- NerfHaven
- → noahback's Content
noahback's Content
There have been 12 items by noahback (Search limited from 13-May 97)
#364622 Nerf Longshot feeding issue
Posted by noahback on 27 December 2020 - 11:28 AM in Modifications
#363798 Longshot Brass Breech Problems
Posted by noahback on 14 April 2019 - 07:27 AM in Modifications
How long is the barrel with an 8kg you probably only need like 5 inches maybe a little less. Other than that i would say the breach doesn't seal or the barrel isn't far enough into the breach to seal or gets pushed back.
#363637 Any help is good help.
Posted by noahback on 09 January 2019 - 08:33 PM in Modifications
Try taking a picture showing how you are trying to assemble the blaster. And then I or some of the other modders may be able to identify your problem. Before you do that look at a picture of the mega cycloneshocks internals and see if you can figure out the problem.
#363604 Understanding batteries?
Posted by noahback on 02 January 2019 - 11:47 AM in Modifications
A 3s 1000 mAh lipo is like 15$ 4 imrs can be bought for like 10$ and have 14.8 volts but must draw more than rated current to run stock motors. If you plan on upgrading motors go lipo if you are just going to use stock motors use imrs for cheaper and better gains. If you use imrs in upgraded motors you will destroy them.
#363598 Desolater thermistor fry
Posted by noahback on 29 December 2018 - 08:08 PM in Modifications
ops figured out i just need to put a wire across yet can't seem to delete post.
#363597 Desolater thermistor fry
Posted by noahback on 29 December 2018 - 06:37 PM in Modifications
I'm tried to put solder over the connections where the thermistor was after removing the thermistor to no avail. The spots with the least amount of solder are the ones are where the thermistor was.
#363540 Am imr my evader wonder if their is anything else i should do to it in
Posted by noahback on 02 December 2018 - 03:48 PM in Modifications
How many fps will taking out the thermistor give me?
#363483 Brushless Nerf Nemesis
Posted by noahback on 13 November 2018 - 09:45 AM in Modifications
I've heard coop say he hit around 130 fps with stock wheels and motors with a rewire and a 3s.
#363449 Springers or Flywheels?
Posted by noahback on 29 October 2018 - 02:48 PM in General Nerf
Inside flywheels all year long. Outside most strye/flwheel mods only get 140 maybe 150 fps (except fdl which shots about 180, but it costs 300 to 400$ so it is not viable for most) so itcan't compete for range and theyare usually less accurate. Indoors I probably drop 25 bullets around with my imred stryfe (house is not large enough to where lipos would significanly effect play) playing with 2 people with 3 lives each where with a caliburn playing outdoors I could never see using more than 1 mag maybe a round with the same rules at father ranges. Loding mad is just a pian my recomendation for outdoor play sling a stryfe incase some gets close and use an accurate 200-250 fps springer for primary will save lots of mag loading time. (In stock nerf though always flywheels)
#363420 Am imr my evader wonder if their is anything else i should do to it in
Posted by noahback on 18 October 2018 - 05:03 PM in Modifications
thanks i got an imr with a safety circuit and am going to replace the safety circuit, would have gone lipo but with cage fang revamped and batterry it was around 60$. if i does happen to break it I woukd just go lipo by the time i had to rewire.
#363416 Am imr my evader wonder if their is anything else i should do to it in
Posted by noahback on 18 October 2018 - 10:05 AM in Modifications
I have an evader that i ordered imrs and dummies for that i am going to mod but don't know what to do about a few things. First it won't rev unless a mag is in it if i take out the button that the mag presses. If i take the button out but not the circuit will it still rev? Any other small mods i should do to it that only cost a few bucks to nothing.
(ps. I don't want this to become a war on imr vs lipo i looked at a nice lipo setup that was around 60$ but none of my friends mod so having that much power is pointless. Also I know i have to remove thermistor and have the equipment)
- NerfHaven
- → noahback's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·