- NerfHaven
- → NerfMonkey's Content
NerfMonkey's Content
There have been 1000 items by NerfMonkey (Search limited from 13-May 97)
#86292 Stereoscopy
Posted by NerfMonkey on 02 August 2006 - 12:46 AM in Off Topic
Stereoscopy is the process of combining two 2D images to form one 3D image. You take two images at two slightly different angles from the subject and put them backwards, so that the image at the angle your right eye would normally see the subject at is on the left and vice versa. If you don't get it check out the Wikipedia article on it. http://en.wikipedia....iki/Stereoscopy
I created one and it's really quite easy. It doesn't seem to involve as much calculation as you might expect to get the angles good enough. This is the only one I've done so far. I know it's boring but it was mainly just a test. Look at these two pictures and cross your eyes. You should then see one 3D image in the middle of two 2D images. The fan and the backpack to the right of it stand out the most.
http://img86.imagesh...ge=3dfanai0.png
So, has anyone else tried making these kinds of pictures or any other interesting things like that when they were bored?
#69996 Ballgun Stefan Mod Writeup
Posted by NerfMonkey on 27 December 2005 - 09:03 PM in Modifications
Thread
If I'm not allowed to link to my mod on another site, please tell me and I'll try to figure out a way to post the whole thing here.
#46433 Johnny Carson Dead
Posted by NerfMonkey on 23 January 2005 - 07:15 PM in Off Topic
#62260 At3k+brass
Posted by NerfMonkey on 19 August 2005 - 07:31 PM in Modifications
EDIT: Brass is fine. "The barrel material is very difficult to find and can be replaced with 9/16" OD K&S brand brass tubing for very similar performance."
-cx's AT3k mod.
#66412 Nerf Experiences
Posted by NerfMonkey on 23 October 2005 - 02:18 PM in General Nerf
#50764 Nerf Wars In Oh Anybody?
Posted by NerfMonkey on 27 March 2005 - 06:48 PM in Nerf Wars
#350787 Team Maximizer UNITE!
Posted by NerfMonkey on 15 January 2016 - 01:46 PM in Off Topic
Fucking ouch.
Never mind; I thought it was exploded.
#97376 Rf20 Ideas
Posted by NerfMonkey on 29 December 2006 - 07:09 PM in General Nerf
Two has been done and written up.
Three is just stupid.
Four...we don't give a fuck if you're puking on the floor, this thread sucks. Try these ideas on your own instead of telling all of us to give you pictures of them and stay off the forums when you're drunk.
#118742 Yellow Nf Spring Vs Older Nf Spring
Posted by NerfMonkey on 07 August 2007 - 07:06 PM in Modifications
#130404 Green Scheme
Posted by NerfMonkey on 22 November 2007 - 10:51 PM in General Nerf
I bought one of those packs a few weeks ago and posted a writeup for the Single Teks which includes pictures of the green Big Blasts.
#359109 University of Akron Nerf War, April 21st!
Posted by NerfMonkey on 08 April 2017 - 07:08 PM in Nerf Wars
I'm going to try to get out to this one since it's only an hour drive for me. Got a rough headcount?
#104409 Pumping On My At2k Is Messed Up
Posted by NerfMonkey on 07 May 2007 - 05:23 PM in Modifications
#152072 Troubleshooting Section
Posted by NerfMonkey on 19 April 2008 - 06:33 PM in Site Feedback
#133739 Unfriendly Handshake
Posted by NerfMonkey on 24 December 2007 - 09:43 PM in Modifications
I couldn't follow that very well.
What's so hard to follow? He took a Ripchord turret and stuck it on a Ball Blaster.
If you reduced the amount of barrels to three (either by plugging two of those or just putting in three homemade ones) it would probably get higher and more consistent ranges. I put seven barrels in mine but didn't realize that was way too many, but I think three would be good. Nice concept anyway, even if the ranges are shit.
#82783 Hamma Time!
Posted by NerfMonkey on 05 June 2006 - 03:44 PM in Off Topic
Happy birthday dude!
#356395 Mega Double Breech- NOT a shotgun!
Posted by NerfMonkey on 24 October 2016 - 08:25 AM in General Nerf
Looks pretty cool to me, aside from the whole not firing thing. It reminds me of a giant Sharpshooter II, which was always one of my favorite blasters. I'll probably end up buying one unless somebody on here takes one apart and proves that it's a piece of crap. I'm a sucker for big springers. Thanks for the info!
#108459 Magstrike, Pc Ranges?
Posted by NerfMonkey on 30 May 2007 - 09:22 PM in General Nerf
Like CS said the ranges are around the same, but my Magstrike got a few feet (maybe 5) on my PCs, probably because the clips are a tighter fit on my Stefans.
#81965 Yet Another Sharpshooter 2 Mod
Posted by NerfMonkey on 17 May 2006 - 05:02 PM in Modifications
#309453 R.E.S.O.L.U.T.I.O.N.
Posted by NerfMonkey on 13 January 2012 - 04:22 PM in Nerf Wars
#84142 Rapid Fire 20 Pumping Problem Thingy.
Posted by NerfMonkey on 01 July 2006 - 05:43 PM in General Nerf
Your o-ring on the pump might not be making a proper seal anymore; it could also have a leak in the tubing. If it's the o-ring you'll need to buy a new one and if it's the tubing you'll need to replace it or find a way to patch it up. Use Plumber's Goop to fix the tubing or use 1/4" OD vinyl tubing to replace the broken section. If it's the o-ring you should be able to find a new one at a hardware store, or so I've heard.
Good luck.
#69913 Nerf Rpg
Posted by NerfMonkey on 26 December 2005 - 10:50 PM in Homemades
#49862 Air Tech 3000 Problem
Posted by NerfMonkey on 16 March 2005 - 10:50 PM in General Nerf
#50557 Airzone Crossbow
Posted by NerfMonkey on 25 March 2005 - 10:04 PM in General Nerf
#49819 Air Tech 3000 Problem
Posted by NerfMonkey on 16 March 2005 - 07:14 PM in General Nerf
EDIT:Wait, it rotates, sorry. There is a severe leak in it, though.
#47126 First Shot Cpvc
Posted by NerfMonkey on 12 February 2005 - 12:21 PM in Modifications
#46486 Lbb Finished
Posted by NerfMonkey on 24 January 2005 - 07:26 PM in Modifications
#46511 Lbb Finished
Posted by NerfMonkey on 24 January 2005 - 10:33 PM in Modifications
#51428 New Color Scheme
Posted by NerfMonkey on 02 April 2005 - 10:51 PM in General Nerf
EDIT: Here's the link if you want to see it.
#53111 Ammo
Posted by NerfMonkey on 21 April 2005 - 04:34 PM in Homemades
#66750 Anyone For Some Discussion?
Posted by NerfMonkey on 28 October 2005 - 11:31 PM in Modifications
As for the Firefly, I don't like them. The same friend with the CPVC Mav has one; he says he's going to CPVC it, so we'll see how that goes. I don't think there have been any mods other than restrictor removal and spring replacement (with some reinforcement of course).
I got my BBB for $20, but I think some places still have them at $25. As Uncle Hammer said, they're only at TRU and I like mine. I use it a lot because of its solid feel.
Basically, the Mav has a little potential, but not a lot, and the Firefly I'm not too impressed with. It's horribly uncomfortable and only gets about 40' flat with the restrictor mod and I can't see it getting any more with CPVC.
#305056 Possible Place for a nerf war
Posted by NerfMonkey on 27 September 2011 - 12:16 AM in Nerf Wars
EDIT: Telling people you suck isn't a great way to get them interested either. Have some balls man. Good luck if you end up hosting a war.
#63207 Prototype Trampoline Spring Nerf Cannon
Posted by NerfMonkey on 06 September 2005 - 06:14 PM in Homemades
Anyway, I like it. I never thought to use a spring like that, I always thought you had to use a spring like in the stock guns.
EDIT: Oh, I get it. Never mind, looks really good.
#59141 1/2" Pvc
Posted by NerfMonkey on 12 July 2005 - 03:12 PM in Modifications
You should start using Stefans too, unless you can't find materials.
#57829 Gotcha Ball Blaster
Posted by NerfMonkey on 20 June 2005 - 05:17 PM in General Nerf
That it?
#73065 Airtech 3k Mod Problems
Posted by NerfMonkey on 13 February 2006 - 05:11 PM in Modifications
If you plan on doing this, just take some 1/4" outer diameter vinyl tubing and replace the stock 3k tubing with that. Connect it with Plumber's Goop to both the 3k tank and the new pump you're using. You probably won't be able to keep the cool shotgun-esque pump, but it would be a lot better to have a working gun with a new pump in it.
#72877 Supermaxx Buzzer Air Bazooka?
Posted by NerfMonkey on 11 February 2006 - 07:40 PM in Modifications
EDIT: So break it off? If it's just a plastic piece snap it. And not all missile weapons like that have an O, I have no idea what you mean; the Titan and Blast Bazooka don't, and neither does the Maxshot.
#50574 Ghostbusters Gun
Posted by NerfMonkey on 26 March 2005 - 12:20 AM in General Nerf
Ghostbusters gun I saw this on ItalionStallion's site and that was the only place I saw an actual review of it. I've heard it was the first ever foam firing gun.
#82398 Broken Powerclip
Posted by NerfMonkey on 27 May 2006 - 06:47 PM in Modifications
#83629 Smax 3000 Mods
Posted by NerfMonkey on 23 June 2006 - 12:42 AM in Modifications
Use the search function here and use Google. I'm not going to provide links because hopefully this will discourage future threads like this. You won't get a warm reception here if you don't take the time to search before asking a question.
#89415 Is It Possible?
Posted by NerfMonkey on 09 September 2006 - 04:49 PM in Modifications
About the mod. Just try it and see if you can do it, I'm not sure though because the walls of the Crayolas are very thin so you can't really sand them down to fit. I think your best bet would just be to do what some others have done to their Scouts and simply remove the peg. Or you can go to www.freewebs.com/sdnerfteam/sqiggssmods.htm and find his Crossfire mod. It's the second one down. I never really saw it shoot but it got pretty good ranges supposedly. It's fairly simple too. If you don't have access to CPVC (I can't imagine you don't), or you just really want to nest a barrel in the stock one, you could always go with a paper barrel. It sounds dumb but if you just take a sheet of paper and wrap it around your dart, and then tape it in a tube shape and cut it to the right length, they actually work decently. You can get a perfect custom fit for your own Stefans (or stock darts) and can add tape as necesary to get it to fit in the stock barrel. Good luck.
- NerfHaven
- → NerfMonkey's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·