- NerfHaven
- → Zorns Lemma's Content
Zorns Lemma's Content
There have been 1000 items by Zorns Lemma (Search limited from 09-May 97)
#271061 Modification and Paintjob Pictures
Posted by Zorns Lemma on 02 April 2010 - 04:42 AM in Modifications
I have the raw of the firing video too but I probably won't find time to do it for ... ever.
#266697 Modification and Paintjob Pictures
Posted by Zorns Lemma on 23 February 2010 - 10:58 PM in Modifications
Also, carbon-fiber reinforced boltsled and the brass breech is enclosed in the stock plastic one:
Raiders with full-length dart chamber:
9/16" main barrel:
17/32" main barrel:
Side by side, partially open (left is 9/16", right is 17/32", left one points up, right one points down)
With stefan drum mag (full breech means streamline drum works too)
⊂3
#261894 Modification and Paintjob Pictures
Posted by Zorns Lemma on 15 January 2010 - 04:55 AM in Modifications
Great work Ry and Zorn's.......
If these become popular, I see them as being the next widely banned item in the NIC---They are that good! 100', and 35 shots without reloading? The feed is actually very smooth---I emptied the drum several times without an issue. It's almost odd letting 35 continuous shots off without reloading......odd and awesome!
#271786 Modification and Paintjob Pictures
Posted by Zorns Lemma on 10 April 2010 - 06:25 AM in Modifications
#223445 Modification and Paintjob Pictures
Posted by Zorns Lemma on 13 April 2009 - 07:07 PM in Modifications
It works, at least indoors. People at ChANO can attest that the cold fucked with it massively. I'll probably semi-drop clip it later.
Internals. Molded a catch well out of putty.
Shell reinforcement, because the first time I put the spring in, the internals ripped themselves off of the walls. (Also, this way I can avoid having to adhere everything to the shell, and thus am able to open it and dick around with internals if needed).
Barrel replacement, with minimal removable of existing structure. It also centers the barrels much better. You might also notice a slight expansion of the rear air-holes.
#285288 Modification and Paintjob Pictures
Posted by Zorns Lemma on 11 September 2010 - 06:16 PM in Modifications
I call it the LAMB, since it is a meeker version of the LAB.
Writeup... maybe. The actual design is piss easy, but I took a bunch of shortcuts to save on machining (also because I used scrap parts) which might be worth sharing.
#278595 Modification and Paintjob Pictures
Posted by Zorns Lemma on 26 June 2010 - 12:23 AM in Modifications
ZOMG LATHES SO COOL
#261662 Modification and Paintjob Pictures
Posted by Zorns Lemma on 13 January 2010 - 09:14 AM in Modifications
Contract brass breeched raider. Breech is about 1/8" short of accepting stock length darts.
Ranges? Who knows. I just did the breech; client was responsible for actual internal mods.
#276909 Modification and Paintjob Pictures
Posted by Zorns Lemma on 05 June 2010 - 06:39 PM in Modifications
Because I like Zorn's penis in and around my mouth, may I introduce the completed Sylow Normalizer.
You should buy some kneepads. The cancer shack floor is pretty hard.
I added a (better) stock to mine. 3/4" PVC filled in with 1/2" PVC, 5/8"x1/2" Polyester, and 1/2" PVC rod to give maximal contact surface. Screwed/welded to a 1/8" PVC plate which is then welded to the firefly stock.
Added a raider stock to my man cannon to replace the old firefly stock
Introducing the Hausdorff-shot
Who needs to bother with centering couplers when you can find an oversized bushing?
#228458 Modification and Paintjob Pictures
Posted by Zorns Lemma on 05 May 2009 - 11:09 PM in Modifications
#261513 Modification and Paintjob Pictures
Posted by Zorns Lemma on 11 January 2010 - 06:26 PM in Modifications
The Sylow Conjugator
Bike pump. Same pressure as old pump, but in 1/3 as many pumps.
Shotgun attachment. 1/2" PVC stub in a 1-1/2" to 1/2" PVC slip bushing in a cut down 1-1/2" PVC coupler. Fits into any 1/2" coupler to adapt it to 1.5" PVC shells. 4" shells with 4 CPVC barrels.
Here's a spacer template:
I'm sure I could fit in 6 or 7 PETG barrels, but PETG doesn't fit my darts and brass is expensive. 4 is plenty anyways.
Super internals. 3/4" to 1/2" PVC slip bushing solvent-welded to tank. Epoxy putty on the shell around the bushing for more support and to take stress. External tubing in case I ever add a hard tank (also for the external OPRV). Tubing is put into both the bike pump and tank through superglue + solvent weld + goop (let set/cure at each stage).
1/8" PVC sheet + ABS/PVC cement + epoxy putty = invincible trigger.
Firing video:
http://www.youtube.c...a/0/WrFZiEcrcC0
#232175 Modification and Paintjob Pictures
Posted by Zorns Lemma on 24 May 2009 - 01:51 AM in Modifications
BBB has a replaced plunger head, spring overhaul, and a bunch of internal reinforcements to handle the ~36 lbs of draw force. NF is fairly standard mods, with the exception of a 1/2" PVC coupler rather than CPVC coupler.
BBB linked breech is a fairly standard 17/32", 9/16", and 19/32" brass and 1/2" SH40 PVC slide-breech with PVC tee to CPVC elbow. Around the dart slot area, I have the 1/2" PVC cut to fit the clip similar to the ones HeretiCorp was selling a while ago, and around that is 3/4" SDR 200 PVC to stabilize the LS/recon mags.
Fairly simple, as I whipped both guns together in around 4 hours from 1 AM to 5 AM the night before/day of the war.
#258056 Modification and Paintjob Pictures
Posted by Zorns Lemma on 05 December 2009 - 07:54 AM in Modifications
Bike pump. Same pressure as old pump, but in 1/3 as many pumps.
Shotgun attachment. 1/2" PVC stub in a 1-1/2" to 1/2" PVC slip bushing in a cut down 1-1/2" PVC coupler. Fits into any 1/2" coupler to adapt it to 1.5" PVC shells. 4" shells with 4 CPVC barrels.
Here's a spacer template:
I'm sure I could fit in 6 or 7 PETG barrels, but PETG doesn't fit my darts and brass is expensive. 4 is plenty anyways.
Super internals. 3/4" to 1/2" PVC slip bushing solvent-welded to tank. Epoxy putty on the shell around the bushing for more support and to take stress. External tubing in case I ever add a hard tank (also for the external OPRV). Tubing is put into both the bike pump and tank through superglue + solvent weld + goop (let set/cure at each stage).
1/8" PVC sheet + ABS/PVC cement + epoxy putty = invincible trigger.
#302799 Homemades Picture Thread
Posted by Zorns Lemma on 04 August 2011 - 09:50 AM in Homemades
OMG I PUT A HANDLE ON IT
#308153 Homemades Picture Thread
Posted by Zorns Lemma on 09 December 2011 - 01:41 PM in Homemades
Built on the fallopian rev 2 platform
It's like Christimas
#327738 Homemades Picture Thread
Posted by Zorns Lemma on 07 March 2013 - 12:22 AM in Homemades
This stuff is amazing. It lets you take a bunch of does-not-fit tubes and makes them into slides-super-well tubes.
#327784 Homemades Picture Thread
Posted by Zorns Lemma on 08 March 2013 - 12:51 AM in Homemades
#301561 Homemades Picture Thread
Posted by Zorns Lemma on 14 July 2011 - 10:43 PM in Homemades
#316382 Homemades Picture Thread
Posted by Zorns Lemma on 31 May 2012 - 11:11 PM in Homemades
#327365 Homemades Picture Thread
Posted by Zorns Lemma on 26 February 2013 - 08:38 PM in Homemades
Priming action now super smooth from the pump grip part — just need to redo the catch plate now
#325429 Homemades Picture Thread
Posted by Zorns Lemma on 18 January 2013 - 12:18 AM in Homemades
#325904 Homemades Picture Thread
Posted by Zorns Lemma on 27 January 2013 - 12:11 PM in Homemades
#324643 Homemades Picture Thread
Posted by Zorns Lemma on 21 December 2012 - 12:17 AM in Homemades
30" including barrel.
#300503 Homemades Picture Thread
Posted by Zorns Lemma on 25 June 2011 - 12:31 PM in Homemades
Needs a handle. Or I can wield it hamp-style.
#323619 Homemades Picture Thread
Posted by Zorns Lemma on 15 November 2012 - 11:43 PM in Homemades
Pump:
#326901 Homemades Picture Thread
Posted by Zorns Lemma on 16 February 2013 - 12:01 AM in Homemades
#279634 Homemades Picture Thread
Posted by Zorns Lemma on 06 July 2010 - 05:10 PM in Homemades
ZOMG ZOMG
#259343 Homemades Picture Thread
Posted by Zorns Lemma on 19 December 2009 - 01:34 AM in Homemades
Mod party, yay! Or in the eyes of some people, dick-waving time.
One of Zorn's contracts. 3B, homemade internals.
#267248 Homemades Picture Thread
Posted by Zorns Lemma on 27 February 2010 - 05:53 PM in Homemades
I'll get around to the write-up someday...
#266692 Homemades Picture Thread
Posted by Zorns Lemma on 23 February 2010 - 10:42 PM in Homemades
Xbow internals
#264526 Homemades Picture Thread
Posted by Zorns Lemma on 06 February 2010 - 06:44 PM in Homemades
#261418 Homemades Picture Thread
Posted by Zorns Lemma on 10 January 2010 - 07:43 PM in Homemades
Mod party, yay! Or in the eyes of some people, dick-waving time.
One of Zorn's contracts. 3B, homemade internals.
It shoots (awesome) now, but I need to put some finishing touches on it and some small quality-of-life and make-sure-gun-doesn't-explode tweaks.
#269106 Homemades Picture Thread
Posted by Zorns Lemma on 14 March 2010 - 07:58 AM in Homemades
#269134 Homemades Picture Thread
Posted by Zorns Lemma on 14 March 2010 - 03:49 PM in Homemades
How did you connect the PAS plunger head to the plunger rod?How to do a real PullAS, the P-AS:
Drill a hole down the center and tap the plunger rod.
I actually scrapped using the PAS head and went with just a +bow head and +bow plunger tube, since the PAS plunger tube was a bit short and I have yet to find the correct thinwall PVC that replaces it.
#278348 Homemades Picture Thread
Posted by Zorns Lemma on 23 June 2010 - 03:00 AM in Homemades
Dude, that's great. Where'd you get the polycarb?
Go to your hardware store and look for Lexan.
ZOMG I FINALLY ENCODED A VIDEO ... hoorary for manual muxing because no competent free video editor works with whatever proprietary shit my camera encodes in...
#224517 Homemades Picture Thread
Posted by Zorns Lemma on 20 April 2009 - 04:40 AM in Homemades
Slide breech for a PAS. 12" 9/16 barrel (11.75" of real barrel, due to .25" of dart stop) nested in 19/32" brass with 1" male stub for nesting into internal PVC or 5/8" brass and 2" dart slot.
2 check valves. Nothing special here. Client has yet to specify open tubing or built-in barbed connectors, so it is open tubing for now.
A 2-step trigger (different client) is currently curing. Will do a battery of tests and, barring any problems, ship it out in the morning.
#278340 Homemades Picture Thread
Posted by Zorns Lemma on 23 June 2010 - 02:00 AM in Homemades
Made myself the most comfortable foregrip ever, and it uses 1/2" PVC connectors rather than airsoft rails.
OH MAH GOD WHAT COULD IT BE?
P.s. fuck CAD and printing templates. Ruler+compass+scanner (maybe a dash of calipers and protractor) is way faster/easier.
#276910 Homemades Picture Thread
Posted by Zorns Lemma on 05 June 2010 - 06:43 PM in Homemades
Molded 1/8" PVC back plate mounted on pieces of 1/4" for support. Inspired by JLego's +bow and Hipponater's work on Beaver's +bow.
Screwed on an actual cheek plate.
Plasti-dip handle
Suboptimal!
#258055 Homemades Picture Thread
Posted by Zorns Lemma on 05 December 2009 - 07:11 AM in Homemades
And I want to make them shoot more than your penis gun
#297901 Homemades Picture Thread
Posted by Zorns Lemma on 06 May 2011 - 10:01 PM in Homemades
- NerfHaven
- → Zorns Lemma's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·