- → Pineapplepies's Content
There have been 132 items by Pineapplepies (Search limited from 14-January 93)
Edit:Seems like racer was right, they do work in flywheels. I tried the darts in my Stryfe and they worked, but not in the Demoliser though.
Do you know if they hurt as much as the hard plastic tip darts? I have some solid plastic ones and need solid rubber darts that don't hurt as much.
Just received my glow darts from vwillshop777. They seems to be a good quality and compatible with elites. They do NOT have a hole in the tip either. The tip feels as if it is pure rubber. I may dissect one and post it here if people are interested.
You could always cut down elite darts, since I belive the rubber tips would feed well, but correct me if I am wrong please.
So I searched around and couldn't find anything about this. Some dude on Reddit told me there would be problems. I didn't understand what he meant so if someone could tell me what would happen, it would be nice.
I have heard that happening before as a result of the AR springs, which is why the instructions say don't store darts in the gun. I would suggest either try new darts or find new AR springs if they exist.
As anyone who owns a roughcut knows, the darts in the barrel are constantly popping out, so my question is, does anyone know any good ideas about how to fix this?
Any suggestion is welcomed
How did you mod it, spring mod, or did you take everything out like the picture? Along with that, why did you want to mod a deploy in the first place?!?!
How can I rebuild my Deploy CS-6? I modded it but can't rebuild it. I alredy searched and can't find anything. I have get out all pieces like in here. I need a step by step instruction, but a video would be perfect. Can someone please help me?
So has anyone tried these or know if they are worth to buy, since they look like they may have more traction to them than regular flywheels.
What if I have a titan and am using cpvc from Lowes for barrel material? I currently have around a 10 inch barrel and am wondering if I should add 6 inches of cpvc or more.
It matters what tank. If its a mid volume one like a at3k/2k then 12in of airgun fit. If its a larger volume blaster like a big blast it will need 16-20 depending on dart fit. Some air guns like the sm1500 have a faster air release, which means you should tighten up your barrel so its atleast a push fit. This is mostly just my opinion, from what ive read and seen from videos, but i may be wrong and if i am please correct me below.
I think what Snake is saying is bring the China darts and check them in with him to see if we can use them or not. I personally am using them for my Titan(Chunlin darts, which are way softer than FVJ's) and FVJ's for my modded Demolisher and stock Wildfire.
So is that a yes or no to China darts?
Reason why I bring this up is because I am wondering if this should be bought, since this could possibly make re-barreling a mega gun very easy and would be a very good for a noob at modding.
Bobololo has a review of the cyclone shock set on eBay and walcom27 has the rotofury set reviewed as well. Might help you make a decision.
Thank you for telling me, those videos are great but still didn't answer the one thing both of them forgot to test. That thing is if it works better with Fvjs and those accurate darts, thank you anyway though.
Have you tried running the gun with regular batteries since then its possible you burned out the motors its a problem that eventually occurs when you overvolt them.
Yes I have, it is not broken, it seems some of the batteries are.
I won't repeat what others have said about mixing chemistries, but I am going to ask:
Is the demolisher stock? You may be tripping the PPTC (thermistor) in the blaster if you didn't remove it.
It is completely stock, nothing done to it except the batteries have been changed. It also has only 2 trustfires, and 2 alkalines, since the PPTC was tripping with three trustfires and one dummy.
Anyone use 3rd generation Koosh darts in a Rapidstrike? I noticed every 6 or so shot out of the my Rapidstrike tend to twirl, spin out, or helicopter.
Anyone else observe this and if so, do you know what the cause is and how to fix it? I wonder if removing the skirt might help?
There is a way to remove the skirt, and although it may not help, I would still do this anyway since removing the skirt lowers the chance jamming by a lot. What you need to do is open up the jam door without a clip in(make sure there is no way the flywheels can activate) and stick you finger in the part where the darts enter into the flywheels. Then bend your finger down and around and then yank it out. If it does not work try getting at it in a different way or use really long needle nose pliers
Thanks for the advice. I'm looking into transitioning to using a Stryfe, but I will probably remove the skirt to see if that fixes the problem. I question whether it will, because I understand that skirt helps center the dart before going through the flywheels and I imagine the spinning out is due to some darts existing the flywheels off center (just a theory).
Also, I never have jamming issues (although I'm just running 6 NiMH cells).
I didn't know that the skirt did that, since it didn't do anything wrong to my freind's Demolisher when I took off the skirt because would not stop jamming.
Not sure if it is too late, but I would think you may want to try and see if the switch feels like it is stuck. If it is and that is the problem, then try pulling the trigger all the way. To my knowledge, both the Stockage and the Barricade will jam like that from time to time since the pusher arm will get stuck.
Hey, I've found no help this far. I bought my son one of these. he is not strong enough to prime or pump anything else so far. I pulled it out and decided to try it before wrapping it for Christmas. After switching it on 3 times and empty out the darts each time, it will no longer power on. Every soldering point looks intact. Batteries were RAYOVAC brand new. In typing this I realize I could go buy better batteries. Still any feedback would be so much appreciated!!
Thank you very much
If you don't care about being shamed by the nerf modder masterrace i think it is a definitely good purchase.
People can call me a newB for this but who cares: I bought the rebarreling kit from worker and pushed them into a cycloneshock, BOOM! instant gratification my cycloneshock now shoots koosh darts as accurately and as far as most modified springers and the "mod" only took about 16 seconds.
Thank you, that answers my question about knock off darts. I just had that feeling during bobololo's review that the horrible accuracy was due to the flaw in elites, and sure enough I was correct!
Do yo u have the link for the chunlin darts? They've been taken off of amazon.
This should work, sorry for not shorting the link to one word but I couldn't find how to do it with the new interface. So if someone knows how to make a long url show up as a single word please tell me.
I don't have a Titan or a Demolisher, but I was hoping if someone could tell me whether or not a Titan would be able to shoot the new missiles that come with the Demolisher or the Thunderblast.
It cannot shoot Demolisher rockets, but if you put a simple Cpvc barrel with duck tape wrapped on the outside it can. Only problem is that I have experienced Titan barrels not wanting to unscrew before, which would lead to it being harder to rebarrel it to shoot elites/missiles.
http://www.amazon.co...rts bullet head(where I bought mine)
Yeah, I know it is not good to mix batteries, I already had a topic about that. Also, Yes, it does still work just fine.
Is this a normal unmodded demolisher, or doesn't have just basic mods (lock removal, etc)?
Mixing batteryou brands and types is never good, mixing trustfire and generic AA could have damaged your motors.
So the question is, does it still rev if you use just generic AA batteries?
Well why do you think I got the protected ones? Along with that, could you link a charger for the IMR's if there is any?
IMRs are good. If used with stock motors use no more than two. Use "dummy batteries" like these, not more AA batteries to fill the other spots.
NIMH rechargeables like Eneloops are also good. With stock motors you can use four.
Trustfires and Ultrafires are horrible and may explode on you and/or burn your house down.
No matter what, a full rewire (or even full internal upgrade including microswitches and a lipo connector) will be complimentary or even required.
Ok, but the only problem is that I don't know where to get the wire for rewiring my Demolisher. I also have not attempted anything like that so if you can tell me where I can find a tutorial on how to rewire and remove locks like the thermoresister that would be great since I don't want to end up blowing my self up when I severe the wrong wire.
This looks pretty appealing beyond the black foam color.
I know where to find things like with with different colors, only problem is that they are plastic tipped but if you are fine with that here they are. http://www.ebay.com/...a0AAOSw3ydV3LHt
In no way do I mean to be a jerk or rude to you, but I would recommend to get those off of eBay by searching nerf darts bullet head and scrolling down. The price of them gets down to about $4 for 100 and that is about three times less than the ones on Amazon.http://www.ebay.com/...a0AAOSw3ydV3LHt
I have seen both of these on Amazon, and they appear to have solid rubber heads. Not as squishy as these black ones, but still better than FVJs.
Those are FVJs, a different kind of dart. They are good as well but not really as good for shooting from heavily modded blasters or homemades.
Yeah, I know they are like Fvjs. I was pointing out if you want a aerodynamic dart and need to fire it out of high powered thing then those are the darts to go with, along with them being more brightly colored.
Yeah, in a way they are, Walcoms7 did a video on them and I believe they have equal if not more weight(since they head has more volume) They lowest price I have found them for is around the same of the lowest you can find Fvj's for, so these may be a alternative.(Walcoms7's review is on YouTube, look under videos and it should be near the top, although the ones he reviewed were the ones on Amazon. They still are the same dart though)
Oh, ok. So are those better than the china darts? I would think they would be lighter but I haven't weighed them so I'm not sure. I may order some if someone's tested them in the same way as these to make sure they fire from hoppers from homemades as straight as regular Stefans.
Edit:Sorry, I didn't read what you said about them firing straight out of a gun until now. Walcom did fire them out of a Longstrike with a Berzerker tank in his review and I believe they fired well.
Wait so should I not be using the trustfires, or was that just a result of overcharging which is something I am in fact aware of.
Good demolisher rewire tutorial: https://www.youtube....h?v=fsj_G2gGxoc
Never rewire while a battery is attached. Follow that rule, and cuttin g a wire will never result in things blowing up.
After a rewire, always test with normal AA batteries first. If they heat up or act weird, you have a short (which would be bad with the various lithium batteries). If everything seems good, then put in your NiMH'lithium/whatever batteries.
Again, not trying to be rude but above I said Walcoms7 on YouTube did do a review on this type of dart and it worked fine out of his berserk long strike, so yes they do fly as a well as a Fvj but are as aerodynamic as a ACC or bullseye(As 2ndbluesbros proposed and I liked)
Looks like the VTNs are lighter so they may not work as well as ACCs out of high velocity blasters, but no way to know for sure but to try.
One thing the ACCs have going is it seems like they have a short stem. This means that a) most of the weight is in the actual tip (better for flight stability) and they will bend easier when going through a hopper.
Edit:If there was a comparison between the bulleyes and the cut down Fvn darts to slugs and stefans, it would be stefans to Acc, and Fvns being a more aerodynamic slug
Which darts are you talking about, Fvn or bullseyes/ACCs? If you are talking about the darts this post is about, Acc darts, then they fly very straight for the most part. Along with that, these are the most accurate and farthest flying darts I have when fired out of a Titan too so that answers the high powered blaster question.
Alright, fine, I'll listen to Walcom's yammering
Anyway, yeah they do seem lo launch well in his video. I would still want to actually see how they fly over long distances, and out of a homemade springer. For instance do they seem to "float" after a while, do they suddenly drop, or do they maintain their velocity nicely like well made hot-glue domes with heavy weights?
Now at first I thought WHAT THE HECK IS THIS(which anyone would due to how weird this looks), but then I decided I may as well ask if anyone has any info on these type of knockoffs and wether or not I should try one out.