem with single barreling it though is that you'd have to connect the barrel to the plunger tube with some kind of tubing because otherwise the barrel will stick out of the top of the gun. Of course, by changing the airflow you will lose some pressure, which is already pretty abysmal. You'll also need to either replace the spring or add rubber bands because the stock spring is extremely weak.

Once that is all said and done, you'll have to deal with firing the gun with the weird trigger mechanism, and cocking it from the bottom of the handle, which is also quite inconvenient. All that work for a gun that can maybe get 45 feet on a good dart? Not worth it.

What I ended up doing with my Razor Fin was hacking off all of the gun except the handle, which held the plunger tube, and taping/glueing a crayola barrel directly onto the plunger tube. I had planned on integrating or somehow adding this little gun to one of my primary guns to act as a last-resort backup shot, but never got around to it.

In short, give up on your Razor Fin and dish out the 7 bucks needed for a NiteFinder." -Me at NHQ

I hope that answers your question if you should buy 'em or not.

#4487 Ff Is Finished!

Posted by Vassili on 12 May 2003 - 06:02 PM in Off Topic

I think we do need to move, we've passed our bandwith by 4 pm both days. Cxwq, we might be interested, I'll keep you posted.

#4465 Ff Is Finished!

Posted by Vassili on 11 May 2003 - 08:55 PM in Off Topic

Man, just when I thought Brinkster was perfect. I think switching to Web1000 is on our list sometime in the future, hell we might even buy a dot com.

#9853 Www.nerf.tk

Posted by Vassili on 17 September 2003 - 08:00 PM in General Nerf

Uh, Arcanis, I think that you're thinking he's giving away his site, but I'm pretty sure he's just giving away www.nerf.tk, which you can use as a cloak to just link to your site.

#3678 Weird Question

Posted by Vassili on 19 April 2003 - 06:54 PM in General Nerf

Thanks, whatever I have doesn't dry very hard.

#3675 Weird Question

Posted by Vassili on 19 April 2003 - 06:17 PM in General Nerf

Does hot glue dry harder when it's out of a high-temp hot glue gun or low-temp hot glue gun?

#2025 Big Huge Mod Dex

Posted by Vassili on 05 March 2003 - 07:55 PM in Off Topic

I just wanted everyone here to know that I released a mod dex on my site and it's a lot bigger than I would have suspected. Thanks again to Nerfhaven, Zero, Frost, and Atticus for being in it.

Linky

#3454 Eab Replacement Spring Not Working

Posted by Vassili on 14 April 2003 - 04:38 PM in Modifications

C-882 is what it says on mine, they work very well in Eabs, and SSIIs and probably more stuff I just haven't tested it in other guns.

#13809 Eab And Lnl...similarities?

Posted by Vassili on 06 December 2003 - 03:47 PM in Modifications

You guys hadn't noticed that? I thought that was kinda obvious.

#25647 Super Soaker Mod

Posted by Vassili on 06 May 2004 - 08:30 PM in Modifications

If you are going to actually leave the extremely large airtank, then yes I guess an XP gun would be more practical than a CPS gun but you're still talking about at least 30 pumps. However, if you are going to greatly reduce the air tank (which I highly reccomend), then a CPS valve would be just as good if not better than an XP valve.

#4064 Max Shot + At2k

Posted by Vassili on 27 April 2003 - 10:34 PM in Modifications

This is really simple, but is quite convenient and comfortable, and has two shots. The airtank is slightly to the left, on the bottom of the Max Shot right at the closest blue part to the trigger, with only the very back touching the black part in order to keep the barrel of the 2k level. A keyring glued to the valve pin is right near the Max Shot trigger, and you can comfortably put your index finger on the 2k valve and your middle finger on the Max Shot trigger. The pump is just taped onto the side, and as of right now you have to cradle it to pump, but soon I'll glue it. I don't have a good barrel for the 2k yet, but I'm expecting this gun to have a 90 foot shot and a 100 foot shot, very effective. Pics by next weekend. I really reccomend this to any MS owner, it's really easy, took me 5 minutes.

#4442 Max Shot + At2k

Posted by Vassili on 10 May 2003 - 05:39 PM in Modifications

I took pics but there on IronRhino's camera and he hasn't uploaded them yet.

*Cough* IronRhino *Cough*

Its already changed though, I replaced the tubing with 2 feet of vinyl tubing because I want like 120 foot ranges, even if it will be 6 or 7 pumps. I'm going to do a lot of cosmetics soon, too. I think I'll paint the blue part on the max shot black, red and black would be sweet.

edit:: Okay here they are:

Pic #1
Pic #2
Pic #3

We had bad light conditions but you get the picture.

#4453 Max Shot + At2k

Posted by Vassili on 11 May 2003 - 02:41 PM in Modifications

It won't be taped on for much longer and I definitely have to get another Max Shot that doesn't have anything on it. I also will add a stock soon, it kinda needs it since it jolts so much.

#25507 Small Soldiers

Posted by Vassili on 03 May 2004 - 11:04 PM in General Nerf

...The SM500, IMO, is the best Nerf sidearm you can get in power. Around 70' properly modded, if not, more.

Try an SS2 or SM750 if you think 70' is good for a sidearm. Still though, the SM500 is a very good gun, as with the small soldiers rifle. If you're up to it, I highly reccomend Cx's internal barrel mod

#6773 Help!exploding Air Tanks!

Posted by Vassili on 08 July 2003 - 09:59 PM in Homemades

We pump our homemades until you just simply can't pump anymore because you are not heavy enough to pump a bike pump. We get ours over 160.

#6690 Help!exploding Air Tanks!

Posted by Vassili on 07 July 2003 - 10:27 PM in Homemades

It's called PVC Cement, buddy. All you do is glue everything together.

#3965 Powerclip Rubber Banding

Posted by Vassili on 24 April 2003 - 10:45 PM in Modifications

Black Scout, what you probably did is put it back together wrong, where one of the tubes was bent too much, which meant not enough air could get to the piston and send it back and forth, only keep it forward. Also the piston could be off the little track it has.

What's better that rubber banding is bike tubing. Get a bike tube, cut like a 3 inch piece, and put it on the bladder. It definitely increases ROF, and I think there is a a little better range. I'm don't have enough time to go into detail, but unscrew the back of the bladder and take out all of the internals. Then slip the bike tube over the pump, piston, valves, and all that stuff and put it on the bladder. Trust me, it's a lot easier than dealing with the hose clamp. Just make sure you put all the tubing back in the right way.

Vassili's Content

By content type

See this member's

Sign In