- NerfHaven
- → Quilan Fett's Content
Quilan Fett's Content
There have been 640 items by Quilan Fett (Search limited from 13-May 97)
#146592 Cpvc At3k Problem
Posted by Quilan Fett on 24 March 2008 - 12:57 PM in Modifications
#190343 Pump Action Rifle
Posted by Quilan Fett on 17 November 2008 - 08:07 PM in Homemades
The back to the plunger tube is unnecessary.
Instead of working for a seal between the plunger tube and breech/barrel, connect them and have a moving plunger tube.
For the breech, I'd just do a simple one and forget about a clip. They are too hard to get working right and their jamming overshadows their speed.
#186327 My Unfinished Longshot
Posted by Quilan Fett on 29 October 2008 - 07:42 PM in Modifications
Also, you can't test range by shooting at a wall 10 feet away.
#134296 Where Do I Get Springs?
Posted by Quilan Fett on 29 December 2007 - 12:34 PM in General Nerf
#214644 Switch Shot Question
Posted by Quilan Fett on 24 February 2009 - 10:39 AM in General Nerf
#136354 Cliped Bbb Isues
Posted by Quilan Fett on 18 January 2008 - 09:57 AM in Modifications
#206385 Question About Common Breech
Posted by Quilan Fett on 25 January 2009 - 07:06 PM in Homemades
#146825 Arrow Storm?
Posted by Quilan Fett on 25 March 2008 - 11:53 AM in General Nerf
#105143 Sonic Bazooka?
Posted by Quilan Fett on 12 May 2007 - 03:29 PM in General Nerf
Don't you mean:LBB>LSB
BB>LBB
LBB>LSB
BBB>LBB?
BB=Blast Bazooka.
#147480 I Just Found Some Dirt
Posted by Quilan Fett on 28 March 2008 - 12:23 PM in Off Topic
#147595 I Just Found Some Dirt
Posted by Quilan Fett on 28 March 2008 - 09:14 PM in Off Topic
#147478 I Just Found Some Dirt
Posted by Quilan Fett on 28 March 2008 - 12:08 PM in Off Topic
http://209.85.173.10...lnk&cd=21&gl=us
#147021 Suggestions Welcome
Posted by Quilan Fett on 26 March 2008 - 12:19 AM in Modifications
#146965 Suggestions Welcome
Posted by Quilan Fett on 25 March 2008 - 08:10 PM in Modifications
#143782 Pants
Posted by Quilan Fett on 04 March 2008 - 12:10 AM in Homemades
#127729 Gun Identification
Posted by Quilan Fett on 27 October 2007 - 08:17 PM in General Nerf
#212851 Snap Shotgun
Posted by Quilan Fett on 16 February 2009 - 06:35 PM in Homemades
I think this will describe it better than 5 paragraphs and be easier to read:
1.25" PVC Body.
Plunger tube is 1" Thinwall PVC
Brass breech is connected to plunger tube
CPVC barrel is stationary
Plunger moves back to prime
Opening in brass is exposed when the plunger is back
Dart is pushed into CPVC barrel by tighter CPVC behind it when plunger tube moves forward
Clothespin trigger
Key features:
Almost perfect seal (Plunger looses a bit of air but moves faster to compensate)
Unlike previous SNAP variants, trigger is easy to pull (Leverage)
Almost no dead space. Dart loads 0-1" from the plunger head's resting position.
Plunger is lighter than PVC (From bike pump)
Dart is pushed into barrel like angel breech, so loading multiple darts is easy
Removeable stock
Comfy
And the moment you've all been waiting for...
Ranges: Good.
Yeah, I know, kind of a letdown, but everyone measures differently. Plus, after a certain point it doesn't matter anymore. You're not going to have a showdown with someone from 100 feet away. It hits hard at 70' and that's enough for me.
Notes:
I still need to cut a larger hole for dart loading, but my dremel stopped working and I haven't ordered a new one yet.
The two couplers in the front are because I cut the body too short.
Any questions? I know this is brief and lacking in details, since there are so many to list, but I'd be happy to provide any there are interest for.
#212868 Snap Shotgun
Posted by Quilan Fett on 16 February 2009 - 07:24 PM in Homemades
Thanks.I love it. Very nice work on the breech system.
The thing about the leverage with the trigger is that, though it's easier to pull, you have to pull for a longer distance. Which is personal preference. I for one, and I know Vacc is like this as well, prefer a "hair trigger", even if it means a tough pull.
As for showdowns at 100 feet, +pistol.
With the breech though, you could effectively shotgun load, in the same manner that my thundersplat did? Very nice.
The trigger pull isn't that long, but now that you mention it, I do like a longer pull.
And yes, the breech works in the same manner as your thundersplat.
#212959 Snap Shotgun
Posted by Quilan Fett on 17 February 2009 - 12:02 AM in Homemades
Funny you said that. I always loved my singled RFS but it always broke. This is it's replacement.Dang, its like a homemade, breeched, PAS.
Excellent work.
My next job is to make it beautiful. Gotta get some Vinyl dye.
#113348 Problems With A Firefly
Posted by Quilan Fett on 27 June 2007 - 06:31 PM in Modifications
#208370 Broken Magstrike
Posted by Quilan Fett on 31 January 2009 - 07:51 PM in Homemades
#186910 Buzz Bee Double Shot Problems!
Posted by Quilan Fett on 01 November 2008 - 08:10 PM in Modifications
To answer your question, if it is broken, it is probabally not worth fixing. I was in a similar situation, so believe me. The cost of materials and/or work involved in fixing it would be greater than just buying a new one and working a few hours at minimum wage to pay for it.
#152045 3rd Spy Gear Signal Launcher Mod
Posted by Quilan Fett on 19 April 2008 - 04:15 PM in Modifications
#195057 Scar-n In Clear Vision
Posted by Quilan Fett on 09 December 2008 - 07:31 PM in General Nerf
#208368 Broken Magstrike
Posted by Quilan Fett on 31 January 2009 - 07:44 PM in Homemades
#152212 Cutting Down A Ls
Posted by Quilan Fett on 20 April 2008 - 04:14 PM in Modifications
#146904 Homemade Idea
Posted by Quilan Fett on 25 March 2008 - 05:27 PM in Homemades
#110294 Petg Seal
Posted by Quilan Fett on 09 June 2007 - 07:44 PM in General Nerf
#117337 Dtg And At3k Problems
Posted by Quilan Fett on 27 July 2007 - 12:34 PM in General Nerf
Captain slug used the same spring on his DTB as his NF. That's how he got the great ranges. The same thing happened to me.Yea, I'm thinking of that, but I don't want to go too powerful, because the DTG cocking mechs aren't that strong... The DTG spring should be able to produce 50'.
As for the DTB spring, it is very weak. People mut it in their mavs.
#107989 Petg Seal
Posted by Quilan Fett on 28 May 2007 - 03:58 PM in General Nerf
#107987 Longshot Parts
Posted by Quilan Fett on 28 May 2007 - 03:55 PM in General Nerf
What peice do you need. Captain Slug is selling off all the internals of one of his LongShots.For the last couple weeks, I have been working on the Angel Breech for my longshot. Had it finished and was happy with it, until I realized that it needed one more minor adjustment. Took it apart, and while I was fixing it, the piece vital to the gun broke for the second time. Having this break, along with many other frustrations along the way has made me throw this project away in disgust.
So now I am considering using some of the parts of the gun (BBB spring, longshot spring, brass, plunger, etc) for other modifications. I'm not going to say this for definite, as I am guessing there are people that might want to buy the spare parts, but I'll think on it until I calm down a bit from this project.
The big question I want to ask is what guns can easily accept the longshot and BBB spring, and would be worth it to go and buy, mod, etc. Ive heard the crossbow is great, but hard to find and expensive. What other guns might be good?
#107937 Petg Seal
Posted by Quilan Fett on 28 May 2007 - 11:16 AM in General Nerf
#121002 Interesting Gun
Posted by Quilan Fett on 24 August 2007 - 02:39 PM in General Nerf
#122043 Interesting Gun
Posted by Quilan Fett on 03 September 2007 - 06:14 PM in General Nerf
http://yakotoys.en.a...UN/showimg.html
#145867 Bbb Coupler'd Pvc Barrel And A Spring Shortener Or Something
Posted by Quilan Fett on 19 March 2008 - 07:54 PM in Modifications
#147646 Got 2 New Nerf Guns Today
Posted by Quilan Fett on 28 March 2008 - 11:09 PM in General Nerf
#124853 Holy Shit... Anyone Ever See This?
Posted by Quilan Fett on 02 October 2007 - 09:52 PM in General Nerf
#124154 An Idea To Integrate To Big Bad Bow
Posted by Quilan Fett on 25 September 2007 - 07:18 PM in Modifications
#122053 Interesting Gun
Posted by Quilan Fett on 03 September 2007 - 07:50 PM in General Nerf
#147827 My Review Of The Airzone Crossbow
Posted by Quilan Fett on 29 March 2008 - 06:27 PM in General Nerf
http://nerfhaven.com...showtopic=10129
http://nerfhaven.com...topic=9216&st=0
Also, DON'T CUT THE STRING IN THE BARREL. It is the bungee that powers the gun.
- NerfHaven
- → Quilan Fett's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·