Posted by Zorns Lemma on 02 April 2010 - 04:42 AM in Modifications

I have the raw of the firing video too but I probably won't find time to do it for ... ever.

Posted by Zorns Lemma on 23 February 2010 - 10:58 PM in Modifications

Longshot with full-length dart chamber:


Also, carbon-fiber reinforced boltsled and the brass breech is enclosed in the stock plastic one:


Raiders with full-length dart chamber:

9/16" main barrel:

17/32" main barrel:


Side by side, partially open (left is 9/16", right is 17/32", left one points up, right one points down)


With stefan drum mag (full breech means streamline drum works too)


⊂3

Posted by Zorns Lemma on 15 January 2010 - 04:55 AM in Modifications

Great work Ry and Zorn's.......

If these become popular, I see them as being the next widely banned item in the NIC---They are that good! 100', and 35 shots without reloading? The feed is actually very smooth---I emptied the drum several times without an issue. It's almost odd letting 35 continuous shots off without reloading......odd and awesome!

Posted by Zorns Lemma on 10 April 2010 - 06:25 AM in Modifications

Posted by Zorns Lemma on 13 April 2009 - 07:07 PM in Modifications

It works, at least indoors. People at ChANO can attest that the cold fucked with it massively. I'll probably semi-drop clip it later.



Internals. Molded a catch well out of putty.



Shell reinforcement, because the first time I put the spring in, the internals ripped themselves off of the walls. (Also, this way I can avoid having to adhere everything to the shell, and thus am able to open it and dick around with internals if needed).



Barrel replacement, with minimal removable of existing structure. It also centers the barrels much better. You might also notice a slight expansion of the rear air-holes.

Posted by Zorns Lemma on 11 September 2010 - 06:16 PM in Modifications

I call it the LAMB, since it is a meeker version of the LAB.

Writeup... maybe. The actual design is piss easy, but I took a bunch of shortcuts to save on machining (also because I used scrap parts) which might be worth sharing.

Posted by Zorns Lemma on 26 June 2010 - 12:23 AM in Modifications

ZOMG LATHES SO COOL

Posted by Zorns Lemma on 13 January 2010 - 09:14 AM in Modifications

Contract brass breeched raider. Breech is about 1/8" short of accepting stock length darts.

Ranges? Who knows. I just did the breech; client was responsible for actual internal mods.

Posted by Zorns Lemma on 05 June 2010 - 06:39 PM in Modifications

Because I like Zorn's penis in and around my mouth, may I introduce the completed Sylow Normalizer.

You should buy some kneepads. The cancer shack floor is pretty hard.

I added a (better) stock to mine. 3/4" PVC filled in with 1/2" PVC, 5/8"x1/2" Polyester, and 1/2" PVC rod to give maximal contact surface. Screwed/welded to a 1/8" PVC plate which is then welded to the firefly stock.



Added a raider stock to my man cannon to replace the old firefly stock



Introducing the Hausdorff-shot


Who needs to bother with centering couplers when you can find an oversized bushing?

Posted by Zorns Lemma on 05 May 2009 - 11:09 PM in Modifications

Posted by Zorns Lemma on 11 January 2010 - 06:26 PM in Modifications

Posted by Zorns Lemma on 24 May 2009 - 01:51 AM in Modifications

ChANO 2 saw 2 new guns, and as of this moment, my only assembled and working non-stock blasters:




BBB has a replaced plunger head, spring overhaul, and a bunch of internal reinforcements to handle the ~36 lbs of draw force. NF is fairly standard mods, with the exception of a 1/2" PVC coupler rather than CPVC coupler.

BBB linked breech is a fairly standard 17/32", 9/16", and 19/32" brass and 1/2" SH40 PVC slide-breech with PVC tee to CPVC elbow. Around the dart slot area, I have the 1/2" PVC cut to fit the clip similar to the ones HeretiCorp was selling a while ago, and around that is 3/4" SDR 200 PVC to stabilize the LS/recon mags.



Fairly simple, as I whipped both guns together in around 4 hours from 1 AM to 5 AM the night before/day of the war.

Posted by Zorns Lemma on 05 December 2009 - 07:54 AM in Modifications

The Sylow Conjugator



Bike pump. Same pressure as old pump, but in 1/3 as many pumps.



Shotgun attachment. 1/2" PVC stub in a 1-1/2" to 1/2" PVC slip bushing in a cut down 1-1/2" PVC coupler. Fits into any 1/2" coupler to adapt it to 1.5" PVC shells. 4" shells with 4 CPVC barrels.
Here's a spacer template:

I'm sure I could fit in 6 or 7 PETG barrels, but PETG doesn't fit my darts and brass is expensive. 4 is plenty anyways.



Super internals. 3/4" to 1/2" PVC slip bushing solvent-welded to tank. Epoxy putty on the shell around the bushing for more support and to take stress. External tubing in case I ever add a hard tank (also for the external OPRV). Tubing is put into both the bike pump and tank through superglue + solvent weld + goop (let set/cure at each stage).



1/8" PVC sheet + ABS/PVC cement + epoxy putty = invincible trigger.

Posted by Zorns Lemma on 04 August 2011 - 09:50 AM in Homemades

Some pictures of the sealing mechanism/pump face:




OMG I PUT A HANDLE ON IT

Posted by Zorns Lemma on 09 December 2011 - 01:41 PM in Homemades

Suboptimus primary
Built on the fallopian rev 2 platform



It's like Christimas

Posted by Zorns Lemma on 07 March 2013 - 12:22 AM in Homemades

http://www.mcmaster....lyethylene-tape

This stuff is amazing. It lets you take a bunch of does-not-fit tubes and makes them into slides-super-well tubes.

Posted by Zorns Lemma on 08 March 2013 - 12:51 AM in Homemades

Posted by Zorns Lemma on 14 July 2011 - 10:43 PM in Homemades

Posted by Zorns Lemma on 31 May 2012 - 11:11 PM in Homemades

Posted by Zorns Lemma on 26 February 2013 - 08:38 PM in Homemades

Found some magical 1.5"x1.33" nylon tube, which fits inside 1.75"x1.5" polycarb tube, allowing me to snugly convert 1" PVC OD (1.315") to 1.5" SDR 35 PVC ID (~1.74").



Priming action now super smooth from the pump grip part — just need to redo the catch plate now

Posted by Zorns Lemma on 18 January 2013 - 12:18 AM in Homemades

Did some QoL improvements:

Posted by Zorns Lemma on 27 January 2013 - 12:11 PM in Homemades

Fixed the torque problems on my lever trigger

Posted by Zorns Lemma on 21 December 2012 - 12:17 AM in Homemades

30" including barrel.

Posted by Zorns Lemma on 25 June 2011 - 12:31 PM in Homemades

Needs a handle. Or I can wield it hamp-style.

Posted by Zorns Lemma on 15 November 2012 - 11:43 PM in Homemades

Plunger:



Pump:

Posted by Zorns Lemma on 16 February 2013 - 12:01 AM in Homemades

Secured the front of my blaster with maple syrup 3D printed brackets

Posted by Zorns Lemma on 06 July 2010 - 05:10 PM in Homemades

ZOMG







ZOMG ZOMG

Posted by Zorns Lemma on 19 December 2009 - 01:34 AM in Homemades

Mod party, yay! Or in the eyes of some people, dick-waving time.

One of Zorn's contracts. 3B, homemade internals.

Posted by Zorns Lemma on 27 February 2010 - 05:53 PM in Homemades

New style raider drum. Installed on a longshot it faces forward and swings to the right.






I'll get around to the write-up someday...

Posted by Zorns Lemma on 23 February 2010 - 10:42 PM in Homemades

Raider drum with reversed orientation (on the right)


Xbow internals

Posted by Zorns Lemma on 06 February 2010 - 06:44 PM in Homemades

Posted by Zorns Lemma on 10 January 2010 - 07:43 PM in Homemades

Mod party, yay! Or in the eyes of some people, dick-waving time.

One of Zorn's contracts. 3B, homemade internals.

It shoots (awesome) now, but I need to put some finishing touches on it and some small quality-of-life and make-sure-gun-doesn't-explode tweaks.

Posted by Zorns Lemma on 14 March 2010 - 07:58 AM in Homemades

How to do a real PullAS, the P-AS:




See more here: http://blog.unholy3....10/03/p-as.html

Posted by Zorns Lemma on 14 March 2010 - 03:49 PM in Homemades

Posted by Zorns Lemma on 23 June 2010 - 03:00 AM in Homemades

Posted by Zorns Lemma on 20 April 2009 - 04:40 AM in Homemades

Finished up the first of a bunch of commissions.

Slide breech for a PAS. 12" 9/16 barrel (11.75" of real barrel, due to .25" of dart stop) nested in 19/32" brass with 1" male stub for nesting into internal PVC or 5/8" brass and 2" dart slot.








2 check valves. Nothing special here. Client has yet to specify open tubing or built-in barbed connectors, so it is open tubing for now.



A 2-step trigger (different client) is currently curing. Will do a battery of tests and, barring any problems, ship it out in the morning.

Posted by Zorns Lemma on 23 June 2010 - 02:00 AM in Homemades

Lathes are awesome.

Made myself the most comfortable foregrip ever, and it uses 1/2" PVC connectors rather than airsoft rails.



OH MAH GOD WHAT COULD IT BE?


P.s. fuck CAD and printing templates. Ruler+compass+scanner (maybe a dash of calipers and protractor) is way faster/easier.

Posted by Zorns Lemma on 05 June 2010 - 06:43 PM in Homemades

Worked on my not-a-+bow.


Molded 1/8" PVC back plate mounted on pieces of 1/4" for support. Inspired by JLego's +bow and Hipponater's work on Beaver's +bow.


Screwed on an actual cheek plate.


Plasti-dip handle


Suboptimal!

Posted by Zorns Lemma on 05 December 2009 - 07:11 AM in Homemades

Yo I like BBBs


And I want to make them shoot more than your penis gun

Posted by Zorns Lemma on 06 May 2011 - 10:01 PM in Homemades

zomg buttsex party