- NerfHaven
- → Quilan Fett's Content
Quilan Fett's Content
There have been 640 items by Quilan Fett (Search limited from 13-May 97)
#159712 Longshot Troubles
Posted by Quilan Fett on 19 June 2008 - 11:25 AM in Modifications
#162333 Two Questions About Homemades
Posted by Quilan Fett on 11 July 2008 - 12:50 AM in Homemades
#151352 Magstrike Problem
Posted by Quilan Fett on 15 April 2008 - 08:39 PM in Modifications
#148933 Well, April 1st Has Come And Gone?
Posted by Quilan Fett on 02 April 2008 - 08:03 PM in Off Topic
I missed your x-bow thread, but I had planned to do the same with a SuperTech 9000. I chickened out because I figured I'd get banned.
#147602 What Parts From A Maverick?
Posted by Quilan Fett on 28 March 2008 - 09:29 PM in General Nerf
#176559 +bow Addition
Posted by Quilan Fett on 11 September 2008 - 09:11 AM in Modifications
#166695 National Geographic Gun Problems
Posted by Quilan Fett on 05 August 2008 - 12:40 AM in Modifications
#212860 Ebay Question
Posted by Quilan Fett on 16 February 2009 - 06:56 PM in Off Topic
If you don't let e-bay send you any credit card numbers or paypal passwords (Not sure if this is possible (I don't use e-bay)), you should be fine.
#212049 Night Finder
Posted by Quilan Fett on 13 February 2009 - 06:30 PM in Site Feedback
#202891 Expanding Brass Half-pipes
Posted by Quilan Fett on 12 January 2009 - 06:41 PM in Modifications
I used a standard non-reinforced and it cut fine. By the time I was done with the breech, the wheel was the size of a mini-marshmallow though.I usually use a dremel with a cutting wheel to cut it.
What cutting wheel are you using? If it is a wood/plastic, tile, anything other than a thincut metal wheel, you WILL have these problems. If it is, then the brass may be bad. Get it from Hobby People, they have wonderful brass.
#213820 Roto Rocket Mod
Posted by Quilan Fett on 20 February 2009 - 10:26 PM in Modifications
#214300 Snowskate Help
Posted by Quilan Fett on 22 February 2009 - 08:39 PM in Off Topic
#149598 Plunger Tubes
Posted by Quilan Fett on 06 April 2008 - 01:00 AM in Modifications
#151335 Firefly Shotgun
Posted by Quilan Fett on 15 April 2008 - 08:00 PM in Modifications
#149575 Plunger Tubes
Posted by Quilan Fett on 05 April 2008 - 10:41 PM in Modifications
#156234 The Latest From N-strike: Coming Fall 2008
Posted by Quilan Fett on 19 May 2008 - 01:00 AM in General Nerf
#197031 Spring Replacment
Posted by Quilan Fett on 18 December 2008 - 07:12 PM in Modifications
#146486 Missing Nf Catch Spring
Posted by Quilan Fett on 23 March 2008 - 06:46 PM in General Nerf
#159901 Morg Writeup
Posted by Quilan Fett on 21 June 2008 - 11:25 AM in Homemades
#190614 Rapid Fire 20 Question
Posted by Quilan Fett on 18 November 2008 - 08:44 PM in General Nerf
The material of the bladder itself is rated to 500PSI. The Nylon fittings however are rated to 150PSI. The stock pump can only fill the stock bladder to about 60PSI.
The points of failure involved are the end caps of the bladder not being secure, or using a hose clamp without padding, causing it to cut into the bladder.
Also, FA24 pumped his 80 times:
http://nerfhaven.com...indpost&p=91496
#145947 Newbie Needs Help
Posted by Quilan Fett on 20 March 2008 - 09:26 AM in Modifications
#107434 Nite Finder Mod Messed Up
Posted by Quilan Fett on 24 May 2007 - 06:14 PM in Modifications
PVC is also too big for 1/2 in stefans.OK, i think i'm going to ditch that barrel and get a pvc.
(now i just gotta remove about 3 sticks of hot glue from my nite finder
#107419 Can This Be Modded?
Posted by Quilan Fett on 24 May 2007 - 05:00 PM in General Nerf
This once got me banned from a war.I can get it too go over 50' easy. One missile topped over 60'.
So it's medium-ranged crap. Why not just carry a chimp to throw its own shit at your opponents then?
#128417 Homemade Gun Shells
Posted by Quilan Fett on 03 November 2007 - 12:36 PM in Homemades
#124195 Extended Rfr/clip Tek Clip?
Posted by Quilan Fett on 26 September 2007 - 04:18 PM in Modifications
#115273 Power Trip
Posted by Quilan Fett on 10 July 2007 - 03:29 PM in Articles
Can you tell us what a rocket man shooter is?That being said, these powerful weapons can give you the upper hand in a long range fight without hurting anyone. At the war on Saturday, a titan, sm5k, and my rocket man shooter were all used.
#107438 Nite Finder Mod Messed Up
Posted by Quilan Fett on 24 May 2007 - 06:35 PM in Modifications
#135343 Fun Free Online Games
Posted by Quilan Fett on 08 January 2008 - 10:58 PM in Off Topic
#138375 How Many Times Have You Been Sigged?
Posted by Quilan Fett on 03 February 2008 - 12:05 PM in Off Topic
#145327 Maxshot Questions...
Posted by Quilan Fett on 15 March 2008 - 11:44 PM in Modifications
#145870 What's This?
Posted by Quilan Fett on 19 March 2008 - 08:10 PM in General Nerf
#145173 Who Has Some Money They Want To Blow?
Posted by Quilan Fett on 14 March 2008 - 11:18 PM in General Nerf
#144922 Plunger Tubes
Posted by Quilan Fett on 12 March 2008 - 08:52 PM in Homemades
#142072 Morg Writeup
Posted by Quilan Fett on 22 February 2008 - 10:31 PM in Homemades
Ranges-
- 35
- 42
- 60
- 61
- 62
- 65
- 45
- 50
- 67
- 68
- 69
- 69
Without further adoo-
MORG
The gun itself
Uncocked
Cocked
The Trigger
Uncocked
Cocked
Breech partway open
Size comparison
Specs
Description............Multi Shot Primary
Designation..........................MORG!
Release Date.....................Jan 2008
Caliber..............0.54" (Micro Stefans)
Operation...............Pull-Push Foregrip
Propulsion...................Spring Plunger
Magazine............Detachable Top Feed
Mag Capacity................................6
Overall Length.......................25.5 in
Weigh.....................................2.3lb
Barrel Length...........................14 in
Max Rate of Fire.........................N/A
Max Range.................................70'
Effective Range...........................55'
Accurate Range...........................40'
Intended Use........................Primary
Materials:
For Plunger
- 1' 1.25" PVC
- 1x Clothespin
- 1x Nail (for trigger)
- 2x 1.25" PVC coupler
- 2x 1.25" to .5" PVC reducing bushing
- 1x Angle bracket (for trigger)
- 1' 1" PVC (for spring guide)
- 1x .75" PVC endcap
- .5' .75" PVC
- 2x Handyman 9713 Spring
- 1x .75" to .5" PVC reducing bushing
- 1x .5" CPVC endcap or coupler
- 1' .5" PVC
- 1' 19/32" Brass
- 11" 9/16 PETG (lengthen for dart tightness)
- 1x .5 PVC tee
- 2' Threaded metal rod
- 4x Nuts to go on rod
- 2x Angle brackets to go on rod
- .5' 1/2" Brass
- 1x Rightguard gel deoderant stick
- 1x Dead 9v battery
- 1' 1" PVC (for handle)
- 1x .75" PVC coupler
- .5' .75" PVC
- Epoxy Putty
- Plumber's Goop
- Wire cutters
- Hacksaw/PVC cutters
- PVC cement
- Hammer
- Complex $50,000 specialty machine that no one actually owns
http://www.boltsnipe...ap-1/SNAP1.html
- I used a O-ring plunger instead of a washer. Though the linked wirte-up is made for thinwall 1' PVC, it is pretty similar.
<a href="http://nerfhaven.com...showtopic=6934" target="_blank">http://nerfhaven.com...wtopic=6934</a> - I used a 3" CPVC plunger rod. The spring fits well over it.
- I used a small peice of 1' PVC to support the spring. It fits in the back of the plunger tube and is just short enough not to interfere with the plunger.
- I put a coupler and 1.25"-.5" PVC reducing bushing on the front and back. If you want a cleaner look, you can put an endcap on the back, but you will loose the ability to attach a stock. Note:don't glue the front reducer on yet
- For the plunger head assembly, put the o-ring in a slot in the .75" PVC endcap. Inside of the endcap, put the .75" to .5" PVC reducing bushing. Inside this, place the CPVC fitting with the CPVC inside it. You will then need to sand down the endcap and bushing to let the nail reach the catch slot.
To start, take the front 1.25" to .5" PVC reducing bushing and glue half of the .75" PVC coupler in the inside of it with the loose end facing away from the .5" side. Now cut a 1" peice of .75" PVC. Next, cut a 5.5" peice of 19/32" brass. Glue a 5" peice of 1/2" brass inside it. Glue the end of the brass with the glue in it in the peice of .75" PVC that you just cut and put it in the gun with the brass sticking out of the front bushing. I also recomend gluing some FBR onto the peice of .75" PVC to help silence the gun.
Cut a 4.25" Peice of .5" PVC. Now, glue one end into your .5" PVC tee. Now, using FA_24's guide, put the deoderant clip as close to the tee as you can.
When making your clip, keep the peice that attaches to the screwey part that pushes the gell down. Sand this peice dawn so that it slides easialy in the clip and use it as your feeder (peice that pushes darts down). Put your 9v battery on top of it to weigh it down.
Note: this is the time at which you will have the choice to make a foregrip (like I did) or a side bolt (like the Longshot). For the foregrip, put your clip on opposite the tee. For a side bolt, put the clip on perpendicular to the tee.
Clip write-up
http://nerfhaven.com...showtopic=6370=
Once the clip is done, glue the 19/32" brass in the .5" PVC just behind where the dart will load and on the side without the tee.
The clip
You are almost done.
Next, take your peice of PETG and put it in the brass. Now hold it still and cock your gun. Mark where the dart will load once it is fully cocked and cut the breech opening. Make sure that the brass sufficently covers the opening when it is in the forward position.
Now, drill two holes in your front reducing bushing the size of your metal rods. Screw the rods into the holes you just made. Now screw two nuts, a bracket, then two more nuts onto each rod on the end. Make sure that the PETG barrel in place so that it is open when the priming handle is back and covered when the priming handle is forward and glue it onto the angle brackets.
Other Construction Specs
- Length of 1.25" PVC with both couplers glued on - 12" exactly
- Distance from end of front 1.25" coupler to trigger catch - 6.5"
- Ammount of hot glue used - 20lbs
#142091 Morg Writeup
Posted by Quilan Fett on 23 February 2008 - 12:00 AM in Homemades
Also, for all who were wondering, Mead Me Homy Fern Gnu is an anagram for "My homemade nerf gun". Also possible, "Famed Gunnery Eh Mom", "My Foamed Gunner Hem", "Famed Rogue Men Hymn", "Deaf Gunner Eh Mommy", and "Fanged Her One Mummy"
If you are still confused, a gnu is a wildebeest, so Mead me homy fern gnu basically means, "meet me homie fern wildebeast".
#109467 Copper Barrel / Cpvc Coupler
Posted by Quilan Fett on 04 June 2007 - 09:58 PM in Modifications
#130651 Stock Streamlines = Major Range
Posted by Quilan Fett on 25 November 2007 - 05:48 PM in General Nerf
#104016 Nano Stefans
Posted by Quilan Fett on 05 May 2007 - 09:59 AM in General Nerf
#128487 Well... I Need Some Suggestions
Posted by Quilan Fett on 03 November 2007 - 08:03 PM in Modifications
#116798 What Gun Is This?
Posted by Quilan Fett on 22 July 2007 - 04:46 PM in General Nerf
http://www.pwpaintba...istol_splat.htmIt's called a Pistol Splat. I don't know where you can find them though. But it is indeed a paintball gun without co2.
- NerfHaven
- → Quilan Fett's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·